Balíček i70 s krátkým stožárovým prvkem, průchozími sondami Rychlost/Tepelná hloubka ST900/P120 & P319

This pack is designed to provide critical navigation data. It allows simultaneous monitoring of:

Wind strength and direction.The boat's speed.Water temperature.Depth under the keel.

The i70 display stands out from dedicated monochrome screens such as the Raymarine i50 (speed/depth) or i60 (wind) due to its versatility and color display. It can centralize and display multiple types of data on a single screen, providing improved readability and the ability to customize views.

Yes, the i70 color display allows you to customize views. This enables sailors to display the most relevant data based on sailing conditions and their preferences.

The ST900/P120 through-hull transducers (speed/temperature) and P319 (depth) are technical choices that ensure direct and stable measurements from the hull. This setup minimizes disturbances and provides superior reliability compared to transom-mounted sensors.

The short masthead unit is included and optimized for sailboats where a compact sensor is preferred. It offers a good balance between wind measurement accuracy and installation discretion.

Yes, the Raymarine i70 (T70586) pack is a complete instrumentation solution specifically designed for sailboats.

The pack is designed as a complete solution and includes the components required for data acquisition and display, which involves standard connection cables for sensors and the display to the SeaTalkng/NMEA 2000 network.

Yes, the i70 display is a multifunction display that can show various data from other sensors or equipment connected to the same SeaTalkng/NMEA 2000 network, beyond speed, temperature, depth and wind provided by the pack’s transducers.

The i70 display uses a color screen, providing enhanced readability of navigation data.

The i70 pack provides essential data such as wind, speed, temperature, and depth, which are crucial for all types of navigation, whether coastal or offshore, on a sailboat.

Yes, thanks to its integration in a SeaTalkng/NMEA 2000 network, the i70 system is compatible with other Raymarine equipment, including autopilots, enabling unified navigation data management.

Yes, this configuration is designed to integrate into a SeaTalkng/NMEA 2000 network. This ensures compatibility with other Raymarine equipment, such as Axiom or eS Series chartplotters, for unified navigation data management.

The i70 system integrates into a SeaTalkng/NMEA 2000 network. It is a standard communication protocol in the marine industry that allows onboard devices to exchange data.

The i70 system uses the NMEA 2000 network (via SeaTalkng). If your chartplotter from another brand is also NMEA 2000 compatible, data exchange is possible. However, full feature compatibility may vary depending on brands and models.

Raymarine equipment, including the i70 display, typically includes firmware that can be updated to improve performance or add new features. Updates are usually available via the manufacturer's website.

Installing through-hull transducers requires drilling holes in the boat's hull and ensuring perfect watertightness. This demands marine DIY skills and potentially professional intervention to guarantee a correct and secure installation.

The masthead wind transducer must be installed at the top of the sailboat's mast. This position ensures undisturbed measurement of wind speed and direction, away from deck obstacles.

The i70 display is a dashboard instrument. Installation requires a clear, accessible mounting location, typically in the cockpit or at the chart table, considering visibility and protection from the elements. Ensure there is sufficient space behind the panel for connections and wiring.

Connection of components to the SeaTalkng/NMEA 2000 network is done via specific cables and connectors (typically backbone cables and spur cables). Each device (i70 display, wind transducer, depth sounders) connects to the main network, which provides power and enables data exchange between all compatible devices.