LED pás COB – 12 V DC – 1 metr – vodotěsný IP68 – teplá bílá – 600 lm/m

COB (Chip-on-Board) technology integrates multiple LED chips directly onto the same printed circuit board. This results in a more uniform and homogeneous light source, eliminating the point-light effect often seen with traditional LED strips. It also improves heat dissipation and allows for a higher LED density.

This COB LED strip provides 600 lumens per meter, ensuring effective and sufficient lighting for many marine and outdoor applications.

This specific MANTAGUA LED strip model is supplied in a 1-meter length.

Yes, this LED strip has an IP68 waterproof rating. This means it is fully protected against dust and can withstand continuous immersion, making it perfectly suited for outdoor use and marine environments.

The estimated lifespan of this LED strip is 50,000 hours, provided a DC/DC regulator is used to ensure stable power supply and optimize long-term performance.

No, this LED strip is not self-adhesive. It requires a specific mounting method suited to the installation environment. It is recommended to choose a robust and durable mounting solution to ensure its stability, particularly in a marine environment.

The LED strip comes with 10 cm of electrical wires at each end, making it easier to connect to your power system.

This LED strip operates on a 12VDC (direct current) power supply.

Yes, operating on 12VDC, this LED strip is compatible with most onboard electrical systems found on boats and other marine vehicles.

Yes, MANTAGUA strongly recommends the use of a DC/DC regulator. This practice is essential to optimize the lifespan of the LED strip (estimated at 50,000 hours) and ensure stable light output, particularly in marine electrical installations that may experience voltage fluctuations.

The main difference lies in light diffusion. COB technology provides more uniform and continuous light, without the distinct light points that can be observed with SMD LEDs (such as 3528 or 5050). COB strips integrate a greater number of LED chips per meter, which contributes to this uniformity.

This COB LED strip integrates a high density of 384 LEDs per meter, providing smooth and uniform light diffusion.

This LED strip provides a 120° beam angle, enabling wide and efficient lighting of the targeted area.

Yes, it is imperative to respect the polarity when connecting the LED strip to ensure proper operation and avoid any damage.

Yes, like most LED strips, this COB model is flexible, allowing it to adapt easily to contours and curved surfaces for various installations.

This specific LED strip model (reference 01587) is offered only in 1-meter length.