LUX SL180, Strip Light, CRGBW, 2700mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 10%

Garmin

010-04388-00

LUX SL180, LED pás, CRGBW, 2700 mm

La bande lumineuse Garmin LUX SL180 CRGBW de 2700 mm offre un éclairage marin à spectre complet avec blanc tunable de 2700 K à 6500 K. Certifiée IP68 et résistante aux UV, elle s'intègre dans l'écosystème Lumishore LUX et est contrôlable via MFD compatibles (nécessite le centre de commande EOS-LUX). La bande est livrée avec un support adhésif 3M et des clips de fixation à visser.

Prix publicBénéficier du tarif pro

5.142,10 CZK

5.142,10 CZK ~~5.724,93 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ výrobku	Bande lumineuse
Provozní napětí	23-25 V
Typická spotřeba elektrické energie	13.5 W
Barva světla	CRGBW (blanc froid, rouge, vert, bleu, blanc chaud)
Stupeň krytí IP	IP68
Kompatibilní s stmíváním	Oui
Délka pásku	2.7
Hustota LED / metr	180.0
Lepící podklad	Oui
Bend Axis Restriction	Vertical uniquement
Compatible Driver Module	Modules de pilote de bande lumineuse Lumishore LUX
Cuttable	Non
Fastener Spacing	25-30 cm
Prostředí instalace	Intérieur, Extérieur, Zones humides
Minimum Bend Radius	50
Mounting Clip Material	Acier inoxydable
Spotřeba elektrické energie na metr	5 W/m
Warranty Duration	3 ans

Description détaillée

Pásová LED LUX SL180 CRGBW od Garmin o délce 2700 mm je určena pro námořní osvětlení a nabízí řešení s plným spektrem světla s možností nastavení barvy. Obsahuje LED CRGBW (studený bílý, červený, zelený, modrý, teplý bílý) a umožňuje nastavení teploty bílé barvy v rozmezí od 2700 K do 6500 K. Tato flexibilita umožňuje vytvářet různé atmosféry na palubě.

Integrace a technické parametry

Pásová LED LUX SL180 je navržena pro spolupráci s řídicími moduly Lumishore LUX, čímž zajišťuje optimální kompatibilitu a výkon. Napájení probíhá v rozsahu napětí 10,5–31 VDC prostřednictvím řídicího modulu LUX, přičemž průměrná spotřeba činí 8,7 W/m. Produkt je zcela zalitý a vybavený difuzorem bez viditelných bodů, což zaručuje homogenní rozptyl světla. Díky krytí IP68 je vhodný pro instalace ve vnitřních i venkovních prostorách, včetně vlhkých oblastí, není však určen pro trvalé ponoření.

Instalace a námořní odolnost

Instalace LUX SL180 je usnadněna pomocí lepicí pásky 3M. Pro venkovní instalace, vlhké prostředí nebo ostré ohyby se doporučuje použití šroubovacích upevňovacích svorek v rozestupech 25–30 cm. K dispozici jsou také volitelné kovové svorky z nerezové oceli pro úzké montážní kanály. Pásová LED je vyrobena z materiálu odolného vůči UV záření a byla testována v solné mlze. Má minimální poloměr ohybu 50 mm ve vertikální ose, přičemž je nutné se vyvarovat ohýbání v horizontální ose nebo kroucení. Pás je dodáván v předem připravených délkách a továrně zalitých, aby splňoval normy IP68. Ačkoliv instalační příručka uvádí, že pás nelze stříhat, další informace specifikují, že jej lze stříhat po 100 mm, pokud se použije těsnicí sada s lepidlem na bázi silikonu a koncovkami, která je součástí dodávky a zajišťuje udržení těsnosti po řezu. Záruka na výrobek činí tři roky.

Documentations

Type	Nom
	Installation Guide - Installation Guide for LUX SL90 & SL180 IP68 LED Strip Lights

Avis de l'expert

Pol CONIN

Digitální manažer

« Garmin LUX SL180 marine ambient lighting: CRGBW integration and flexibility »

The Garmin LUX SL180 CRGBW light strip is a flexible and high-performance supplementary lighting solution for the interiors and exteriors of vessels. Its main advantage lies in its ability to provide full-spectrum CRGBW lighting with tunable white (2700 K to 6500 K), enabling advanced customization of the onboard lighting ambiance. This versatility sets it apart from standard monochrome or simple RGB LED lights. It is particularly well-suited for decorative or discreet functional applications, such as lighting walkways, steps, lockers, or under-counter spaces on mid-sized to large sailboats and motor yachts. Its low profile and UV resistance make it a relevant choice for exposed areas.

Regarding installation, it is critical to note that the LUX SL180 must be connected to Lumishore LUX light strip driver modules to operate and to validate the warranty. This means it is not a standalone "plug-and-play" solution compatible with any controller but integrates into an existing or to-be-built Lumishore ecosystem. The 10.5–31 VDC input voltage is specific to these drivers. Respecting the minimum 50 mm bending radius on the vertical axis is essential to avoid damaging the strip. The original installation guide advises against cutting the strip, as it is supplied in factory-sealed pre-cut lengths to meet IP68 standards. Cutting the strip would void the warranty and compromise the IP68 rating for this specific model.

