LUX DL50, stropní svítidlo 5 W, bílý kryt

The Garmin LUX DL50 downlight is a 5-watt recessed marine luminaire designed for interior and exterior lighting on vessels. It provides CRGBW (cool white, red, green, blue, warm white) full-spectrum lighting with adjustable white color temperature ranging from 2700K (warm white) to 6500K (cool white). Its ultra-thin 2 mm front protrusion profile allows discreet integration on flat surfaces.

The LUX DL50 downlight provides full-spectrum CRGBW lighting, meaning it can produce cold white, red, green, blue, and warm white. The white color temperature is also adjustable, ranging from 2700K (warm white) to 6500K (cold white).

Yes, the LUX DL50 downlight is designed for installation both indoors and outdoors. It is rated IP68, ensuring complete protection against dust and temporary immersion. It can be installed in wet areas but is not designed for permanent submersion.

The Garmin LUX DL50 downlight has a nominal power rating of 5 watts. The actual power consumed is approximately 4.5 watts per light.

The LUX DL50 downlight operates on a direct current (DC) voltage range of 10.5 to 31 volts.

The typical power consumption of the LUX DL50 downlight is 0.37 amperes at 12 volts and 0.18 amperes at 24 volts.

The LUX DL50 downlight allows adjusting the color temperature of white from 2700K (warm white) to 6500K (cool white), providing flexibility for different lighting ambiances.

The LUX DL50 downlight housing is made of hard-anodized aluminum, providing robustness and corrosion resistance suitable for marine environments. It also features a white trim ring.

Yes, the rear of the light fixture may become warm to the touch during operation. However, this will not damage the mounting surface.

To install the LUX DL50 downlight, you will need to cut a hole with a diameter of 50.80 mm (2 inches). The required mounting depth is 28.30 mm (1.11 inches). The front diameter of the luminaire is 64 mm.

For indoor installations, use the supplied spring clips. After cutting the 50.80 mm hole, gently pull the spring clips backward and insert the luminaire into the hole, releasing the clips once the downlight is in place. Ensure the surface is flat.

For outdoor installations or in damp areas, it is recommended to secure the light fixture using marine-grade adhesive or sealant. Remove the spring clips from the fixture, apply a small amount of adhesive around the glass collar, and press the fixture into place while rotating slightly to spread the adhesive evenly. Clean off any excess adhesive with a soft cloth and soapy water (do not use chemical cleaners).

No, the LUX DL50 downlight must be mounted on a flat surface to ensure correct installation and optimal waterproofing.

Before any installation, always ensure that the vessel's power source and battery are disconnected or isolated to prevent any electrical risk.

It is strongly recommended that a qualified professional carry out the electrical and mechanical installation of the LUX DL50 downlight to ensure safety and compliance with standards.

The LUX DL50 downlight is designed to operate exclusively with the Lumishore LUX Downlight control module. This module manages the dimming and color functions of the luminaire.

No, it is essential not to connect the LUX DL50 downlight to third-party lighting control products or dimmers. It must be used exclusively with the Lumishore LUX Downlight control module, otherwise the warranty will be void.

No, the Lumishore LUX Downlight control module is specifically designed to work only with Lumishore LUX LED strip lighting products. Using it with LED strips from other brands will void the warranty.

Lumishore lighting systems, including the LUX DL50 downlight, are warranted against manufacturing defects for a period of three years from the original purchase date.

The warranty may be voided in case of misuse, abuse, improper installation, negligence, damage caused by disasters (fire, flood, lightning), installation by unqualified personnel, unauthorized repair or modification, or failure to comply with the installation, maintenance, and usage instructions provided in the document.