Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 11%

Raymarine

A80043

B175M BB TH profilovaná 0°

Le RAYMARINE B175M BB TH profilée 0 deg est un transducteur traversant CHIRP médium, optimisé pour les coques à 0 degré de dérive. Il offre un équilibre entre pénétration en profondeur et résolution des cibles pour une détection fiable.

Ce modèle intègre la technologie broadband CHIRP pour une performance de sondeur améliorée.

Le produit inclut le transducteur B175M BB TH profilée 0 deg.

Prix publicBénéficier du tarif pro

41.834,33 CZK

41.834,33 CZK ~~47.432,44 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Podporované technologie sonaru	CHIRP
Provozní napětí	12V
Frekvence sonaru	85-135
Provozní teplota	-20°C à +50°C
Špičkový výkon	1000.0
Maximální hloubka odečtu	600.0
Materiál sondy	Bronze
Typ konektoru sonaru	Raymarine 9-pin
Délka kabelu	10.0
Šířka produktu	135 mm
Integrovaný teplotní čidlo	Oui
Výška produktu	140 mm
Kompatibilní zobrazovače	Écrans multifonctions Raymarine CHIRP (ex: Axiom, Element, séries eS/gS avec module sondeur compatible)
Hloubka produktu	135 mm
Stupeň krytí IP	IPX8
Bezpečná vzdálenost od kompasu	50 cm
Typ montáže	Traversant la coque (0° de dérive)
Certifikace	CE
Rozsah měření teploty vody	-5°C à +40°C
Úhlové pokrytí paprskem	16-24°
Typ rybolovu	Mer, lac, traîne, verticale
Integrovaný snímač rychlosti	Non
Úroveň uživatele	Intermédiaire

Description détaillée

Snímač RAYMARINE B175M BB TH profilovaná 0° je určen pro snímání mořského dna a podvodních cílů. Tento model využívá technologii CHIRP střední frekvence, která poskytuje vyvážené frekvenční pásmo pro všestranné použití při pobřežní i dálkové plavbě.

Technologie CHIRP střední frekvence a instalace

B175M využívá pásmo CHIRP střední intenzity, které umožňuje dosáhnout kompromisu mezi hloubkovým průnikem snímačů nízké frekvence (např. typ B175L) a jemným rozlišením cílů snímačů vysoké frekvence (např. typ B175H). Jeho konstrukce "profilovaná 0°" je specificky navržena pro trupy s náklonem 0 stupňů, čímž zajišťuje optimální orientaci paprsku bez nutnosti dodatečného kompenzačního bloku nebo složitého úhlového nastavení. Tato vlastnost jej odlišuje od snímačů s nakloněným prvkem pro 12 nebo 20 stupňů náklonu, což zjednodušuje instalaci na ploché trupy. Působí jako všestranné řešení pro uživatele sonaru CHIRP značky Raymarine, poskytující spolehlivé zjišťování ryb a přesné mapování dna.

Integrace a výkon

Kompatibilní s multifunkčními displeji Raymarine využívajícími technologii CHIRP, snímač RAYMARINE B175M BB TH profilovaná 0° umožňuje přímou integraci. Umožňuje navigátorům a rybářům využívat pokročilé schopnosti svých sonarů pro lepší pochopení podmořského prostředí. Jeho umístění v řadě snímačů Airmar/Raymarine jej činí vhodným pro aplikace vyžadující jak dobrou dosah, tak schopnost rozlišování cílů, aniž by se specializoval na extrémní hloubky nebo ultra-vysoké rozlišení malých detailů na povrchu.

Avis de l'expert

Pol CONIN

Digitální manažer

« B175M BB TH transducer 0 deg: CHIRP balance for flat hulls »

The Raymarine B175M BB TH profiled 0° transducer is a suitable choice for vessels with a 0° hull deadrise, typical of flat-bottom or inflatable boats. The "profiled 0°" designation means the transducer's internal element is pre-angled to compensate for the lack of hull angle, ensuring the CHIRP beam is directed vertically toward the seabed. It is critical to verify the hull deadrise before installation, as using this model on a hull with significant deadrise (e.g., 12° or 20°) would tilt the beam and result in suboptimal sounder performance. In such cases, a transducer with the appropriate tilt angle would be required.

