LUX SNL180, Superbright Neon Flex Strip Light, 2200mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 12%

Garmin

010-04429-00

LUX SNL180, neonový flex pásek Superbright, 2200 mm

La bande lumineuse néon flex Garmin LUX SNL180 de 2200mm est une solution d'éclairage marin Superbright avec 180 LEDs/m, offrant un spectre CRGBW complet et un blanc tunable de 2700K à 6500K. Certifiée IP67 et résistante aux UV et au brouillard salin, elle assure une illumination homogène sans points visibles. Elle est conçue pour fonctionner exclusivement avec un module de pilote Lumishore LUX dédié et s'installe via les clips en acier inoxydable fournis.

Prix publicBénéficier du tarif pro

4.366,71 CZK

4.366,71 CZK ~~4.978,18 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ výrobku	Bande lumineuse flexible
Provozní napětí	10.5 à 31 VDC
Typická spotřeba elektrické energie	19.14 W
Barva světla	CRGBW (blanc froid, rouge, vert, bleu, blanc chaud)
Stupeň krytí IP	IP67
Kompatibilní s stmíváním	Oui
Délka pásku	2.2
Hustota LED / metr	180.0
Construction Type	Entièrement encapsulée et potée
Direct Sunlight Exposure	Non
Prostředí instalace	Intérieur,Extérieur,Au-dessus de la ligne de flottaison
Installation Requirement	Installation par un professionnel qualifié
Max Current Consumption Per Meter 12v	0.6
Max Current Consumption Per Meter 24v	0.36
Max Strip Length Per Driver	10
Spotřeba elektrické energie na metr	8.7
Required Driver Module	Module de pilote de bande lumineuse LUX Lumishore
Odolnost vůči UV	Oui

Description détaillée

Páska určená pro osvětlení na moři, neonový flex pásek Garmin LUX SNL180 o délce 2200 mm představuje řešení osvětlení Superbright s pokročilými funkcemi. Obsahuje 180 LED/m, poskytuje plný barevný spektra CRGBW (studená bílá, červená, zelená, modrá, teplá bílá) s nastavitelnou teplotou bílé barvy od 2700K do 6500K, vše v jednom flexibilním pásku. Díky stupni krytí IP67 je vhodná pro instalace uvnitř i vně lodi nad čárou ponoru.

Technické parametry a integrace do systému

LUX SNL180 se vyznačuje osvětlením „bez bodů“ (dot-free), kterého je dosaženo difuzní vrstvou míchající světlo LED pro homogenní vzhled, na rozdíl od standardních LED pásků. Tato flexibilita umožňuje přizpůsobení zakřiveným povrchům, což usnadňuje instalaci pod palubní ochozy, stropy kabin nebo T-topy. Napájení je výhradně prostřednictvím specializovaného modulu pro ovládání LED pásků LUX, který podporuje napětí v rozmezí 10,5 až 31 VDC prostřednictvím ovládacího modulu LUX, s maximální spotřebou 0,6 A/m při 12 V a 0,36 A/m při 24 V. Průměrný příkon je 8,7 W/m. Každý ovládací modul zvládne řídit až 10 metrů pásku celkem. Konstrukce je zcela zalitá a utěsněná, zaručující odolnost vůči UV záření a slanému oparu.

Instalace a životnost

Instalace LUX SNL180 se provádí pomocí dodaných nerezových spon, upevněných šrouby. Páska se smí ohýbat pouze v bočním směru s minimálním poloměrem ohybu 120 mm a nesmí se ohýbat ve svislé ose ani kroutit. Délky jsou z výroby utěsněny podle norem IP67 a nesmí se stříhat. Tento pásek má tříletou záruku. Lze jej ovládat pomocí momentového spínače nebo integrovat do kompatibilních multifunkčních displejů (MFD) prostřednictvím řídicího centra EOS-LUX pro úplné ovládání CRGBW a přesné nastavení bílé barvy, což nabízí standardní možnosti stmívání.

Documentations

Type	Nom
	Installation Guide - LUX SNL180 2200mm Flexible Light Installation Guide

Avis de l'expert

« Technical analysis: Garmin LUX SNL180 neon flex light strip »

The Garmin LUX SNL180 is a marine lighting solution worth considering for boat owners seeking refined aesthetics and advanced functionality. Its main added value lies in its "dot-free" rendering, which provides a continuous, uniform light line—a clear visual advantage over classic LED strips where individual light points are often visible. This feature makes it particularly suitable for applications where lighting is directly exposed, such as under gunwales, handrails, or to highlight interior architectural contours.

Regarding installation, it is critical to note that the SNL180 requires the use of a dedicated Lumishore LUX driver module. This dependency limits flexibility when integrating with third-party lighting systems but ensures optimized power management and enhanced protection against voltage fluctuations, contributing to the product's longevity. The fact that the strip is supplied in fixed lengths and cannot be cut simplifies installation for standard lengths but requires precise planning of requirements. The minimum bending radius of 120mm and the prohibition against vertical-axis bending are mechanical constraints that must be carefully considered when designing the lighting layout. Using two people for lengths over 1 meter is a practical recommendation to avoid damaging the strip.

