Sada pro přemístění mikrofonu (VHF 210/210i)

Yes, this repositioning kit is specifically designed to be compatible with the Garmin VHF 210 marine radio.

Yes, the Garmin microphone repositioning kit is compatible with the VHF 215 AIS marine radio.

Yes, this kit is fully compatible with Garmin marine VHF radios VHF 210 AIS and VHF 215, as well as the VHF 210 and VHF 210i models.

The Garmin microphone repositioning kit (010-12506-02) is specifically designed for the Garmin marine VHF radios VHF 210, VHF 210 AIS, VHF 210i, VHF 215 and VHF 215 AIS. Compatibility with other models is not guaranteed and not recommended.

No, this kit is a Garmin accessory designed with a 12-pin connector system specific to Garmin VHF 210, VHF 210 AIS, VHF 210i, VHF 215, and VHF 215 AIS radios. It is not compatible with VHF radios from other brands.

The main function of this kit is to extend the handheld microphone away from the main unit of your Garmin VHF radio. This improves onboard ergonomics by making the microphone more accessible in setups where the radio is not directly within reach, such as on flybridges or central consoles.

The repositioning kit comes with a 3-meter cable, which is approximately 10 feet.

This kit uses a 12-pin connector system, ensuring a reliable and stable connection between the microphone and the VHF radio's main unit.

Using this kit offers several advantages, including:

Improved ergonomics: The microphone is easier to access, even if the radio is installed in a remote location.Flexible layout: Allows for more flexible installation of the radio and microphone on different types of boats (central consoles, flybridges).Ease of use: The microphone is always within reach for quick and efficient communication.

No, this kit is an accessory designed to reposition your existing handheld microphone. It does not include a replacement microphone.

Yes, the design of this kit complies with Garmin's marine quality standards, allowing it to withstand the harsh marine environment.

The microphone repositioning kit weighs 0.6 lb (approximately 272 g).

The kit is packaged in a box measuring 2 inches in height (approximately 5 cm), 5 inches in width (approximately 12.7 cm), and 7 inches in length (approximately 17.8 cm).

Yes, this kit is designed for "plug-and-play" installation. It is intended to be simple and does not require advanced technical skills.

No, installing this kit requires no additional tools or wiring. It is designed for simplified integration into existing systems.

The kit installation is "plug-and-play" for the electrical connection and does not require specific tools for this part. However, for clean cable routing or to mount your existing microphone support in a new location, basic tools may be required depending on your setup.

The kit uses a 12-pin connector system. It connects on one end to the main unit of your compatible VHF radio (VHF 210/210i/215/215 AIS) and on the other end to your existing handheld microphone, acting as an extension.

The installation process is simple and "plug-and-play". Disconnect the microphone from the main unit of your VHF radio, connect the kit cable between the radio and the microphone, then position the microphone where desired using the 3-meter cable length.

With a 3-meter cable length, you can install the microphone in more convenient and accessible locations. This includes remote helm stations, central consoles, or even on a flybridge, where the VHF radio’s main unit is not within direct reach.

The installation of the kit itself, for the electrical connection, does not require drilling new holes. However, if you wish to mount your existing microphone support in a new remote location, it may be necessary to drill holes for its installation.