Odbočka SeaTalk NG délka 3 metry odizolované

A bare SeaTalkng spur is a SeaTalkng branch cable (also called a "spur") in the Raymarine SeaTalkng system. Its key feature is having one end unconnected, with exposed wires, allowing custom connections to terminal blocks, specific power supplies, or integration of devices without a standard SeaTalkng connector.

This SeaTalkng branch cable is 3 meters long.

The stripped end of this cable is designed for installations requiring a direct connection to terminal blocks, specific power supplies, or the integration of devices not equipped with a standard SeaTalkng connector. It provides flexibility for custom wiring.

This cable is a branch, also called a spur cable, designed to connect individual devices to the main SeaTalkng backbone.

The SeaTalkng spur cables are white.

The SeaTalkng system uses small-diameter connectors to simplify installation.

Since this cable has a stripped end, it will require basic wiring tools (such as a wire stripper, screwdriver for terminal blocks, etc.) to make custom connections. The SeaTalkng reference manual lists the tools required for general system installation.

The SeaTalkng system is Raymarine's proprietary interconnect bus, designed to link Raymarine products together via a main backbone and spur cables, facilitating data transmission and power supply.

The SeaTalkng system is structured around a main backbone to which Raymarine products are connected via spur cables. The backbone must be terminated at each end with specific terminators.

The SeaTalkng system is designed to provide a wide range of cable lengths to avoid the need for cutting and splicing standard cables. However, the exposed end of this cable is specifically intended for custom connections, which involves handling the wires. Any modification beyond the intended use of the exposed end must be carried out with caution to ensure the integrity of the network.

Yes, it is essential to install a terminator at each end of the SeaTalkng backbone cable to ensure correct data transmission. Failing to terminate the system properly may compromise its operation.

The power supply must be connected to the SeaTalkng backbone. The SeaTalkng reference manual provides detailed guidelines on power considerations, including connection points and allowable load for a balanced or unbalanced system.

Yes, the SeaTalkng reference manual includes EMC (Electromagnetic Compatibility) installation guidelines for cable routing to ensure system performance is not compromised. It is recommended to follow these guidelines for optimal installation.

Yes, the stripped end of this cable can be used for power connection, including for specific power supplies or terminal blocks, while following the appropriate SeaTalkng wiring diagrams.

Yes, the SeaTalkng system is designed to power multiple devices via the backbone. However, it is crucial to consider the total load of connected products and the power limits of the system, as detailed in the SeaTalkng reference manual, to avoid overloading.

Yes, Raymarine ST70 products are designed to connect to the SeaTalkng system via spur cables. This cable, being a SeaTalkng branch, is compatible with the integration of these instruments.

This cable is a SeaTalkng branch. To connect NMEA2000 products to the SeaTalkng system, specific adapter cables are required, as stated in the SeaTalkng reference manual. This bare cable can be used for custom connections, but NMEA2000 integration requires an adapter.

To connect SeaTalk products (referred to as "SeaTalk(1)" in the documentation) to a SeaTalkng system, appropriate adapter cables are required. This bare cable can be used for custom connections, but SeaTalk(1) integration requires an adapter.

This cable is a component of Raymarine's proprietary SeaTalkng system. While the stripped end allows for flexible wiring, compatibility with other marine equipment brands will depend on their ability to interface with the SeaTalkng protocol, often via NMEA 2000 adapters or custom solutions.