Prodlužovací kabely pro Garminovy 12pinové snímače s vymetáním, 1,3 m

The Garmin 010-11617-44 extension cable is designed to extend the range of compatible Garmin scanning transducers. It adds 1.3 meters (4.3 feet) to the existing transducer cable length, providing greater flexibility for installing your equipment in various vessel configurations.

This extension, part number 010-11617-44, is 1.3 meters long, which is approximately 4.3 feet.

Yes, this extension is made with marine-grade materials specifically selected to withstand harsh environmental conditions. This includes exposure to moisture, salt, and mechanical stress commonly found in marine environments.

No, this extension is specifically optimized to preserve the integrity of the sonar signal. It ensures stable and precise transmission without quality degradation, even over extended lengths, thus guaranteeing optimal performance of your scanning system.

This extension is fitted with 12-pin connectors. These connectors are robust and secure to ensure a reliable connection between your transducer and your Garmin device.

Choosing an official Garmin extension cable such as model 010-11617-44 ensures compatibility and optimal performance with Garmin transducers. Unlike generic extension cables, this model is specifically designed to maintain signal integrity and the performance of Garmin scanning systems, ensuring superior reliability and durability in a marine environment.

Yes, although made with robust marine-grade materials, the extension is designed to provide sufficient flexibility to facilitate routing and installation in complex configurations or on vessels of different sizes.

Yes, part number 010-11617-44 is an official Garmin extension cable, designed and manufactured to Garmin’s quality standards to ensure compatibility and optimal performance with their equipment.

This extension cable is specifically designed for Garmin 12-pin compatible transducers, including those with XID (eXtended IDentification) technology. It is ideal for extending the range of Garmin scanning transducers.

Yes, this extension is also compatible with Airmar 12-pin transducers that feature XID (eXtended IDentification) technology.

To verify compatibility, ensure your Garmin transducer is a scanning transducer and has a 12-pin connector. Compatibility is also guaranteed for Garmin and Airmar transducers equipped with XID technology. You can check your transducer’s manual or Garmin’s technical specifications page to confirm the connector type and XID presence.

This extension is specifically designed for Garmin 12-pin scanning transducers. While it can technically connect to other Garmin 12-pin transducers, its optimization and performance are guaranteed for scanning systems.

The 010-11617-44 extension is designed to add 1.3 meters to the length of your depth sounder cable. Using multiple extensions in series is generally not recommended by Garmin for scanning sonar transducers, as it may potentially affect signal integrity over very long distances and is not a standard supported configuration.

Yes, this extension cable is designed to connect to the transducer, which in turn connects to your compatible Garmin fishfinder/GPS display. It is a link in your detection system chain, ensuring the connection between the transducer and the main unit.

No, this extension is specifically designed for Garmin 12-pin transducers and Airmar 12-pin transducers with XID. Compatibility with other brands is not guaranteed and is not recommended to ensure signal integrity and system performance.

The extension cable is fitted with 12-pin connectors at each end. Connect one end to the cable of your depth sounder and the other end to the sounder port of your compatible Garmin device. The connectors are designed to lock securely and robustly.

During installation, ensure connections are clean, dry, and tightly secured to maintain waterproofing and signal integrity. Avoid excessive cable bending and protect it from potential chafing or cuts along its route on the boat.

Installing the extension itself generally does not require specific tools, as the connections are plug-and-play with secure connectors. However, for routing and securing the cable on your boat, you may need basic tools such as cable ties, cable clamps, or tools for drilling if you need to pass the cable through bulkheads.

To protect the cable, it is advisable to run it through protective trunking or conduits, especially in areas where it could be exposed to abrasion, impacts, or foot traffic. Use cable ties to secure it firmly and prevent it from swinging or snagging, and ensure there is no excessive tension on the connectors.

Installing the extension is generally straightforward and can be done by an individual with basic knowledge of marine wiring and equipment installation. It mainly involves connecting the plugs and routing the cable. However, if you are not comfortable with this type of work or if the installation involves complex cable runs, it is always recommended to hire a professional.