This CHIRP medium transducer (B175M) provides an excellent balance for offshore fishing, covering a wide range of depths without the extreme trade-offs of low-frequency transducers (maximum range, lower resolution) or high-frequency transducers (maximum resolution, limited range). It integrates seamlessly into a Raymarine CHIRP-compatible system, and its through-hull installation minimizes exposure to turbulence, optimizing signal quality. It is a reliable option for users seeking a versatile solution for fish detection and seabed mapping without the installation complexity of an external fairing block transducer.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

B175M BB TH profilovaná 0°

41.834,33 CZK

41.834,33 CZK ~~47.432,44 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the RAYMARINE B175M BB TH profiled 0° transducer?

This is a Raymarine thru-hull transducer featuring CHIRP medium technology. It is designed for seabed and underwater target detection, providing a versatile solution for navigation and fishing.

What is the output power of this transducer?

The RAYMARINE B175M BB TH profiled 0° transducer has an output power of 1 kW.

What is the frequency range used by the CHIRP medium technology in the B175M?

This transducer’s CHIRP medium technology uses a frequency range of 85 to 135 kHz.

What are the advantages of CHIRP medium technology compared to other frequencies?

The B175M’s CHIRP medium technology offers a good balance between:

Deep penetration, typically associated with low-frequency transducers.Fine target resolution and echo separation, typical of high-frequency transducers.This makes it versatile for a variety of fishing conditions and depths.

Is this transducer suitable for deep-sea fishing or coastal fishing?

Yes, the B175M is designed to be versatile and suitable for both coastal navigation and offshore fishing, providing reliable detection in both environments.

Does the B175M provide good discrimination of underwater targets?

Yes, thanks to its CHIRP medium technology, the B175M transducer offers good target discrimination, allowing individual fish and schools of fish to be distinguished.

Is this transducer capable of accurately mapping the seabed?

Yes, the RAYMARINE B175M BB TH profiled 0° transducer is capable of providing accurate seabed mapping, essential for navigation and fishing zone detection.

Does the B175M transducer include a water temperature sensor?

Yes, this transducer is equipped with an integrated water temperature sensor, providing essential data for fishing conditions analysis.

What does the "0° faired" marking on this transducer mean?

The "0° profiled" marking indicates that the transducer is specifically designed for installation on sailboat hulls with a deadrise (V-angle) of 0 degrees. This design ensures optimal beam orientation without requiring an additional fairing block.

On which type of hull should the B175M profiled 0° be installed?

This transducer is ideal for flat hulls or those with a 0-degree deadrise, ensuring optimal performance and simplified installation.

Is it necessary to use a fairing block with this model?

No, thanks to its "0° profiled" design, this transducer does not require a fairing block to correct the angle and ensure optimal readings.

Is the B175M a through-hull transducer?

Yes, the "TH" in its name stands for "Thru-Hull", indicating that it is a through-hull transducer installed by drilling through the boat's hull.

Does installing a through-hull transducer require drilling the hull?

Yes, installing a through-hull transducer such as the B175M requires drilling a hole in the boat's hull for the transducer body and cable to pass through.

What are the advantages of a through-hull transducer compared to a transom-mounted model?

Through-hull transducers like the B175M offer several advantages:

Less turbulence under the transducer, improving signal quality.Better performance at high speed.More stable and accurate seabed readings.

Does the "0-degree profiled" design simplify installation?

Yes, this design greatly simplifies installation on flat hulls as it eliminates the need for complex calculations or angular adjustments to properly orient the beam.

With which Raymarine systems is this transducer compatible?

This transducer is compatible with Raymarine multifunction displays equipped with CHIRP technology, ensuring direct integration and optimal use of its capabilities.

Is this transducer compatible with fishfinders from brands other than Raymarine?

No, the RAYMARINE B175M BB TH faired 0° transducer is specifically designed for direct and optimal integration with Raymarine CHIRP systems.

Does the B175M transducer require an external fishfinder module with Raymarine multifunction displays?

This depends on the Raymarine multifunction display model. Some recent models include a CHIRP fishfinder directly (such as the Axiom Pro or RVX series), while others require an external CHIRP-compatible fishfinder module, such as the Raymarine CP470 or CP570, to work with this transducer.