LUX DL50, Downlight, 5 Watt, Black Bezel - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 11%

Garmin

010-04447-00

LUX DL50, stropní svítidlo 5 W, černý rámeček

Conçu pour un éclairage marin polyvalent, le downlight Garmin LUX DL50 5W offre un spectre CRGBW complet et un blanc tunable (2700K-6500K). Son design ultra-plat et son indice IP68 le rendent idéal pour les installations intérieures et extérieures, avec une intégration aisée via le module de contrôle Lumishore LUX (non inclus). Le produit inclut les clips de fixation à ressort et un cadre noir.

Prix publicBénéficier du tarif pro

3.309,90 CZK

3.309,90 CZK ~~3.733,51 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Provozní napětí	10.5-31 VDC
Typická spotřeba elektrické energie	4.5 W
Dvoubarevný bílá/červená	Oui
Průměr instalačního výřezu	50.8
Hloubka zapuštění	30.3
Vnější průměr	64.0
Výška	2.0
Hlavní materiál tělesa	Aluminium anodisé
Stupeň krytí IP	IP68
Kompatibilní s stmíváním	Oui
Oblast použití	Marin
Barva rámečku	Noir
Povrchová úprava	Anodisé dur
Cleaning Recommendation	Nettoyer l'excès d'adhésif avec un chiffon doux, du savon et de l'eau. Ne pas utiliser de nettoyants chimiques.
Compatible Control Module	Lumishore Lux Downlight Module
Control System Compatibility	Lumishore Lux Downlight Module uniquement
Current Consumption Max 12v A	0.5
Current Consumption Max 24v A	0.25
Heat Dissipation Note	Le dos du luminaire peut devenir chaud au toucher, mais ne causera pas de dommages à la surface de montage.
Installation Requirement	Professionnelle
Typ instalace	Encastré
Lighting Color Type	CRGBW (spectre complet)
Mounting Depth Behind Bezel Mm	49
Mounting Method Indoor	Clips à ressort
Mounting Method Outdoor	Adhésif marin
Typ montážní plochy	Plate
Power Consumption Typical 12v A	0.37
Power Consumption Typical 24v A	0.18
Typ výrobku	Plafonnier
Sealant Required Outdoor	Oui
Total Depth Mm	28.30
Usage Environment	Intérieur et extérieur

Description détaillée

Navrženo pro všestranné osvětlení na moři, stropní svítidlo Garmin LUX DL50 o výkonu 5 wattů s černým rámečkem je řešením pro osvětlení paluby i interiéru. Integruje osvětlení CRGBW s plným spektrem, včetně dedikovaných LED pro studenou bílou, červenou, zelenou, modrou a teplou bílou. Teplota bílé barvy je nastavitelná od 2700K (teplá bílá) do 6500K (studená bílá), což poskytuje flexibilitu pro různé atmosféry či funkční potřeby. Toto svítidlo je standardně plně stmívatelné.

Konstrukce a technické parametry

LUX DL50 je vyroben z eloxovaného hliníku s celokrytým tělem, které mu dodává stupeň krytí IP68. To jej činí vhodným pro použití ve vlhkých prostředích, a to jak uvnitř, tak vně lodi, i když není určen pro trvalé ponoření. Jeho ultraplochý profil o tloušťce 2 mm (0,079 palce) po instalaci a přední průměr 64 mm (2,52 palce) umožňují diskrétní integrace. Požadovaný průměr vyříznutí je 50 mm (2 palce) s montážní hloubkou 30,3 mm (1,2 palce).

Napájení a ovládání

Při provozu na napětí 10,5 až 31V DC má stropní svítidlo maximální proudovou spotřebu 0,5A při 12V a 0,25A při 24V, s průměrným výkonem 6W. Elektrická instalace je zjednodušena díky třížilovému kabelu. Pro pokročilé ovládání lze LUX DL50 připojit k modulu Lumishore LUX (není součástí balení) nebo k řídicímu centru EOS-LUX, což umožňuje integraci s kompatibilními multifunkčními displeji (MFD), displeji Lumishore či chytrými zařízeními. Jeden řídicí modul Lumishore LUX může ovládat až 16 stropních svítidel. Mechanická instalace se provádí pomocí pružinových spon pro vnitřní prostředí, nebo pomocí mořského tmelu/lepidla pro venkovní či vlhké oblasti, po sejmutí spon. Na tento výrobek se vztahuje tříletá záruka.

Documentations

Type	Nom
	Installation Guide - LUX DL50 Downlight Installation Guide (black)

Avis de l'expert

« Garmin LUX DL50 downlight analysis: CRGBW integration and versatility »

The Garmin LUX DL50 downlight is a versatile lighting solution for recreational vessels and small to medium-sized boats, whether sailboats or powerboats. Its ability to provide a full CRGBW spectrum with tunable white (2700K to 6500K) is a major asset, allowing for varied lighting setups—from functional cold white work lighting to warm ambient lighting, or even red light for night vision. This flexibility is particularly valued for cabin interiors, covered cockpits, or T-tops where lighting adaptability is essential.

Installing the LUX DL50 is simplified by its ultra-slim profile and two mounting options: spring clips for dry indoor areas and marine sealant for outdoor or wet installations. The shallow depth (30.3 mm) is a clear advantage in the confined spaces of marine ceilings. It is critical to note that to access all CRGBW features and dimming capabilities, this downlight requires the Lumishore LUX control module. Without it, it will likely function as a basic white luminaire, significantly limiting its technological value. This positions the LUX DL50 not as a standalone luminaire, but as part of an integrated lighting system, ideal for those seeking centralized control via a Garmin MFD or Lumishore display.