Compared to more generic marine lighting solutions, the LUX SL180 stands out for its deep integration into the Lumishore/Garmin ecosystem, offering advanced control options via compatible MFDs, Lumishore displays, or smart devices (requiring the EOS-LUX control hub). This ensures a consistent and centralized user experience. Its primary limitations stem from this dependency on the Lumishore ecosystem, which can result in a higher upfront cost for a complete installation if the infrastructure is not already in place. It is not designed for intense primary lighting but excels at adding customizable aesthetic and functional touches.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, LED pás, CRGBW, 2700 mm

5.142,10 CZK

5.142,10 CZK ~~5.724,93 CZK~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 – 10" zobrazovací jednotka s mapovou sadou světa

Ref : 010-02091-00

55.690,41 CZK

55.690,41 CZK ~~73.157,00 CZK~~

Garmin

GPSMAP® 8416xsv - kombinovaný GPS-sonar 16"

Ref : 010-02093-02

130.758,35 CZK

130.758,35 CZK ~~169.985,41 CZK~~

Garmin

TD 50, 5" dotykový displej

Ref : 010-02139-10

12.626,15 CZK

12.626,15 CZK ~~17.150,61 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of the Garmin LUX SL180 light strip?

The Garmin LUX SL180 light strip has a length of 2700 mm.

What colors can this LED strip produce?

The LUX SL180 light strip is equipped with CRGBW LEDs, meaning it can produce cold white, red, green, blue, and warm white colors. It provides full-spectrum lighting.

Is the LUX SL180 light bar waterproof?

Yes, the LUX SL180 light strip is fully sealed and has an IP68 protection rating. This means it is suitable for indoor and outdoor installations, including wet areas, but it is not designed for continuous immersion in water.

Is it possible to adjust the color temperature of the white?

Yes, the LUX SL180 LED light strip allows adjustment of the white color temperature from 2700 K (warm white) to 6500 K (cool white), providing high flexibility to create different lighting moods.

Are the individual LED points visible on this LED strip?

No, the LUX SL180 LED strip has a diffuser with no visible points, ensuring homogeneous and continuous light diffusion.

Can the LUX SL180 LED strip be installed outdoors?

Yes, the LUX SL180 LED light strip is designed for outdoor installation thanks to its IP68 protection rating and UV-resistant material. However, it is recommended not to install it in areas exposed to strong direct sunlight.

What is the input voltage range for this LED strip?

The LUX SL180 light strip requires an input voltage of 23 to 25 V to operate. This power supply is managed by the Lumishore LUX light strip driver module, which itself can accept a voltage range of 10.5 to 31 VDC from the vessel's power source.

Is the material of the light strip UV-resistant?

Yes, the LUX SL180 light strip is made from UV-resistant material.

How to install the LUX SL180 LED strip?

Installation of the LUX SL180 LED strip is made easier by a pre-applied 3M adhesive backing. For outdoor installations, wet areas, or tight bends, it is recommended to use mechanical mounting clips in addition to the adhesive.

Is it possible to cut the light strip to shorten it?

No, the LUX SL180 LED strip is supplied in predefined, factory-sealed lengths to meet IP68 standards. It is imperative not to cut the LED strip, as this would void the warranty and compromise its waterproofing.

What is the minimum bending radius for the LED strip?

The LUX SL180 light strip has a minimum bending radius of 50 mm on the vertical axis only. Do not bend it on the horizontal axis or twist it.

Are there specific recommendations for outdoor installation or in wet areas?

For outdoor installations in damp areas or with tight bend radii, it is strongly recommended to use mechanical fastenings (clips) in addition to the 3M adhesive layer to ensure optimal and durable hold. These fastenings should be placed every 25 to 30 cm and/or on each side of a bend.

What precautions should be taken before starting the electrical installation?

Before any installation, always ensure that the ship's power source and the battery are disconnected or isolated. It is also recommended that a qualified professional performs the electrical and mechanical installation.

Should pressure be applied to LEDs during installation?

No, during installation, do not apply pressure to the LED area. Press only the edges of the light strip to secure it in place.

How long should you wait after installation before turning on the light strip?

It is recommended to let the 3M adhesive cure for 24 hours after installation before turning on the LED strip, to ensure optimal and durable adhesion.

Are mounting clips necessary and how to use them?

Mounting clips are optional but recommended for outdoor installations, wet areas, or tight bend radii. They can be used in addition to 3M adhesive. For narrow mounting channels, stainless steel metal clips may be provided. To install them, gently open the clips, insert the light strip, then gently tighten them around the strip.

Can I bend the light strip horizontally or twist it?

No, the LED strip must be bent only along the vertical axis, with a minimum radius of 50 mm. It is imperative not to bend it along the horizontal axis or twist it, as this could damage the product and void the warranty.

What equipment is required to operate the LUX SL180 LED light strip?

The LUX SL180 LED strip is specifically designed to work with Lumishore LUX LED strip modules. It requires connection to these modules for optimal performance and compatibility.

Is the LUX SL180 light bar compatible with third-party lighting control systems?

No, the LUX SL180 light strip is designed to be used only with Lumishore LUX light strip modules. Connection to other third-party lighting products or autopilot controllers is not supported and will void the warranty.