Navipro 2MN trojbarevné + kotviční světlo – stožárové světlo MANTAGUA

This LED navigation light combines several essential functions for safety at sea:

Port side light (red)
Starboard side light (green)
Masthead light (white)
Anchor light (omnidirectional white)

This navigation light offers a visibility of 2 nautical miles (2NM), compliant with requirements for vessels under 20 meters.

The Mantagua Navipro light is optimized for low power consumption. Its typical consumption is 3.24W, with a maximum power of 4W.

The light is designed with robust materials resistant to marine environments:

The transparent parts are made of polycarbonate (UV-proof PC), resistant to UV rays. The housing is made of PC-ASA. The "pedestal" base is made of PC-ASA or polyamide 6. The mounting plate or bracket is made of aluminum grade 6082.

Yes, this light is designed for increased durability in demanding marine environments. It is resistant to corrosion, shocks, and vibrations. Additionally, its IP67 rating ensures complete waterproofing.

This navigation light has compact dimensions of Ø 69 x H 95 mm and a light weight of only 170g (0.17 kg), making it easy to install at the masthead.

Yes, the Mantagua Navipro light uses a single LED light source for all its functions, ensuring low power consumption and a long lifespan.

This Mantagua Navipro navigation light is manufactured in France.

This light is certified by Bureau Veritas with WHEELMARK certification 60427/B0 MED. It also meets the requirements of the following regulations:

COLREG Annex I/14 IMO Res. A.694(17) IMO Res. MSC.253(83) EN 14744:2005 and IEC 60945 (2002) European Directive 2014/90/EU Approved SOLAS

The anchor light function is a white all-round light. It is used when the vessel is at anchor, to signal its presence at 360 degrees and ensure visibility to other vessels, especially at night.

Yes, the anchor light function can include an automatic day/night mode, which allows the light to activate only when ambient light conditions require it.

No, this navigation light is specifically designed for sailboats under 20 meters.

Yes, this Mantagua Navipro navigation light is SOLAS (Safety of Life at Sea) approved, certifying its compliance with international maritime safety standards.

This Mantagua Navipro navigation light operates with a regulated power supply of 10 to 30 VDC. It is therefore compatible with 12VDC and 24VDC onboard electrical systems.

This light is specifically designed for sailboats under 20 meters, providing combined navigation and anchor light functions suitable for this category of vessels.

No, this light is specifically designed not to interfere with the vessel’s AIS and VHF systems, ensuring reliable onboard communications.

The recommended magnetic safety distance for this light relative to a compass is 15 cm, to avoid any interference with compass readings.

No, the power supply for this navigation light is non-polarized, which simplifies its connection to the boat's electrical system.

The light is designed for installation at the masthead. It is equipped with a "pedestal" base for easy and secure mounting.

This light has an IP67 protection rating. This means it is completely protected against dust (first digit 6) and can be temporarily submerged (up to 1 meter for 30 minutes) without water ingress (second digit 7), ensuring perfect waterproofing in a marine environment.