Despite its IP68 rating, confirming excellent resistance to dust and temporary immersion, it is important to note that the product is not designed for permanent submersion. It is therefore perfectly suited for areas exposed to splashes and moisture, but not for installations below the waterline. This model targets users seeking a sophisticated, integrated lighting solution rather than a simple LED spot, and who are prepared to invest in the Lumishore control ecosystem to fully exploit its potential.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX DL50, stropní svítidlo 5 W, černý rámeček

3.309,90 CZK

3.309,90 CZK ~~3.733,51 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What are the main lighting characteristics of the Garmin LUX DL50 downlight?

The Garmin LUX DL50 downlight provides full-spectrum CRGBW lighting. This includes dedicated LEDs for cold white, red, green, blue, and warm white. The white temperature is adjustable, ranging from 2700K (warm white) to 6500K (cold white), and the fixture is fully dimmable as standard.

What is the power consumption of the LUX DL50 downlight?

The LUX DL50 downlight has a rated power of 5 watts. Its maximum current consumption is 0.5A at 12V and 0.25A at 24V.

Is this downlight suitable for outdoor use on a boat?

Yes, the LUX DL50 downlight is designed for outdoor use and in damp areas. It features a hard-anodized aluminum construction and a fully sealed body, giving it an IP68 protection rating. It can be installed inside or outside the boat, but is not designed for permanent immersion in water.

What are the dimensions of the Garmin LUX DL50 downlight?

The LUX DL50 downlight features an ultra-thin 2 mm (0.079 in) profile after installation. Its front diameter is 64 mm (2.52 in). The required cutout diameter for installation is 50 mm (2 in), with a mounting depth of 30.3 mm (1.2 in).

What is the power supply voltage range for the LUX DL50 downlight?

The LUX DL50 downlight operates on a DC voltage range of 10.5 to 31V.

What material is the LUX DL50 downlight made of?

The LUX DL50 downlight features a hard-anodized aluminum construction and a fully sealed body.

Can the LUX DL50 downlight be used in wet areas?

Yes, the LUX DL50 downlight is fully sealed and can be installed in wet areas, indoors or outdoors. However, it is not designed for continuous submersion in water.

Is it possible to adjust the lighting color?

Yes, the LUX DL50 downlight integrates a full-spectrum CRGBW lighting system, allowing color adjustment. It includes dedicated LEDs for red, green, blue, cool white, and warm white. The white temperature is also adjustable from 2700K (warm white) to 6500K (cool white).

What precautions should be taken before installing the LUX DL50 downlight?

Before proceeding with installation, it is essential to ensure that the vessel's power source and battery are disconnected or isolated. Electrical and mechanical installation must be performed by a qualified professional.

What is the required cut-out diameter for installing the downlight?

The required cut-out diameter for installation is 50 mm (2 inches). It is recommended to cut the hole slightly smaller than necessary and then adjust it to the correct size to ensure a perfect fit.

How to install the LUX DL50 downlight in interior areas?

For indoor installations, use the provided spring clips. Gently pull the spring clips backward and insert the light fixture into the hole, releasing the spring clips once the fixture is in position.

How to install the LUX DL50 downlight in outdoor or wet areas?

For outdoor installations or in damp areas, it is recommended to secure the light fixture using suitable marine sealant/adhesive. Remove the spring clips from the light fixture and apply a small amount of adhesive around the glass lens. Push the light fixture into place while rotating slightly to spread the adhesive evenly. Clean off any excess adhesive with a soft cloth, soap, and water. DO NOT use chemical cleaners.

On which type of surface should the downlight be mounted?

The downlight must be mounted on a flat, non-curved surface.

Can the downlight get hot during operation?

The rear of the light fixture may become hot to the touch, but this will not damage the mounting surface.

How to clean up excess adhesive after installation?

Remove any excess adhesive using a soft cloth, soap, and water. Do NOT use chemical cleaners.

Which control module is required for the LUX DL50 downlight?

The LUX DL50 downlight is designed to be used in conjunction with the Lumishore Lux Downlight control module. It must not be connected to third-party lighting control products or dimmers.

Can I connect the LUX DL50 downlight to a dimmer from a different brand?

No, the LUX DL50 downlight is designed to be used exclusively with the Lumishore Lux Downlight control module. It must not be connected to third-party lighting control products or dimmers.

Is the Lumishore Lux Downlight control module compatible with other lighting products?

The Lumishore Lux Downlight control module is designed to operate exclusively with Lumishore LUX LED strip lighting products.

Which actions can void the warranty of the LUX DL50 downlight?

The warranty for the LUX DL50 downlight may be voided in cases of misuse, abuse, incorrect installation, negligence, improper shipping, damage caused by disasters (such as fire, flood, storm, or lightning), installation by unqualified personnel, unauthorized repair or modification, or installations not approved by the manufacturer. Failure to comply with the installation, maintenance, and usage guidelines in the documentation also constitutes a breach of warranty terms.

Does using a non-Lumishore control module affect the warranty of the LUX DL50 downlight?

Yes, the LUX DL50 downlight is designed to be used only with the Lumishore Lux Downlight control module. The technical document states that using the Lumishore Lux Downlight control module with lighting strips from other brands will void the module’s warranty. Similarly, non-compliant installation, particularly the use of unapproved control products, may void the downlight’s warranty.