Podpěra s přísavkou pro snímače Garmin GT montované na záďovém panelu

This suction mount is specifically designed to be compatible with Garmin fishfinders from the GT and CV series, which are typically mounted on the transom. It allows for temporary and flexible attachment of these transducers.

This mount is particularly suitable for lightweight boats and situations requiring temporary installation. It is ideal for canoes, kayaks, small inflatable boats, or for use on rental boats where hull drilling is not desirable.

To install the mount, ensure the stern transom surface is clean, smooth, and dry. Position the suction cup firmly against the surface and press to create adhesion. The mount can then be used to secure your GT or CV transducer.

Yes, the design of this transducer mount allows for adjustable angle. This flexibility is essential to optimize sonar returns, reduce noise, and ensure clear readings, adapting to water conditions and boat speed.

The suction mount is equipped with a robust suction cup designed to adhere firmly to smooth surfaces, even when the boat is in motion. It ensures the transducer remains secure for dynamic use, though it is always recommended to check adhesion regularly, especially at high speed.

The main advantage of this mount is its flexibility and non-invasive design. It allows for quick installation and removal of the transducer without the need to drill the hull. This is ideal for users who want to move their transducer between different boats or avoid permanent modifications to their vessel.

Yes, like most Garmin marine accessories, this mount is designed to withstand marine environments, including exposure to salt water. It is made from durable materials to ensure a long service life in these conditions.

Yes, to ensure optimal adhesion of the suction cup, it is strongly recommended to clean and dry the surface of the transom where the mount will be attached. A clean and smooth surface ensures better suction and more secure holding.

Yes, this suction mount (part number 010-11849-17) is a Garmin original accessory designed specifically for their GT and CV transducers.

To remove the mount, simply release the suction cup's pressure. Most robust suction cups have a small tab or lever that breaks the vacuum. Gently pull this tab to detach the suction cup from the surface without leaving marks or damage.

Yes, the product description clearly states that this suction mount is compatible with Garmin sounders from the GT and CV series, designed to be mounted on the transom.

Yes, as long as the mounting surface on the transom is smooth, clean, and non-porous, this suction cup mount can be used on aluminum or fiberglass hulls. The key is to have a flat surface for proper adhesion.

The Garmin suction cup mount (reference 010-11849-17) is a separately sold mounting accessory. The compatible transducer must be purchased separately.

The lifespan of a suction cup depends on its maintenance, frequency of use, and exposure to the elements. However, heavy-duty suction cups designed for the marine environment are built to last. Regular cleaning and proper storage will extend its lifespan.

No, this mount is specifically designed for Garmin transducers in the GT and CV series intended for transom mounting. Its design and adjustability are optimized for this configuration.

Yes, one of the main advantages of this mount is its portability. Thanks to its suction cup mounting system, it can be easily installed and removed, making it ideal for transferring between different boats without effort or tools.

While the suction cup is robust and designed to hold the transducer in motion, it is still advisable to monitor adhesion at high speeds. For very high speeds, a permanent mounting may be more appropriate. The mount is ideal for moderate fishing or cruising speeds.

To maintain optimal adhesion, regularly clean the suction cup with fresh water and mild soap to remove any salt, sand, or dirt residue. Ensure it is dry before storing. Avoid leaving it exposed to direct sunlight for extended periods when not in use to preserve its elasticity.

Yes, this mount is fully suitable for downrigging transducers, as it allows horizontal positioning of the transducer in the water and angle adjustment to optimize sonar return quality at trolling speeds.

No, one of the advantages of this mount is that it is non-invasive. Correctly installed and removed, it should leave no marks or damage on the smooth surface of your boat's transom, as it requires neither drilling nor permanent adhesive.