MasterBus kabel 6 m

This cable is designed to connect the various devices in your Mastervolt power network. It simultaneously provides fast data transmission and electrical power to compatible peripheral devices using the MasterBus protocol.

Installation is straightforward thanks to the MasterBus architecture. Compatible devices come with two ports as standard. Simply connect a cable from one port to the next to create a direct daisy-chain between your equipment.

This cable is specifically designed for MasterBus protocol by Mastervolt. To connect devices without native support for this connector, a specific Mastervolt interface will be required.

No, one of the major advantages of the MasterBus architecture is that it combines both data communication and power supply in a single cable, greatly simplifying your installation.

This specific model (reference 77040600) measures exactly 6 meters in length. This is an ideal length for connecting equipment located in adjacent compartments on your boat.

No, the MasterBus network does not require a separate power supply for small peripherals. The cable distributes the necessary power directly from the main devices (such as chargers or inverters) to the peripherals.

The 6m MasterBus cable weighs 202 grams. Its light weight and flexibility make it easy to install in cable runs and conduits on your vessel.

If you want to integrate equipment without native MasterBus ports into your network, you will need to use a dedicated MasterBus interface, offered by Mastervolt, to bridge the device and the communication cable.

Yes, this cable meets the strictest international standards. It holds CE, UKCA, and RoHS certifications, ensuring it is manufactured without hazardous substances such as lead, mercury, or cadmium.

Yes, in a MasterBus daisy-chain installation, it is mandatory to place a MasterBus terminator (part number 77040000) on the first and last device of the network to ensure stable and interference-free communication.

Absolutely. It is perfectly suited to ensure the uninterrupted transmission of data between your chargers, inverters, displays and Mastervolt-compatible batteries.

Yes, its robust design is intended for the marine environment. It provides a secure and durable connection, resistant to the typical vibrations encountered on board boats.

Thanks to its fine design and lightweight, the cable easily slides into technical conduits and standard cable passages. Simply avoid pinching it or bending it at too sharp an angle when passing through bulkheads.

Yes, the 6m MasterBus cable is supplied fully assembled with its specific connectors at each end. It is ready to be plugged in immediately (plug-and-play).

Although the MasterBus system is designed to be safe, it is still recommended to power off the main equipment before modifying the communication network to avoid any detection or configuration errors.

The 6-metre length offers an excellent compromise. It sits ideally between short cords (3 m) and long lengths (10 m), making it perfect for connecting devices in adjacent compartments or spaces without excessive excess cable.

No, the MasterBus cable is bidirectional. You can connect either end to a Mastervolt device port; data and power transmission will work correctly in both directions.