SUPRA TIX804, podvodní LED světlomet s výměnnou průhlednou optikou

The Garmin SUPRA TIX804 underwater light delivers a total luminous output of 27,000 lumens. In pure white mode, it specifically delivers 12,000 lumens. This performance is achieved with a configuration of 24 x 10W white LEDs, 24 x 3W green LEDs, 24 x 3W blue LEDs, and 32 x 3W red LEDs, using HICOB Array technology.

The SUPRA TIX804 spotlight features the "Full EOS Color Change (RGBW)" function, meaning it can display a full color spectrum including red, green, blue, and white, as well as many intermediate shades.

The LEDs integrated in the SUPRA TIX804 spotlight are designed for exceptional durability, with a typical lifespan of over 50,000 hours of use.

The SUPRA TIX804 spotlight housing is made of marine-grade bronze, a robust and corrosion-resistant material. The lens is made of borosilicate glass, ensuring enhanced optical clarity and durability in marine environments.

Yes, the SUPRA TIX804 spotlight has IP68 certification, ensuring full protection against dust and prolonged immersion in water, making it perfectly suitable for underwater use.

The SUPRA TIX804 spotlight provides an ultra-wide beam angle of 110°, ensuring extended light coverage and a strong halo effect around the vessel.

Here are the dimensions and weight of the SUPRA TIX804 spotlight:

Diameter of the light face: 120 mm (4.72 in)Height of the housing profile (overall): 8.5 mm (0.34 in)Shaft length: 184 mm (7.24 in)Weight: 2.7 kg (5.95 lb)

For optimal performance, the SUPRA TIX804 spotlight must be installed between 150 mm and 250 mm (6 to 10 inches) below the vessel’s minimum waterline.

The SUPRA TIX804 spotlight is designed to be installed on GRP hulls (fiberglass) and wooden hulls. For metal hulls, the use of a hull isolation kit is recommended.

The size of the hole to drill in the hull depends on whether an insulation sleeve is used or not:

Without insulation sleeve: The hole must be 86 mm (3-3/8 inches). With insulation sleeve (reference 60-0211): The hole must be 93 mm (3-21/32 inches).

The SUPRA TIX804 spotlight operates within a supply voltage range of 10.5 to 31 V DC. Maximum current draw is 8.8 A at 12 V or 4.4 A at 24 V.

Yes, it is critical to use a marine-grade adhesive approved for the application, such as 3M 4200 Marine or an equivalent product, to ensure a watertight seal between the lighting module and the isolation sleeve, as well as between the isolation sleeve and the vessel's hull.

Connection to the grounding system (bonding) is generally required for galvanic protection. However, if a hull isolation sleeve is used, it is important NOT to connect the underwater light to the vessel's grounding system, as the sleeve is designed to electrically isolate the light from the hull.

Thanks to its interchangeable through-hull design, maintenance of the LED assembly and drivers of the SUPRA TIX804 projector can be performed from inside the hull. This eliminates the need to take the vessel out of the water for servicing.

The SUPRA TIX804 spotlight can be controlled via several options:

A certified MFD screen (multifunction display)An EOS-LUX-SUPRA screenWi-Fi control from a smartphone or connected device (via an MFD or Wi-Fi 2204i module)

The SUPRA TIX804 spotlight uses the Lumi-DMX communication protocol, which is compatible with DMX 512 and RDMX standards.

The SUPRA TIX804 floodlight is suitable for a wide range of vessels, including sports boats, cruisers, yachts, and superyachts, with a recommended maximum vessel length of 100 meters (330 feet).

The Garmin SUPRA TIX804 underwater light comes with a three-year warranty from the original purchase date, covering manufacturing defects.

The warranty for the SUPRA TIX804 spotlight may be voided in the following cases:

Improper use or misuse of the product. Incorrect installation or installation by unqualified personnel. Negligence or inappropriate handling. Damage caused by disasters (fire, flood, storm, lightning). Unauthorized repair or modification. Failure to comply with installation, maintenance, and usage guidelines provided in the product documentation.

No, it is not necessary to take your boat out of the water to service the Garmin SUPRA TIX804 underwater light.

Thanks to its interchangeable through-hull design, the LED assembly and drivers can be serviced and replaced from inside the hull. This unique feature greatly simplifies maintenance by eliminating the need to haul the vessel ashore.