Although rated IP67 and resistant to UV and salt spray, it is essential to note that this product is not designed for permanent submersion. It is therefore ideal for damp areas exposed to spray but not for underwater use. Its ability to offer a full CRGBW spectrum with tunable white, combined with potential integration with MFDs via an EOS-LUX Command Center, provides lighting ambiance customization possibilities far beyond what many competing solutions offer. This product is thus suited for new installations or demanding renovations that can integrate the Lumishore/Garmin ecosystem for a consistent and high-performance user experience.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SNL180, neonový flex pásek Superbright, 2200 mm

4.366,71 CZK

4.366,71 CZK ~~4.978,18 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the length of the Garmin LUX SNL180 light bar?

The Garmin LUX SNL180 light strip measures 2200mm in length. It is important to note that it is supplied in pre-cut and factory-sealed lengths and must not be cut under any circumstances.

What color lighting options are available with this LED strip?

This LED strip provides a full CRGBW spectrum, including cool white, red, green, blue, and warm white. Additionally, the white color temperature is fully adjustable, ranging from 2700K to 6500K.

Is the LUX SNL180 LED light bar suitable for outdoor marine use?

Yes, the LED strip is designed with an IP67 protection rating, making it perfectly suitable for indoor and outdoor installations on a boat, specifically above the waterline. However, it is not designed for permanent immersion in water.

What is "dot-free" illumination and what is its advantage?

The "dot-free" illumination (no visible light points) means the LED strip delivers a perfectly uniform light output, with no individual LED points visible. This is achieved using a diffusion layer that blends the LED light, providing more uniform and aesthetic lighting than standard LED strips.

How many LEDs per meter does the LUX SNL180 LED strip contain?

The Garmin LUX SNL180 LED strip integrates 180 LEDs per meter, contributing to its Superbright illumination and uniform light output.

Is the light strip flexible to adapt to curved surfaces?

Yes, the LED strip is designed to be flexible and adapt to curved surfaces. It has a minimum bending radius of 120mm, but it is crucial to bend it only along the lateral axis and not twist or bend it along the vertical axis to avoid any damage.

Is the LED light strip UV-resistant?

Yes, the LED strip is made from UV-resistant material. However, to optimize its lifespan and performance, it is recommended not to install it in areas exposed to direct strong sunlight.

Can I cut the LUX SNL180 LED light strip to adjust its length?

No, it is essential not to cut the LUX SNL180 light strip. It is supplied in pre-fabricated lengths that are factory-sealed to ensure compliance with IP67 standards. Any cutting would invalidate these certifications as well as the product warranty.

How to install the LED strip on a surface?

The LED strip is installed using the supplied stainless steel clips. These clips must be screwed into place with appropriate screws. Once the clips are secured, the flexible neon strip is simply pushed into place until an audible 'click' confirms it is locked in. It is recommended to use multiple clips around tight curves to ensure proper conformity and prevent lifting.

Are there any precautions to take when folding the LED strip?

Yes, the LED strip can only be bent laterally, with a minimum bending radius of 120mm. It is critical not to bend it along the vertical axis or twist it, as this could damage the internal LEDs and void the warranty.

Should I disconnect the boat's power supply before installing the LED strip?

Yes, it is essential to always ensure that the vessel's power source and the battery are disconnected or isolated before proceeding with any electrical installation to guarantee your safety and that of the system.

Is it recommended to use a professional for installation?

Yes, it is strongly recommended that a qualified professional carry out the electrical and mechanical installation of the LED strip. This ensures correct, safe installation in compliance with technical specifications.

How to handle the light strip during installation to avoid damage?

To avoid damaging the tape, always unroll it carefully along its entire length and never let it drop or twist. For lengths over one meter, it is recommended to use two people: one to install it and another to hold and unroll the tape. Do not apply excessive pressure, pull, stretch, twist, or bend the tape on the vertical axis.

What equipment is required to power and control the LUX SNL180 LED strip?

The LUX SNL180 LED strip must be used exclusively with Lumishore’s dedicated LED strip controller modules. It is not compatible and must not be connected to other lighting control products or third-party controllers.

Can a single LUX autopilot module control multiple light bands?

Yes, each LUX autopilot module is designed to handle up to 10 meters of total light strip. If you need to install more than 10 meters, additional autopilot modules will be required.

Does using a pilot other than the recommended one affect the warranty?

Yes, using the LUX SNL180 light bar with third-party autopilots, other than Lumishore's dedicated light bar autopilot module, will void the product warranty.

What is the warranty duration for the Garmin LUX SNL180 LED strip?

Lumishore Ltd, the manufacturer, guarantees its lighting systems and associated accessories against manufacturing defects for a period of three years from the original purchase date.

Which actions can void the warranty on the LED strip?

The warranty may be voided in case of misuse or abuse, incorrect installation or negligence, damage caused by disasters (fire, flood, storm, lightning), installation by unqualified personnel, unauthorized repair or modification, non-compliance with all installation, maintenance, and use instructions specified in the manual. Using third-party, non-Lumishore-approved autopilots will also void the warranty.