LUX SL180, Strip Light, CRGBW, 1500mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 10%

Garmin

010-04376-00

LUX SL180, LED pásové osvětlení, CRGBW, 1500 mm

La bande lumineuse Garmin LUX SL180 CRGBW de 1500 mm offre un éclairage marin à spectre complet, avec des couleurs et un blanc tunable de 2700K à 6500K. Étanche IP68 et non-découpable, elle s'intègre discrètement et se contrôle via les systèmes Garmin compatibles, nécessitant un module pilote Lumishore LUX. Ce produit est livré avec des clips de fixation à visser pour une installation personnalisée.

Prix publicBénéficier du tarif pro

2.682,63 CZK

2.682,63 CZK ~~2.986,76 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ výrobku	Bande lumineuse LED
Provozní napětí	23-25
Typická spotřeba elektrické energie	7.5
Barva světla	CRGBW (Blanc froid, Rouge, Vert, Bleu, Blanc chaud)
Stupeň krytí IP	IP68
Kompatibilní s stmíváním	Oui
Délka pásku	1.5
Hustota LED / metr	180.0
Lepící podklad	Oui
Bending Restriction	Ne pas plier sur l'axe horizontal ni tordre
Cuttable	Non
Driver Required	Oui
Materiál	Polymère résistant aux UV
Min Bend Radius Vertical	50
Mounting Clips Included	Oui
Typ montáže	Adhésif 3M, Clips à visser
Spotřeba elektrické energie na metr	5
Salt Fog Tested	Oui
Odolnost vůči UV	Oui

Description détaillée

Garmin LUX SL180 je ohebné LED pásové osvětlení CRGBW o délce 1500 mm určené pro námořní použití. Poskytuje osvětlení s plným spektrem, včetně studeného bílého, červeného, zeleného, modrého a teplého bílého světla, s nastavitelnou barevnou teplotou bílého světla od 2700 K do 6500 K.

Všestrannost a instalace

Díky krytí IP68 je LUX SL180 vhodný pro instalace uvnitř i venku nad čárou ponoru, odolný proti prachu a dočasnému ponoření. LED pás je dodáván v předem stanovených délkách a továrně uzavřený pro splnění norem IP68. Nesmí se stříhat. Instalace je usnadněna pomocí 3M lepicí podložky a šroubovacích fixačních spon. Pás má minimální poloměr ohybu 50 mm na vertikální ose, ale nesmí se ohýbat ani kroutit na horizontální ose. Je rovněž odolný proti UV záření a testován v solné mlze.

Integrace a ovládání

LUX SL180 vyžaduje pro provoz modul LED pásového osvětlení Lumishore LUX LED. Jeden modul podporuje až 10 metrů LED pásu. Integruje se do kompatibilních systémů Garmin, umožňujících ovládání prostřednictvím multifunkčního displeje (MFD), displeje Lumishore, chytrého zařízení (přes řídicí centrum EOS-LUX) nebo okamžitého spínače (přes modul pásu). Jmenovitý příkon je 5 W na metr, s napájecím napětím 23–25 V přes modul. Ve srovnání se základními námořními RGBW osvětlovacími řešeními nabízí LUX SL180 plnou CRGBW funkci, laditelný bílý světelný odstín a flexibilitu přizpůsobení, čímž představuje pokročilé řešení pro osvětlení interiéru a exteriéru na rekreačních a cestovních plavidlech.

Documentations

Type	Nom
	Installation Guide - LUX SL90 & SL180 IP68 LED Strip Lights

Avis de l'expert

Pol CONIN

Digitální manažer

« Garmin Marine Lighting LUX SL180: CRGBW Flexibility and Performance »

The Garmin LUX SL180 LED strip, part of the Lumishore LUX range, is a relevant option for ambient and functional lighting aboard vessels. Its CRGBW capability (cool white, red, green, blue, warm white) provides an extended palette for customizing the atmosphere, from neutral white working light to colored ambiances. The inclusion of warm white is a significant advantage, allowing for more comfortable atmospheres compared to standard RGBW solutions. This product is particularly suited to mid-sized sailboats and powerboats where installation flexibility and color management are sought for cockpit areas, cabins, or side decks.

From an installation standpoint, the LED strip is supplied in predefined lengths and factory-sealed to meet IP68 standards. It is critical to respect the minimum bending radius of 50 mm on the vertical axis. The strip must not be cut. For lengths exceeding one meter, two people are recommended to avoid twisting or improper bending. The SL180 must be paired with the Lumishore LUX Strip Light Driver module, as any connection to another driver voids the warranty and may compromise operation. This driver module also manages integration with compatible Garmin multifunction displays or Lumishore controls, offering centralized control for the user. However, the LUX SL180 is not designed for permanent submersion; it must be installed above the waterline.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, LED pásové osvětlení, CRGBW, 1500 mm

2.682,63 CZK

2.682,63 CZK ~~2.986,76 CZK~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 – 10" zobrazovací jednotka s mapovou sadou světa

Ref : 010-02091-00

55.690,41 CZK

55.690,41 CZK ~~73.157,00 CZK~~

Garmin

GPSMAP® 8416xsv - kombinovaný GPS-sonar 16"

Ref : 010-02093-02

130.758,35 CZK

130.758,35 CZK ~~169.985,41 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of the Garmin LUX SL180 light bar?

