Kabel napájení SeaTalk NG

The Raymarine A06049 cable is an essential component designed to supply power to the SeaTalkng network. It ensures the distribution of the necessary energy to all Raymarine instruments and sensors connected to the SeaTalkng backbone, guaranteeing their proper operation and the stability of the network.

The SeaTalkng power cable A06049 is easily identifiable by its red color band. This marking allows it to be distinguished from backbone cables (blue) and spur cables (white) within the SeaTalkng network, which are dedicated to data transmission.

The SeaTalkng network is typically powered by a 12-volt direct current (12V DC) source. The A06049 cable is designed to connect to this power source and distribute the 12V DC to the network backbone.

The A06049 power cable is fitted with a standard 5-pin SeaTalkng connector on one end, which plugs directly into the network backbone. The other end typically consists of stripped wires for a secure connection to the boat's power source.

Yes, cable A06049 is a proprietary Raymarine product designed specifically for use with the brand’s SeaTalkng network systems. It ensures optimal integration and performance within this ecosystem.

Yes, like all Raymarine products intended for marine use, the A06049 cable is designed to withstand the demanding conditions of the marine environment, including humidity, temperature variations, and vibrations. Its construction ensures long-term reliability on board.

The A06049 cable is a standard power cable. Its length is typically short, sufficient to connect the SeaTalkng backbone to a nearby power source. Specific lengths may vary depending on versions or kits, but the A06049 model is the basic power cable.

No, the Raymarine A06049 cable itself does not include any built-in fuse or electrical protection. It is essential to install appropriate protection (fuse or circuit breaker) on the power circuit before connecting the cable to the power source, in accordance with the SeaTalkng manual recommendations.

Cable A06049 is neither a backbone cable (blue) nor a drop cable (white). It is a dedicated power cable, identifiable by its red stripe, which connects to the SeaTalkng backbone to supply it with the necessary power.

The A06049 power cable must be connected directly to the SeaTalkng backbone. The backbone acts as the system’s backbone, distributing power and data to all connected instruments.

Yes, using the A06049 power cable does not eliminate the need to install terminators. Two terminators are absolutely required, one at each end of the SeaTalkng backbone cable, to ensure proper data transmission and stable network operation.

When installing cable A06049, it is critical to consider:

The total load of devices connected to the SeaTalkng network.The available power source (typically 12V DC).Installing adequate electrical protection (fuse or circuit breaker) on the power circuit.The positioning of the power connection point to ensure balanced system performance if the network is extended.These precautions are detailed in the SeaTalkng reference manual.

It is strongly advised against cutting or extending the part of A06049 cable that includes the SeaTalkng connector, as this could compromise signal and power integrity. The section of bare wires intended for connection to the power source can be carefully adjusted if necessary, while complying with electrical standards and ensuring a secure connection.

Yes, for electrical safety reasons, it is imperative to ensure that the boat's main power supply is cut off before starting the installation of cable A06049 or any other connection to the SeaTalkng network. This prevents any risk of electric shock or damage to the equipment.

The A06049 power cable is specifically designed for Raymarine's SeaTalkng network. While SeaTalkng is compatible with NMEA 2000 via specific adapter cables for data transmission, the A06049 cable itself does not directly connect to a NMEA 2000 network for power. It powers the SeaTalkng backbone, which can then exchange data with NMEA 2000.

The A06049 cable is designed to power the SeaTalkng network. To connect and potentially power SeaTalk(1) devices via a SeaTalkng network, Raymarine gateway products (such as certain ST70 instruments) and specific adapter cables must be used. The A06049 cable does not provide direct power to SeaTalk(1) devices.

Yes, the A06049 power cable is a standard component of the SeaTalkng system and is compatible with all Raymarine instruments designed to connect to a SeaTalkng network. It supplies power to the backbone, enabling all connected devices to operate.

No, cable A06049 is a proprietary component of the Raymarine SeaTalkng system. It is designed specifically to integrate with this network architecture and is not compatible for direct use with products or networks from other brands, even if they use similar protocols like NMEA 2000.