Balení sekundární stanice Ray90 bezdrátové – včetně bezdrátového kombinovaného přístroje Ray90 a aktivního reproduktoru

The Ray90 T70434 Raymarine secondary station pack without wire is designed to extend the communication capabilities of your Raymarine Ray90 or Ray91 fixed VHF system. It allows adding a fully wireless secondary control station aboard your boat, providing increased flexibility and mobility without the constraints of fixed wiring.

The T70434 pack includes the following main components:

A Ray90 wireless handset. An active speaker. These items allow you to create a complete secondary station for your Ray90 or Ray91 VHF system.

The Ray90 wireless handset replicates the essential functions of the main station and provides the following controls:

Push-To-Talk (PTT) button for voice transmission.Channel Up/Down buttons for VHF channel selection.Quick access to channel 16 (+).Transmit power adjustment (HI/LO between 25 W and 1 W).DISTRESS button to trigger a DSC distress call.Integrated LCD screen.Volume and squelch controls.Integrated speaker.

The main difference lies in connectivity. Unlike wired options such as the Raymic handheld (A80289), which requires direct wiring to the base station, the T70434 pack is fully wireless. This provides freedom of movement around the boat and simplifies installation by avoiding complex cable routing for a secondary station.

The active speaker included in the pack ensures clear and powerful audio playback. This sound quality is essential for effective listening to VHF communications, even in noisy marine environments, ensuring that important messages are distinctly heard.

For optimal software compatibility with the wireless secondary station pack, the Raymarine Ray90 or Ray91 base station requires software version v1.61a.

One of the main advantages of this pack is that it simplifies installation by avoiding complex cable routing for a secondary station, unlike wired options. The handheld unit is wireless, but the charging cradle and active speaker require electrical connections to the boat's 12V power supply.

Yes, to optimize performance, it is recommended to conduct a site survey before installation. You must consider general location requirements such as ventilation, mounting surface, cable routing, and avoid electrical or RF interference. Wireless components should be positioned to minimize obstacles and sources of interference.

The wireless handset charging holster must be installed in a suitable location on board, allowing easy access for charging the handset. It requires a connection to the boat's 12V power supply.

The active speaker can be mounted using the provided fasteners in a location that ensures clear and effective audio playback. It is important to choose a spot where sound is not obstructed and where the 12V power wiring can be easily routed.

The tools commonly required for installing this type of equipment generally include:

A screwdriver (flathead and/or Phillips).A drill with appropriate drill bits for mounting points.Wire cutting and stripping tools.A multimeter to check electrical connections.Appropriate fastening hardware (screws, washers, etc.).

To turn on the cordless handset, press and hold the power button (located on the top of the handset) for about 2 seconds. To turn it off, press and hold the power button for about 3 seconds until the screen turns off. The Ray90/Ray91 base station must be powered on for the cordless handset to function.

You can change the transmit power between High (25 W) and Low (1 W) by pressing the HI/LO button on the wireless handset. This allows you to adjust the transmission range according to your needs and regulations.

To make a DSC distress call, lift the spring-loaded cover and press the dedicated DISTRESS button on the wireless handset. This action will send a digital distress signal, so it is crucial to use this function only in a real emergency.

Yes, the maximum voice transmission duration is limited to 5 minutes per Push-To-Talk (PTT) button activation. This measure is implemented to prevent accidental transmissions that could occupy a VHF channel for an extended period.

The wireless handset has Volume Up and Volume Down buttons to adjust the audio level. To switch between volume control and squelch control, press the VOL/SQ button. Once in squelch mode, use the Volume Up/Down buttons to adjust the squelch intensity.

Yes, Raymarine recommends installation by a certified installer. Certified installation may qualify for enhanced warranty benefits for the product. It is advised to contact your Raymarine dealer for further details.

No, although this product meets a water ingress protection standard, Raymarine does not guarantee products subjected to high-pressure washing. Water intrusion and equipment failure can occur if the product is exposed to high-pressure washing.