Sada EOS TIX404, 2 světlomety, rozbočovač a řídicí centrum LUX

The EOS TIX404 kit is a complete underwater lighting system, ready to install. It includes:

Two TIX404 hull-through floodlights
One EOS i-Connect Hub concentrator
One EOS-LUX Command Center control unit

Each TIX404 spotlight delivers a total of 16,875 raw lumens. The white light output is 7,500 lumens. The beam angle is 110°, providing a wide light spread beneath the hull.

Yes, the TIX404 floodlights are part of the EOS series and offer full color change (RGBW). They integrate a total of 52 LEDs: 12 white 10 W LEDs, 12 green 3 W LEDs, 12 blue 3 W LEDs, and 16 red 3 W LEDs, enabling a wide color palette.

The TIX404 spotlights feature a marine-grade bronze housing and a borosilicate glass lens. They are rated IP68, ensuring waterproofing and resistance to marine conditions.

The typical lifespan of the LEDs in TIX404 underwater lights is over 50,000 hours, ensuring significant longevity and reliability for your underwater lighting system.

The EOS-LUX control center allows you to manage your lighting system with advanced features, including:

Full RGB color spectrum and white temperature control (2700K to 6500K)Fully configurable zone controlCreation and management of custom lighting scenesLumi-Link integration for control via a certified multifunction display (MFD) or EOS-LUX-SUPRA screenWi-Fi control via smartphone or connected deviceFirmware updates via radio link (OTA)System parameter backup and restoration

Yes, the EOS-LUX control unit allows Wi-Fi control from a smartphone or connected device, either via your multifunction display's (MFD) Wi-Fi or a local Wi-Fi network.

Yes, the EOS-LUX control center supports fully configurable zone control. You can create separate lighting zones for different parts of the vessel, including underwater lights, deck lights, or courtesy lighting. Each light can be assigned to a single zone.

The EOS-LUX system offers a variety of special lighting modes, including:

Color cycles (Spectrum, Ice, Sunset, Miami) with adjustable speedColor sweeps (Ice, Sunset, Miami) with adjustable speedFixed or random strobe modes (any color, adjustable speed)Predefined and customizable color palettesSound-to-Light functionality

Yes, the EOS-LUX control center integrates the "Sound-to-Light" feature, allowing the lighting to react and synchronize with ambient sound.

The EOS TIX404 kit is designed for cruisers, yachts, and superyachts, and is suitable for vessels up to 25 meters (80 feet) in length.

For optimal results, the TIX404 floodlights must be installed between 150 and 250 mm (6 to 10 inches) below the minimum waterline. They must be spaced between 0.8 and 2 meters (2.5 to 6.5 feet) apart to ensure uniform illumination. It is also important not to install them near heat sources such as engine exhausts.

The TIX404 spotlights must be installed between 150 and 250 mm (6 to 10 inches) below the vessel’s minimum waterline for optimal performance.

The TIX404 floodlights can be installed on GRP hulls (glass-reinforced plastic or fiberglass) and wooden hulls. For metal or carbon fiber hulls, a hull isolation kit is required.

Yes, the TIX404 spotlights must be connected to the vessel's DC grounding system via a bonding strap to provide protection against electrolytic/galvanic corrosion. However, if a hull isolation kit is used for installation on a metal hull, grounding of the lights is not required.

The system (TIX404 spotlights and EOS-LUX control unit) operates within a supply voltage range of 10.5 to 31 V DC. Each TIX404 spotlight has a maximum power draw of 5.8 A at 12 V or 2.9 A at 24 V. The EOS-LUX control unit consumes a maximum of 0.5 A at 12/24 V.

During the initial installation, the system requires a quick setup. First, the connected lights on the EOS-LUX network must be discovered. Then, the user can choose between a "Single Zone" or "Multi Zone" mode and define the positions of the lights around the vessel to ensure proper operation of modes such as sweeping. The default password to access preferences is "0000".

The EOS-LUX control center is compatible with several brands of multifunction displays, including:

Garmin (compatible OneHelm)Raymarine (Axiom with the partner Lighthouse app)Navico (Simrad NSO evo3/3S and EVO2, NSS evo3/3S, NSX, IDS and GO**; B&G Zeus³ Glass Helm, Zeus³/3S and Vulcan***; Lowrance HDS Live, HDS Carbon, Elite FS)Furuno (Navnet TZ Touch 3 series, requires an SD card Part Number 60-0377)It is recommended to check your MFD compatibility before purchase.

The TIX404 spotlights and the EOS-LUX control unit come with a 3-year warranty.