LUX Flood Light 4", Flood Light 4" - Garmin image 1

LUX Flood Light 4", Flood Light 4" - Garmin image 2

LUX Flood Light 4", Flood Light 4" - Garmin image 3

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 8%

Garmin

010-04459-00

LUX, LED reflektor 4 palce (10 cm)

Conçu pour l'éclairage marin polyvalent, le Lumishore LUX Flood Light 4" (distribué par Garmin) est un projecteur CRGBW de 1050 lumens, offrant un faisceau large pour les ponts et cockpits. Son corps en aluminium thermolaqué certifié IP68 assure une durabilité marine. Il s'intègre au système d'éclairage LUX de Lumishore pour un contrôle avancé via MFD ou smartphone.

Inclus : visserie M6 (boulon, rondelles, écrou à insert nylon) pour montage sur étrier. Pour le montage encastré, un gabarit est fourni (vis non incluses).

Prix publicBénéficier du tarif pro

5.730,42 CZK

5.730,42 CZK ~~6.234,46 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ výrobku	Projecteur
Rozsah provozního napětí	10-31
Typická spotřeba elektrické energie	22
Světelný tok	1050.0
Úhlová šířka paprsku	80.0
Barva světla	Blanc froid, Rouge, Vert, Bleu, Blanc chaud
Materiál krytu	Aluminium thermolaqué de qualité marine
Barva / povrchová úprava	Blanc, Noir
Stupeň krytí IP	IP68
Kompatibilní s stmíváním	Oui
Kompatibilní zobrazovače	MFD
Typ světelného paprsku	Ovale ultra-large
Material Finish Type	Thermolaqué
Max Operating Voltage Dc	31
Min Operating Voltage Dc	10
Mounting Fastener Diameter Mm	6.5
Typ montáže	Support, Encastré
Power Consumption Amps Max	1.7
Power Consumption Max Voltage V	12
Záruka	3

Description détaillée

Navržen pro všestranné osvětlení na moři, reflektor Lumishore LUX Flood Light 4" (distribuovaný společností Garmin) je CRGBW reflektor (studená bílá, červená, zelená, modrá, teplá bílá) o výkonu 1050 lumenů, který poskytuje úplnou škálu barev pro osvětlení palub, kokpitů nebo jako všeobecné bezpečnostní osvětlení. Na rozdíl od standardních námořních světel se tento model vyznačuje schopností vytvářet široké světelné spektrum, včetně teplých a studených bílých odstínů, na rozdíl od monochromatických nebo dvoubarevných reflektorů. Jeho oválný ultraširoký paprsek o úhlu 70 až 90 stupňů, optimalizovaný pomocí přizpůsobených difuzních optik, zajišťuje úplné pokrytí a rovnoměrnost barev v osvětlené oblasti.

Konstrukce a technické parametry

Reflektor LUX Flood Light 4" pracuje s napětím 10,5 až 31 VDC, s maximální spotřebou proudu 1,7 A při 12 V a průměrným výkonem 22 W. Jeho robustní konstrukce z eloxovaného hliníku námořní kvality, spojená s matovanou čočkou, mu poskytuje certifikaci IP68, zaručující ochranu proti prachu a dlouhodobému ponoření, což je v námořním prostředí zásadní. Tato odolnost je podpořena tříletou zárukou. K dispozici v bílé nebo černé povrchové úpravě, ladí diskrétně s různými konfiguracemi lodí, ať už na T-topy, obloucích nebo zádi.

Integrace a systémové ovládání

Integrace je silnou stránkou reflektoru LUX Flood Light 4". Lze jej ovládat prostřednictvím kompatibilního multifunkčního displeje (MFD) Garmin, specializovaného displeje Lumishore, chytrého zařízení nebo jednoduchého okamžitého spínače. Jako součást sbírky osvětlení LUX od Lumishore umožňuje tento reflektor přesné ovládání CRGBW, nastavení intenzity a vyvážení bílé, používání předem definovaných scén a dynamických efektů, jako je stroboskop, skenování, barevné cykly nebo synchronizace se zvukem. Tato integrace jej řadí mezi klíčové prvky inteligentního a sofistikovaného osvětlovacího systému, který nabízí větší flexibilitu a funkce než samostatná osvětlovací řešení.

Documentations

Type	Nom
	Installation Manual - Lumishore LUX Flood Light 4" Installation Guide (EN)

Avis de l'expert

« Integration and versatility of the CRGBW Lumishore LUX 4" flood light (Garmin) »

The Lumishore LUX Flood Light 4" (distributed by Garmin) is a marine lighting solution specifically designed for boat owners seeking versatile lighting and advanced system integration. Unlike standard white-only utility lights, its CRGBW capability allows for creating varied ambiances on the deck or cockpit, or providing effective safety lighting with specific colors. Its 1050-lumen output and wide oval beam are suited for covering extended areas without hotspots.

