Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 12%

Raymarine

A80465

Bronzová průchozí sonda 0° RV-200 RealVision 3D, přímé připojení k AXIOM (kabel 8 m)

Conçue pour les écrans Raymarine Axiom, la sonde traversante RV-200 RealVision 3D en bronze offre une imagerie sous-marine détaillée (DownVision, SideVision, RealVision 3D). Son inclinaison de 0° est adaptée aux coques à faible ou sans inclinaison. Le produit inclut la sonde avec un câble intégré de 8m et une vis de fixation en bronze M8 x 100mm pour l'alignement.

Prix publicBénéficier du tarif pro

27.510,24 CZK

27.510,24 CZK ~~31.272,49 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Podporované technologie sonaru	RealVision 3D,DownVision,SideVision
Provozní napětí	12 V DC
Frekvence sonaru	200 kHz (CHIRP Conique), 350 kHz (RealVision 3D, DownVision, SideVision)
Provozní teplota	-25 à +55
Maximální hloubka odečtu	91.0
Materiál sondy	Bronze
Typ konektoru sonaru	Raymarine RealVision 3D (25 broches)
Délka kabelu	8.0
Integrovaný teplotní čidlo	Oui
Kompatibilní zobrazovače	Raymarine Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL, Axiom 2 XL
Typ montáže	Traversante
Certifikace	CE
Úhlové pokrytí paprskem	180
Vysoká frekvence CHIRP	420
Nízká frekvence CHIRP	350
Typ rybolovu	Mer, Lac, Traîne, Verticale
Integrovaný snímač rychlosti	Non

Accessoires

Kabel 1,5 m SeaTalk NG SPUR F / konektor Devicenet NMEA 2000 M

1.085,74 CZK

1.085,74 CZK ~~1.197,03 CZK~~

Koupit

Kabel 1 metr SeaTalk NG F / DeviceNet (NMEA 2000) F)

1.356,80 CZK

1.356,80 CZK ~~1.496,29 CZK~~

Koupit

Câble Adaptateur Femelle Devicenetraymarine A06045

Adaptér STNG – kabel k hlavní sběrnici, samice STNG → samice DeviceNet, 400 mm

1.035,78 CZK

1.035,78 CZK ~~1.197,03 CZK~~

Koupit

Kabel SeaTalk NG / Devicenet NMEA2000 samice (400 mm)

1.221,02 CZK

1.221,02 CZK ~~1.346,66 CZK~~

Koupit

Kabel SeaTalk NG 1 metr (odbočka)

1.037,02 CZK

1.037,02 CZK ~~1.197,03 CZK~~

Koupit

T-konektor SeaTalk NG

688,54 CZK

688,54 CZK ~~748,15 CZK~~

Koupit

5cestný konektor SeaTalk NG

1.156,23 CZK

1.156,23 CZK ~~1.197,03 CZK~~

Koupit

Transpondeur AIS700 Raymarine – Classe B avec répartiteur VHF i

AIS 700 Třída B s integrovaným splitterem antény

32.559,30 CZK

32.559,30 CZK ~~35.761,36 CZK~~

Koupit

Description détaillée

Určena pro přímou integraci s multifunkčními displeji Raymarine Axiom, průchozí sonda RV-200 RealVision 3D z bronzu představuje pokročilé řešení pro podvodní detekci. Tento snímač využívá technologii RealVision 3D k poskytování detailního zobrazení podvodního světa včetně struktur, mořského dna a ryb. Je kompatibilní s funkcemi DownVision a SideVision, což umožňuje komplexní průzkum pod a po stranách lodi.

Konstrukce a umístění

RV-200 se vyznačuje konstrukcí z bronzu, díky čemuž je vhodná pro trupy z laminátu nebo dřeva a nabízí vyšší odolnost v náročných mořských podmínkách. Díky sklonu 0° je tato sonda navržena speciálně pro trupy s nízkým nebo žádným sklonem (deadrise), čímž zajišťuje sonarový paprsek kolmý na mořské dno pro optimální výkon. Integruje se přímo do systémů Axiom, jako jsou modely Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL a Axiom 2 XL, což zjednodušuje instalaci a konfiguraci.

Integrace a technické specifikace

Integrovaný kabel o délce 8 metrů umožňuje snímači RV-200 přímé připojení ke kompatibilním displejům Axiom, čímž odpadá potřeba externího sonarového modulu. Tato konfigurace zajišťuje rychlý přenos dat a plynulé uživatelské rozhraní prostřednictvím softwaru LightHouse 4. Systém upevnění zahrnuje bronzový šroub s šestihrannou hlavou M8 x 100 mm pro zarovnání, což zaručuje stabilnou a přesnou instalaci. Na rozdíl od sérií RV-3xx z plastu či RV-4xx z nerezové oceli je RV-200 z bronzu určena pro uživatele vyžadující vyšší robustnost a spolehlivý výkon v různých podmínkách, aniž by byla ohrožena kvalita zobrazení RealVision 3D.

