MasterBus kabel 25 m

It serves as the central link for your embedded energy management network. It handles both data transmission and power supply for compatible MasterBus peripheral devices.

No, this cable is multifunctional. It is designed to transmit simultaneously:

Communication data for the networkPower supply for small peripheral devices

The system uses a daisy-chain architecture. Native MasterBus devices have two ports, allowing this cable to be connected from one device to the next in a straightforward manner.

Yes, this is possible. However, for integrating third-party devices or older generations that are not natively compatible, a specific interface will be required.

Yes. For installations requiring precise adjustments, particularly when passing through narrow bulkheads, Mastervolt offers an optional DIY kit. It allows you to cut the cable and re-terminate the connectors.

This 25-meter length is particularly suitable for main connections spanning large vessels or boats, linking distant groups of equipment.

No. Unlike other marine protocols that require multiple components and branch-offs, this cable is the only type of wiring you need to connect your MasterBus devices.

Yes, it meets the strictest environmental standards. It complies with the RoHS directive (EN 63000:2018 standard), ensuring the absence of hazardous substances such as lead or mercury.

This cable meets industrial standards and holds CE and UKCA certifications, ensuring compliance with European and British safety requirements.

No, MasterBus terminators are separate components. They are required to terminate both ends of your daisy-chain network but must be purchased separately.

To connect older-generation devices, you must insert a dedicated communication interface between the device and the MasterBus network. The cable will then connect to this interface.

The MasterBus cable only powers small peripheral devices on the network (such as displays or control panels). Power devices, like inverters or chargers, require their own dedicated power wiring.

The installation can be made easier by using the optional mounting kit. It allows you to pass the bare cable through smaller holes in the bulkheads, then crimp the connector once the cable is in place.

Mastervolt’s native products come standard with two communication ports. This allows for one incoming and one outgoing cable to continue the daisy chain.

Yes, the range offers many lengths. You will find short connection cables ranging from 0.2m to 15m, as well as a full 100m reel for custom wiring.

Absolutely. Although it is very popular in boating, this cable is also designed to significantly simplify mobile installations, such as recreational vehicles, camper vans, or service vehicles.

No, the MasterBus network is designed so that power for small devices is carried directly over the same communication cable, which greatly simplifies the overall wiring diagram.

Yes, as it is specifically designed for marine and mobile installations, it is made with robust materials to withstand the demanding conditions at sea and ensure optimal reliability.

The cable uses standard RJ45-type connectors, specifically adapted for the MasterBus protocol. They allow quick, secure, and tool-free connection to all compatible devices.