Podpěra pro stožár z uhlíkových vláken (4 jednotky)

This mount stands out with its carbon fiber construction for the side panels and anodized aluminum for the front panel. This material combination aims to balance lightness, rigidity, and resistance to marine environments.

This mount is specifically sized to hold four instrument displays. It provides a compact and optimized integration on the mast.

This mount is a dedicated mounting solution for Garmin GNX™ 120 instrument displays.

The weight of this mast mount, for the four-device model and excluding devices and cables, is 2.30 kg (5.1 lbs).

The industrial design of this mount is intended for a sleek aesthetic, blending discreetly with the mast fittings in a so-called "glass mast" style. It aims to combine lightness, rigidity, and resistance to marine environments.

No, the sun protection cover is not included with this mast mount. However, the mount is designed to allow the attachment of a sun protection cover (neoprene) via pressure fittings located at the top and bottom of the mount.

The part number for this Garmin mast mount is 010-12236-02.

This mount is compatible with masts ranging from 115 to 200 mm in diameter (4 to 8 inches).

No, this mount is specifically designed and dedicated to Garmin GNX™ 120 instrument displays.

This mount is designed for performance sailing. It is compatible with masts with a diameter between 115 and 200 mm (4 to 8 inches).

No, the NMEA 2000 T-connectors and angled drop cables required to connect marine instruments to your NMEA 2000 network are included with the marine instruments themselves, not with the mast mount.

The bracket comes with all necessary hardware to assemble the mount and connect devices to the NMEA 2000 network. This includes mounting screws and threaded rods to secure the devices, as well as screws and nuts for the NMEA 2000 connectors. A NMEA 2000 backbone cable is also included to extend your network to other instruments.

No, the specific mounting hardware to install the bracket on the mast is not included. This hardware must be purchased separately, as it may vary depending on your installation requirements and mast configuration.

For installation, you will need a Phillips screwdriver size #2. A drill and drill bits may be required if you need to drill the mast to attach the bracket. Mounting hardware for the mast must be purchased separately.

The mounting arms of the bracket are not pre-drilled. You will need to drill the holes or prepare the mounting arms according to your specific mast installation requirements.

Units are secured to the front panel of the mount using the unit straps, threaded rods, and clamping screws provided with the units. The straps are then secured to the front panel of the mount with the included screws.

Yes, a NMEA 2000 backbone cable is included with the bracket. It is used to extend your NMEA 2000 network to the instruments mounted in the bracket.

Seals are supplied with the devices (not with the mast mount). They have an adhesive side and must be stuck to the back of each device, not on the mast mount.

Yes, you must choose a mast location where the mount will not be damaged by normal boat operation. Additionally, if you plan to use a sun protection cover, ensure the top and bottom of the mount are accessible for its pressure-fastening.