LUX SL180, Strip Light, CRGBW, 4700mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 12%

Garmin

010-04405-00

LUX SL180, LED pás, CRGBW, 4700 mm

Conçue pour l'éclairage marin, la bande lumineuse Garmin LUX SL180 CRGBW de 4,7 mètres offre un spectre complet de couleurs et un blanc tunable (2700K-6500K). Avec 180 LEDs par mètre et une certification IP68, elle est découpable tous les 100 mm pour une intégration précise dans la gamme LUX de Lumishore/Garmin. Ce kit inclut la bande lumineuse de 4700mm, son adhésif 3M, et des clips de fixation à visser.

Prix publicBénéficier du tarif pro

6.999,92 CZK

6.999,92 CZK ~~7.980,06 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ výrobku	Bande lumineuse
Provozní napětí	23-25 V
Typická spotřeba elektrické energie	23.5 W
Barva světla	CRGBW (blanc froid, rouge, vert, bleu, blanc chaud)
Stupeň krytí IP	IP68
Kompatibilní s stmíváním	Oui
Délka pásku	4.7
Hustota LED / metr	180.0
Lepící podklad	Oui
Typ lepidla	3M
Bend Axis	Vertical uniquement
Compatible Driver	Module driver Lumishore LUX Strip Light
Direct Sunlight Exposure	Non recommandé
Driver Required	Oui
Min Bend Radius Vertical	50
Spotřeba elektrické energie na metr	5 W/m
Submersible	Non
Odolnost vůči UV	Oui
Wet Area Installation	Oui

Description détaillée

Pás Garmin LUX SL180 CRGBW o délce 4700 mm je navržen pro pokročilé osvětlení na palubě a integruje se do systémů Lumishore LUX pro personalizované námořní osvětlení. Tento svítidlo kombinuje úplné spektrum barev (červená, zelená, modrá) se dvěma teplotami bílého světla (studená a teplá), což umožňuje přesné nastavení atmosféry od 2700K do 6500K.

Technické specifikace a integrace

Pás LUX SL180 obsahuje 180 LED na metr, což zaručuje konstantní a rovnoměrné osvětlení. Délka 4700 mm je řezatelná po 100 mm, čímž umožňuje přesné přizpůsobení různým umístěním. Každý řezaný úsek musí být utěsněn dodaným kitem, aby byla zachována jeho vodotěsnost. Svítidlo je certifikováno stupněm krytí IP68, což zajišťuje ochranu proti prachu a dočasnému ponoření, a je tak vhodné pro instalace uvnitř i vně lodi nad čárou ponoru. Napájení probíhá prostřednictvím speciálního modulu driveru Lumishore LUX Strip Light s vstupním napětím 23 až 25 V pro samotný pás a průměrnou spotřebou 8,7 W/m.

Instalace a ovládání

Instalace pásu LUX SL180 je usnadněna diskrétním designem a předem aplikovaným lepidlem 3M. Součástí balení jsou také šroubovací montážní spony pro venkovní instalace, do vlhkých oblastí nebo při ostrých ohybech. Je nezbytné dodržet minimální poloměr ohybu 50 mm ve vertikální ose a vyhnout se horizontálnímu ohybu či kroucení. Ovládání osvětlení lze provádět prostřednictvím kompatibilního multifunkčního displeje Garmin, displeje Lumishore, chytrého zařízení (vyžaduje EOS-LUX Command Center) nebo okamžitého spínače (vyžaduje Strip Driver). Standardní funkcí je stmívání pro úpravu intenzity světla. Materiál odolný vůči UV a plné zapouzdření zaručují dlouhou životnost v námořním prostředí, podpořenou 3letou zárukou.

Documentations

Type	Nom
	Installation Guide - LUX SL90 & SL180 IP68 LED Strip Light Installation Guide

Avis de l'expert

Pol CONIN

Digitální manažer

« Technical evaluation: Garmin LUX SL180 marine RGBW LED strip light »

The Garmin LUX SL180 CRGBW light strip is a versatile supplementary lighting solution for marine applications above the waterline. Its main advantage lies in its customization capability, offering full CRGBW lighting with tunable white from 2700K to 6500K. This allows users to create varied ambiences, from functional white for tasks to red for night vision, which is difficult to achieve with more traditional fixed fixtures.

In terms of installation, the flexibility provided by cuts every 100 mm is a major asset for custom integrations in complex spaces such as cockpit ceilings, side decks, or protected interiors. It is imperative to use the dedicated Lumishore LUX Strip Light driver module to ensure proper operation and warranty validity. Integration into a Garmin/Lumishore ecosystem via the EOS-LUX Command Center unlocks advanced control features from an MFD or mobile device, transforming a simple light source into a dynamic element of the boat's system. It is crucial to respect the 50 mm vertical bend radius and avoid any twisting to prevent structural damage.

