Prodlužovací kabel ActiveTarget 3 m (10 stop)

This Lowrance ActiveTarget extension cable measures 3 meters (or 10 feet).

This cable is designed to extend the connection between the ActiveTarget transducer and the ActiveTarget sounder module. It provides increased flexibility for positioning your equipment on the boat.

Yes, like all Lowrance accessories, this cable is designed to withstand the demanding conditions of the marine environment, including exposure to salt water and UV.

The reference number (SKU) for this extension cable is 000-16069-001.

Yes, this is an official Lowrance accessory, ensuring compatibility and optimal performance with your ActiveTarget systems.

The weight of this extension cable is approximately 0.2 kg.

No, this extension cable is specifically designed for ActiveTarget and ActiveTarget 2 transducer systems. It is not compatible with StructureScan or Active Imaging transducers.

This cable uses proprietary Lowrance connectors specific to ActiveTarget systems, ensuring a secure and watertight connection.

The extension cable does not directly improve the performance of the depth sounder. Its role is to provide installation flexibility, allowing you to position the transducer and the module optimally for better data acquisition based on your boat's configuration.

Yes, the cable is designed to be sufficiently flexible to facilitate routing through the various sections of your boat while maintaining its robustness and resistance to marine stresses.

This extension cable is fully compatible with Lowrance ActiveTarget first-generation real-time fishfinder systems as well as the ActiveTarget 2 system.

Lowrance does not recommend using multiple extension cables in series. For optimal performance and to avoid any signal degradation, it is preferable to use a single extension cable of the appropriate length.

Yes, this cable is compatible with Lowrance HDS Live, Elite FS and HDS Carbon multifunction displays, provided they are connected to an ActiveTarget or ActiveTarget 2 module, as the cable connects the transducer to the ActiveTarget module, not directly to the display.

Yes, this extension cable is compatible with all ActiveTarget modules, including the original versions and ActiveTarget 2.

No, this cable is fitted with proprietary Lowrance connectors and is specifically designed for Lowrance transducers and ActiveTarget modules. It is not compatible with equipment from other manufacturers.

Installation is straightforward: simply connect one end of the extension cable to the ActiveTarget transducer port and the other end to the corresponding port on the ActiveTarget module. Ensure connections are tight and watertight.

No, no specific tool is generally required to connect this cable. The connectors are designed to be screwed or clipped by hand, ensuring a secure connection.

Yes, during installation, avoid pinching the cable, bending it at sharp angles, or routing it near electrical interference sources (such as engine power cables). Use cable ties to secure it firmly and protect connectors from moisture and shocks.

Yes, this cable is designed for marine use and can be permanently installed outdoors. It is made with materials resistant to UV and salt water, but it is still recommended to protect it from excessive chafing and impacts.

The 3-meter (10-foot) Lowrance ActiveTarget extension cable, part number 000-16069-001, is designed to extend the connection between your ActiveTarget™ or ActiveTarget 2 transducer and the ActiveTarget module.

It provides several benefits for installing your fishfinder system:

Increased flexibility in positioning components on your boat. It is particularly useful for pole mounts requiring additional length. Makes it easier to disconnect the transducer for storage or transport. Enables multi-station configurations, allowing real-time sonar visualization from different observation points.