Documentations

Type	Nom
	EN - Technical drawing - Bronze through-hull 0° RV-200 RealVision 3D, direct Axiom connection (8m cable)
	EN - User Manual - Bronze Thru-Hull 0° RV-200 RealVision 3D, Direct AXIOM Connection (8m Cable)
	EN - Technical drawing - Bronze through-hull 0° RV-200 RealVision 3D, direct Axiom connection (8m cable)
	EN - Technical drawing - Bronze through-hull transducer 0° RV-200 RealVision 3D, direct connection AXIOM (8m cable)
	EN - Technical Drawing - Bronze 0° Through-Hull RV-200 RealVision 3D, Direct AXIOM Connection (8m Cable)
	EN - Technical Drawing - Bronze 0° Through-Hull Sonar RV-200 RealVision 3D, Direct Connection to AXIOM (8m Cable)
	EN - Technical Drawing - Bronze Through-Hull 0° RV-200 RealVision 3D, Direct Connection AXIOM (8m Cable)
	EN - Technical Drawing - Bronze Through-Hull 0° RV-200 RealVision 3D Transducer, Direct Connection to AXIOM (8m Cable)
	EN - Technical drawing - Bronze 0° RV-200 RealVision 3D through-hull transducer, direct connection AXIOM (8m cable)

Avis de l'expert

Pol CONIN

Digitální manažer

« Technical analysis: Raymarine RV-200 RealVision 3D through-hull transducer for Axiom »

The Raymarine RV-200 RealVision 3D through-hull transducer is a strategic choice for recreational boaters and anglers equipped with an Axiom multifunction display and whose vessel has a hull with low or zero deadrise. Its bronze construction is designed for permanent installations where robustness and corrosion resistance are critical, particularly in saltwater or high-marine-activity areas. The RealVision 3D technology is especially valued for detailed seabed mapping and precise detection of submerged structures, providing a clear advantage for sport fishing or navigation in complex waters.

The main advantage of this transducer lies in its direct connection to Axiom displays, which significantly simplifies system architecture by eliminating the need for an external sonar module. This not only reduces overall cost and footprint but also potential failure points. The through-hull installation requires expertise for hull drilling and sealing, but the 0° tilt facilitates alignment on flat hulls. It is crucial to ensure the boat meets this hull angle requirement to maximize sonar beam performance.

While bronze offers excellent durability, it is important to note that this transducer is not recommended for aluminum hulls without specific precautions to prevent galvanic corrosion. For hulls with more pronounced deadrise, it would be preferable to choose transducers with a tilted element (12° or 20°) to compensate for the hull angle and ensure optimal sonar coverage. The RV-200 is therefore a targeted, high-performance, and integrated solution, ideal for applications where a 0° bronze through-hull transducer is technically justified.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Bronzová průchozí sonda 0° RV-200 RealVision 3D, přímé připojení k AXIOM (kabel 8 m)

27.510,24 CZK

27.510,24 CZK ~~31.272,49 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the main function of the Raymarine RV-200 RealVision 3D fishfinder?

The RV-200 RealVision 3D sounder is designed to provide advanced and detailed underwater imaging. It uses RealVision 3D technology to display structures, the seabed, and fish with exceptional clarity. Additionally, it integrates DownVision and SideVision functions for complete exploration beneath and alongside your vessel.

Which Raymarine multifunction displays is the RV-200 transducer compatible with?

The RV-200 transducer is designed for direct integration with Raymarine multifunction displays from the Axiom family. It is compatible with the following models:

Raymarine AxiomRaymarine Axiom+Raymarine Axiom ProRaymarine Axiom 2 ProRaymarine Axiom XLRaymarine Axiom 2 XL

For which hull type is the RV-200 0° depth sounder specifically designed?

The RV-200 transducer with a 0° tilt is specifically designed for hulls with little or no deadrise. This design ensures a sonar beam perpendicular to the seabed, guaranteeing optimal imaging performance. It is suitable for fiberglass or wooden hulls.

What is the RV-200 depth sounder made of and what are its advantages?

The RV-200 transducer is made of bronze. This material provides superior durability and increased robustness, making it particularly suitable for demanding marine environments and fiberglass or wooden hulls.

Does the RV-200 transducer require an external sonar module to work with an Axiom display?

No, the RV-200 transducer is designed for direct connection to compatible Raymarine Axiom displays. Its integrated 8-meter cable allows the transducer to be connected directly to the display, eliminating the need for an external sonar module. This setup simplifies installation and ensures fast data transmission.

How is the RV-200 transducer mounted to the boat hull?

The RV-200 transducer is mounted to the hull using a robust mounting system. This includes an M8 x 100mm bronze hex-head screw designed to ensure stable and precise alignment of the transducer.

Which sonar technologies are integrated in the RV-200 sounder?

The RV-200 sounder integrates several advanced Raymarine sonar technologies for a complete underwater view:

RealVision 3D: For a detailed three-dimensional representation of the seabed and structures.
DownVision: For a photorealistic view of the underwater world beneath the boat.
SideVision: For a clear side view of structures and fish on the sides of the boat.

Is specific calibration required after installing the RV-200 transducer?

Yes, after installing the RV-200 transducer, a RealVision™ AHRS (Attitude and Heading Reference System) calibration is recommended. This calibration is essential to ensure the accuracy and optimal quality of RealVision 3D imaging, by ensuring the transducer correctly compensates for boat movements.