This product serves as a complement to primary zone lighting, providing a subtle aesthetic or functional touch where spotlights or ceiling fixtures would be too bulky. It is not designed for permanent submersion, despite its IP68 rating, and should not be considered a replacement for underwater lighting. It is a relevant choice for owners seeking a discreet, highly customizable accent lighting solution integrated into their existing navigation system.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, LED pás, CRGBW, 4700 mm

6.999,92 CZK

6.999,92 CZK ~~7.980,06 CZK~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 – 10" zobrazovací jednotka s mapovou sadou světa

Ref : 010-02091-00

55.794,36 CZK

55.794,36 CZK ~~73.293,55 CZK~~

Garmin

GPSMAP® 8416xsv - kombinovaný GPS-sonar 16"

Ref : 010-02093-02

131.002,41 CZK

131.002,41 CZK ~~170.302,69 CZK~~

Garmin

Multifunkční zobrazovač GMI 20 - 4"

Ref : 010-01140-00

11.821,69 CZK

11.821,69 CZK ~~14.938,18 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Garmin LUX SL180 CRGBW light bar?

The Garmin LUX SL180 LED strip is a 4700 mm long marine light fixture designed to provide flexible and customizable lighting aboard. It integrates with the Lumishore LUX systems and offers a full spectrum of colors (red, green, blue) as well as two white temperatures (cool and warm).

What colors are available and what are the white temperature options for this LED strip?

The LUX SL180 LED strip is of the CRGBW type, meaning it can display colors (red, green, blue) and two white temperatures. The white temperatures are adjustable from 2700K (warm white) to 6500K (cold white), allowing precise customization of the lighting ambiance.

What is the length of the Garmin LUX SL180 LED light strip?

The Garmin LUX SL180 light strip has a total length of 4700 mm.

How many LEDs are there per meter on this LED strip?

The LUX SL180 LED strip is equipped with 180 LEDs per meter, providing consistent and uniform brightness along its length.

Is the LUX SL180 light strip waterproof? What is its IP rating?

Yes, the LUX SL180 LED strip is fully sealed and IP68 certified. This means it is protected against dust and temporary immersion in water. It is suitable for indoor and outdoor marine installations but must be placed above the waterline.

Can the Garmin LUX SL180 LED strip be permanently installed underwater?

No, although the LUX SL180 light strip is IP68 certified and can be installed in wet areas, it is not designed to be permanently submerged in water. It must be installed above the waterline.

How is the mechanical installation of the light strip carried out?

Installation is facilitated by a pre-applied 3M adhesive. It is recommended to thoroughly clean the mounting surface with IPA to ensure it is free of dust and dirt. After removing the adhesive's protective layer, press the strip firmly into place by applying pressure only to the edges, without pressing on the LEDs. Allow the adhesive to cure for 24 hours before turning on the strip.

Are additional fastenings required for installing the LED strip?

For outdoor installations in wet areas or with tight bend radii, it is recommended to use mechanical fasteners (mounting clips) in addition to adhesive. These clips should be placed every 25 to 30 cm and/or on each side of a bend.

Can the LED light strip be cut to a shorter length?

No, the LED strip is supplied in pre-fabricated, factory-sealed lengths to meet IP68 standards. It is imperative not to cut the LED strip, as this would void its IP68 waterproofing and the warranty.

What is the flexibility of the light strip? Can it be bent or twisted?

The LED strip has a minimum bending radius of 50 mm, but only along the vertical axis. It is critical not to bend it along the horizontal axis or twist it, as this could damage it and void the warranty.

Are there any precautions to take when handling the LED strip?

Unroll it carefully from the spool and do not let it drop or twist. Do not apply pressure on the tape at the LED level; press only on the edges. Do not pull, stretch, twist, or bend the tape on the horizontal axis. For lengths over 1 meter, always use two people for installation: one to install it and the other to hold and unroll the tape. Always lay the tape flat in a straight line; do not let it bend, twist, or bunch up.

Can the LED light strip be installed in areas with strong direct sunlight exposure?

The LED strip is made from UV-resistant material, but it must not be installed in areas exposed to strong direct sunlight. Choose a location where it will not be directly exposed to intense sunlight.

What type of driver module is required to operate this LED strip?

The LUX SL180 light strip is designed to be used exclusively with a dedicated Lumishore LUX Strip Light driver module. It must not be connected to other lighting control products or third-party drivers.

Can I use a driver from another brand with the LUX SL180 LED strip?

No, the LUX SL180 LED strip must be used exclusively with Lumishore LUX Strip Light driver modules. Using third-party drivers will void the product warranty.

What is the required input voltage range for the LUX SL180 LED strip?

The LUX SL180 light strip requires an input voltage range of 23 to 25V. This voltage is provided by the dedicated Lumishore LUX Strip Light driver module.

Is the Lumishore LUX Strip Light driver module included with the light strip?

No, the LUX SL180 LED strip is a component that requires a dedicated Lumishore LUX Strip Light driver module to operate. The driver module is a separate item and is not included with the LED strip itself.

What is the warranty duration for the LUX SL180 LED light strip?

The LUX SL180 LED light bar comes with a three-year warranty from the original purchase date, covering manufacturing defects.

What conditions could void the warranty for the LED strip?

The warranty may be voided in case of misuse, abuse, incorrect installation, negligence, damage caused by disasters (fire, flood, lightning), installation by unqualified personnel, unauthorized repair or modification, or unapproved installations. Failure to comply with the installation, maintenance, and usage guidelines specified in the manual, including the use of third-party drivers or cutting the strip, will also void the warranty.

Is the LUX SL180 LED light bar compatible with other marine lighting systems?

The LUX SL180 LED strip is specifically designed to integrate with Lumishore LUX systems. It must be used with the dedicated Lumishore LUX Strip Light driver module and is not compatible with other third-party systems or drivers.