From an installation perspective, this floodlight offers two options: bracket mounting or recessed installation. Bracket mounting is relatively straightforward, requiring a hole for the supplied M6 bolt and a 6 mm cable pass-through, with the recommendation to use a gland to ensure watertightness. Recessed installation is more demanding, requiring precise cutting using a template and application of marine-grade sealant. It is critical to respect the 5 Nm torque to avoid damaging the fixture.

It is important to note that this floodlight is not a standalone solution. It requires a mandatory connection to a Lumishore LUX Light module, and its wiring must comply with ABYC standards, including appropriate fusing for each circuit. This dependence on the LUX module is a key differentiator: it enables the LUX Flood Light 4" to integrate into a connected lighting ecosystem, offering advanced control features via Garmin MFDs or smart devices, far exceeding the capabilities of a standard floodlight. This product is therefore ideal for new installations or refits where a consistent, controllable lighting system is planned, rather than a simple addition of lights.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX, LED reflektor 4 palce (10 cm)

5.730,42 CZK

5.730,42 CZK ~~6.234,46 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the luminous intensity of the GARMIN LUX Flood Light 4" spotlight?

The GARMIN LUX Flood Light 4" floodlight delivers a luminous output of 1050 lumens.

What are the available lighting colors for this floodlight?

This spotlight is a CRGBW model, meaning it can emit cold colors, red, green, blue, and warm white. It thus offers a full range of colors for illumination.

What is the required supply voltage for the LUX Flood Light 4" spotlight?

The spotlight operates on a direct current (DC) voltage between 10.5 and 31 volts (10.5-31 VDC).

What is the maximum power consumption of this spotlight?

The maximum current draw of the spotlight is 1.7 A at 12 V, with an average power consumption of 22 W.

What is the water and dust resistance rating of the GARMIN LUX Flood Light 4"?

The spotlight is IP68 certified, ensuring complete protection against dust and prolonged immersion in water, making it ideal for marine environments.

What is the beam angle of the spotlight?

The spotlight features an ultra-wide oval beam of 70 to 90 degrees, optimized by custom diffusion optics for complete and uniform coverage.

Which materials are used for the construction of the spotlight?

The spotlight is built from marine-grade powder-coated aluminum, paired with a frosted lens, ensuring robustness and durability in a marine environment.

Is this spotlight available in different color finishes?

Yes, the LUX Flood Light model is available in white or black finishes to suit various boat configurations.

Who should install the GARMIN LUX Flood Light 4" spotlight?

Installation, inspection, and maintenance of this product must be performed only by a qualified electrician, in accordance with all applicable electrical codes.

What safety precautions must be taken before installation?

It is imperative to ensure that the power supply is TURNED OFF before and during any installation or maintenance.

How to install the spotlight using the bracket mount?

Select a flat and durable mounting location.Drill a 6.5 mm hole for the provided M6 bolt and a 6 mm hole for the cable.Fasten the bracket using the provided M6 bolt and nylon insert nut, applying the appropriate torque.Install the light on the bracket using the provided M6 bolt, washers, and nylon insert nut, tightening to 5 Nm torque without exceeding.Ensure the cable entry is watertight; using a cable gland is recommended.

How to install the flush-mount spotlight?

Select a flat and durable location, free of obstructions behind it. Use the provided template (45-0216) to drill a small pilot hole, then 10 mm holes in each corner before cutting the sides. It is recommended to cut slightly undersized and adjust with a file. Mount the spotlight with high-quality marine sealant (e.g., 3M 4200) and secure it with appropriate screws, without exceeding 5 Nm of torque. Immediately clean any excess sealant with a soft cloth and soapy water.

Does the underwater light wiring require a specific control module?

Yes, the Lumishore LUX Flood Light 4" must be connected to the Lumishore LUX Light module. Each lighting circuit must be fused accordingly.

What are the color codes for the projector cables?

Wires are color-coded as follows: RED for power (PWR), BLACK for ground (GND), and YELLOW for data (DATA).

How to clean and maintain the LUX Flood Light 4" spotlight?

Use only water and mild soap with a soft cloth to clean the projector. Do NOT use chemical cleaners or high-pressure washers. Regular inspection is recommended.

Can the spotlight be controlled by a multifunction display (MFD)?

Yes, the spotlight can be controlled via a multifunction display (MFD) if it is connected to the Lumishore LUX Light module and, optionally, to the EOS-LUX control center.

How many Lumishore LUX Light floodlights can be connected to a single module?

A single Lumishore LUX Light module can support up to 5 lights. To connect more than 5 lights (up to a maximum of 16), additional LUX Light modules are required.

Is the spotlight compatible with the EOS-LUX control unit?

Yes, the spotlight is designed to be compatible with the EOS-LUX control center via the Lumishore LUX Light module.

What is the warranty duration for the Lumishore LUX Flood Light 4" spotlight?

The spotlight comes with a three-year warranty from the original purchase date, covering manufacturing and material defects.

Which situations can void the projector's warranty?

The warranty will be void in case of misuse, abuse, incorrect installation, negligence, damage caused by disasters (fire, flood, lightning), installation by unqualified personnel, unauthorized repair or modification, or failure to comply with installation, maintenance, and usage guidelines.