Adaptační kabel (25 a 7 pinů Kabel Y z 25 pinů) pro sondu Realvision a přímou sondu 600W Airmar na AXIOM RV

The Raymarine A80491 adapter cable is designed to simultaneously connect two types of transducers to a single 25-pin port on an Axiom RV multifunction display. It allows combining the high-resolution imaging capabilities of a RealVision transducer with the bottom detection performance of a traditional Airmar 600W transducer, consolidating sonar capabilities on a single screen.

Cable A80491 is specifically designed for Raymarine Axiom RV displays. These screens have the 25-pin port required for this setup, enabling direct integration of data from both transducers.

This Y-cable allows connection of two types of transducers:

A Raymarine RealVision transducer via its 25-pin connector. A traditional Airmar transducer with a maximum power of 600W via direct connection using its 7-pin connector.

No, cable A80491 is a compact integration solution that allows you to directly connect both transducers to your Axiom RV display without requiring dedicated external sounder modules such as CP100, CP200, CP300, CP470, or CP570. It simplifies installation by consolidating sonar signals on a single MFD.

Using the Y cable A80491 offers several advantages:

Optimized integration: It allows combining data from two transducers (RealVision and Airmar 600W) on a single Axiom RV display via a single port. Simplified installation: It eliminates the need for bulky external sounder modules, which is ideal for vessels with limited space. Extended features: You get both the detailed imaging (DownVision, SideVision, and RealVision 3D) from the RealVision transducer and the depth, temperature, and fish detection capabilities of the Airmar 600W transducer.

This cable simplifies installation by allowing simultaneous connection of a RealVision transducer (25-pin) and an Airmar 600W transducer (7-pin) to a single 25-pin port on your Axiom RV display. This eliminates the need for dedicated external sounder modules or Axiom Pro displays with multiple transducer ports, providing a compact and direct solution for integrating two sonar technologies on a single MFD.

When the Airmar 600W transducer is connected via A80491 cable, you can fully utilize its features to obtain depth data, water temperature, and fish detection. This data complements the high-resolution images (DownVision, SideVision and RealVision 3D) provided by the RealVision transducer.

The cable is specifically designed for a traditional Airmar transducer with a maximum power of 600W, connecting directly via the 7-pin port. While other 7-pin transducers may physically connect, compatibility and optimal performance are guaranteed only with Airmar 600W transducers for which it was designed.