The Garmin LUX SL180 light bar has a length of 1500 mm.

What lighting colors are available with the LUX SL180 LED strip?

The LUX SL180 light strip provides CRGBW lighting, which includes:

Cold whiteRedGreenBlueWarm white

Is the LUX SL180 light strip waterproof?

Yes, the LUX SL180 LED strip has an IP68 protection rating. This means it is dustproof and can withstand temporary immersion in water. It is designed for indoor and outdoor installations above the waterline but is not intended for permanent submersion.

Can the color temperature of the white light be adjusted on this LED strip?

Yes, the color temperature of the white light is adjustable on the LUX SL180 LED strip, ranging from 2700K (warm white) to 6500K (cool white).

How many LEDs per meter does the LUX SL180 LED strip contain?

The LUX SL180 LED strip is equipped with 180 LEDs per meter, providing dense and uniform light diffusion.

Is the light strip UV-resistant and salt spray resistant?

Yes, the LUX SL180 LED strip is made from UV-resistant material and has been tested for salt spray resistance, making it suitable for marine environments.

What is the power consumption of the LUX SL180 LED strip?

The power consumption of the LUX SL180 LED strip is 5 watts per meter. For a 1500 mm (1.5 meter) strip, the total consumption is therefore 7.5 watts.

Is it possible to cut the Garmin LUX SL180 light strip to fit a specific length?

No, the LUX SL180 LED strip is supplied in predefined lengths and factory-sealed to meet IP68 standards. It must not be cut, as this would void its waterproofing and warranty.

How is the LUX SL180 LED strip mounted?

Installation of the LUX SL180 LED strip is facilitated by several methods:

A 3M adhesive backing is included for initial attachment. Screw-mounted fixing clips are also included and are recommended for outdoor installations, wet areas, or tight bend radii.

What is the minimum bend radius for the LED strip?

The LUX SL180 light strip has a minimum bending radius of 50 mm on the vertical axis. It is important not to bend or twist it on the horizontal axis to avoid damaging the product.

What precautions should be taken when handling and installing the LED light strip?

During installation, it is recommended to:

Unroll the LED strip carefully from the reel. Do not apply pressure to the LED area, only to the edges of the strip. Do not pull, stretch, twist, or bend the strip on the horizontal axis. Use two people to install lengths over one meter. Lay the strip flat in a straight line without allowing it to bend, twist, or bunch up.

How to prepare the surface before sticking the LED strip?

Before applying the LED strip, the mounting surface must be thoroughly cleaned using isopropyl alcohol (IPA) to ensure it is free of dust and dirt.

How long should you wait after installation before turning on the LED strip?

It is recommended to let the adhesive cure for 24 hours after installation before turning on the light strip.

Are additional mounting clips available for narrow channels?

Yes, Lumishore can supply stainless steel clips for narrow mounting channels. These clips are secured with a countersunk screw.

What equipment is required to operate the LUX SL180 light strip?

The LUX SL180 light strip requires a Lumishore LUX LED light strip driver module to operate. This driver module supports up to 10 meters of light strips.

Is the LUX SL180 light bar compatible with other lighting control systems besides Garmin?

No, the LUX SL180 LED strip is designed for exclusive use with Lumishore LUX LED light modules and integrates with compatible Garmin control systems. Connection to third-party lighting products or controllers is not supported and will void the warranty.

What is the required input voltage range for the LUX SL180 LED strip?

The LUX SL180 light bar requires an input voltage range of 23 to 25V. It must only be used with Lumishore light bar driver modules.

What is the warranty duration for the Garmin LUX SL180 LED strip?

Lumishore Ltd guarantees its lighting systems and associated lights and accessories against manufacturing defects for a period of three years from the original purchase date.

Which situations can void the warranty of the LUX SL180 LED strip?

The warranty may be voided in the following cases:

Improper use or abuse. Incorrect installation or by unqualified personnel. Negligence or improper shipping. Damage caused by disasters (fire, flood, storm, lightning). Unauthorized repair or modification. Unapproved installations or non-compliance with installation, maintenance, and usage guidelines. Use with third-party drivers other than Lumishore LUX light strip driver modules.

Does using a non-Lumishore lighting pilot affect the warranty?

Yes, using the LUX SL180 light strip with third-party autopilot modules other than the Lumishore LUX light strip control module will void the warranty. The strip is specifically designed to operate only with the Lumishore control module.