B175H BB TH profilovaná 20°

The CHIRP (Compressed High-Intensity Radiated Pulse) technology integrated in the B175H transducer emits a frequency sweep over a wide band (130-210 kHz) rather than a fixed frequency. This provides a greater quantity of data, improved discrimination of targets (fish) from seabed structures, and increased resolution of underwater details.

The Raymarine B175H transducer operates on a high-frequency band (H), typically between 130 and 210 kHz. This range is optimized for fish detection and detailed seabed mapping in mid-depth waters.

The B175H transducer is a through-hull (TH) model featuring CHIRP single-high-frequency (H) technology. Its internal ceramic element is tilted at 20 degrees to compensate for hull angle. It is designed to provide excellent target separation and detailed resolution of the seabed.

The B175H transducer is particularly suited to anglers targeting pelagic and demersal species, who require precise detection in the water column and detailed mapping of bottom structures. Its high-frequency band is ideal for medium depths.

The B175H transducer has an RMS power of 1000 W. This power enables excellent detection and water penetration performance, suitable for sport fishing and navigation.

With its 1000 W power and high-frequency band, the B175H transducer can typically reach detection depths of up to about 300 meters (1000 feet) in optimal conditions, though this may vary depending on water salinity and seabed composition.

The Raymarine B175H is a single-frequency transducer. It operates in the high-frequency (H) band from 130 to 210 kHz. Although it is single-frequency, CHIRP technology allows it to sweep this wide band for detailed detection.

Yes, the Raymarine B175H transducer integrates a water temperature sensor, allowing this information to be displayed directly on your compatible multifunction display.

"20-degree angled" means the internal ceramic element of the transducer is tilted at 20 degrees. This tilt compensates for the deadrise angle (the V-shape of the hull) of fiberglass boats, which typically ranges from 16 to 24 degrees, ensuring the sonar beam is directed vertically downward for optimal bottom detection.

The B175H transducer is a through-hull model specifically designed for installation on fiberglass hulls. It is ideal for boats with a deadrise angle (hull V) between 16 and 24 degrees thanks to its 20-degree tilted element.

No, thanks to its 20-degree angled element ("20° fairing"), the B175H transducer is designed to compensate for the hull angle of boats (between 16 and 24 degrees) without requiring an external fairing block. This simplifies installation and reduces drag.

The B175H transducer is compatible with Raymarine multifunction displays (MFD) equipped with CHIRP sonar technology. This includes the Axiom and Element series, as well as older models like the gS and eS series, provided they have the integrated or compatible external CHIRP sonar module.

The need for an external sonar module depends on the Raymarine multifunction display used. Newer MFDs like the Axiom Pro/RVX or Element series often have a built-in CHIRP module. For other MFDs, an external CHIRP-compatible sonar module (e.g., CP470 or CP570) may be required to fully utilize the B175H's capabilities.

No, the B175H transducer is a traditional CHIRP transducer optimized for bottom and fish detection in 2D view. It is not designed for side-imaging (SideVision) or down-imaging (DownVision) technologies, which require specific transducers (such as RV-100 or CPT-DV/DS).

Yes, it is possible to connect multiple CHIRP transducers (for example, a B175H for high frequencies and a B175L for low frequencies) to a Raymarine system, provided the multifunction display or external sonar module has the necessary ports and is capable of handling multiple CHIRP channels simultaneously (for example, a CP570). This allows for a wider frequency coverage.