Sonde sondeur traversante ou à coller 50mm

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 8%

Raymarine

T905

Sonda sondu hloubkoměr průchozí nebo lepicí 50 mm

Conçu pour intégrer les données de vos sondes de profondeur, vitesse et température, l'émetteur de coque Raymarine T905 (SKU T905) assure une connexion fiable au système de bord. Compatible avec une alimentation 12/24Vdc, il est destiné à une installation verticale dans un environnement ventilé, à l'abri de l'eau. Le kit inclut les vis auto-foreuses nécessaires à la fixation.

Prix publicBénéficier du tarif pro

3.697,69 CZK

3.697,69 CZK ~~4.039,99 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Podporované technologie sonaru	Sondeur analogique (profondeur, vitesse, température)
Provozní napětí	12/24 Vdc
Typ konektoru sonaru	Fils nus / Bornier à vis
Šířka produktu	52.5 mm
Výška produktu	90 mm
Hloubka produktu	42.5 mm
Stupeň krytí IP	Non applicable (doit être monté au-dessus de la ligne de flottaison)
Kompatibilita sběrnice	Analogique
Bezdrátová konektivita	Non
Typ montáže	Montage mural / Vertical
Integrovaný snímač rychlosti	Non
Integrovaný teplotní čidlo	Non

Accessoires

Kabel 1,5 m SeaTalk NG SPUR F / konektor Devicenet NMEA 2000 M

1.085,74 CZK

1.085,74 CZK ~~1.197,03 CZK~~

Koupit

Kabel 1 metr SeaTalk NG F / DeviceNet (NMEA 2000) F)

1.356,80 CZK

1.356,80 CZK ~~1.496,29 CZK~~

Koupit

Câble Adaptateur Femelle Devicenetraymarine A06045

Adaptér STNG – kabel k hlavní sběrnici, samice STNG → samice DeviceNet, 400 mm

1.035,78 CZK

1.035,78 CZK ~~1.197,03 CZK~~

Koupit

Kabel SeaTalk NG / Devicenet NMEA2000 samice (400 mm)

1.221,02 CZK

1.221,02 CZK ~~1.346,66 CZK~~

Koupit

Kabel SeaTalk NG 1 metr (odbočka)

1.037,02 CZK

1.037,02 CZK ~~1.197,03 CZK~~

Koupit

T-konektor SeaTalk NG

688,54 CZK

688,54 CZK ~~748,15 CZK~~

Koupit

5cestný konektor SeaTalk NG

1.156,23 CZK

1.156,23 CZK ~~1.197,03 CZK~~

Koupit

Nalepovací sonda s kuželovým paprskem HIGH CHIRP, úhel 0/12/20°, CPT-S, kabel 6 m

4.471,31 CZK

4.471,31 CZK ~~4.937,76 CZK~~

Koupit

Rallonge Raymarine A80273 4 m pour sondes CPT-S, CPT100, CPT110 et CPT120

4m prodlužovací kabel pro sondy CPT-S, CPT100, CPT110 & CPT120

1.203,71 CZK

1.203,71 CZK ~~1.346,66 CZK~~

Koupit

Description détaillée

Určený pro systémy námořní navigace, snímač na trup Raymarine T905 zajišťuje přenos dat z vašich sond hloubky, rychlosti a teploty. Tento modul je nezbytný pro centralizaci informací z vodičových snímačů do palubní instrumentace a poskytuje řešení pro integraci různých konfigurací čidel.

Instalace a konektivita T905

Instalace snímače T905 vyžaduje vertikální montáž minimálně 50 cm nad čárou ponoru, v dobře větraném prostoru a bez přímého kontaktu s vodou. Nesmí být umístěn v neprodyšném prostoru. Napájení je 12/24 Vss a lze jej také napájet solárním panelem Raymarine. Připojení kabelů snímačů se provádí podle přesného barevného kódování s konkrétními pokyny pro Triducery (zem musí být připojena na konektor hloubky) a pro snímače rychlosti bez snímače teploty (spojení mezi hnědými a bílými svorkami).

Integrace dat ze sond

T905 umožňuje sloučit signály z oddělených sond (hloubka, rychlost, teplota) do jediného bodu. Vyžaduje aplikaci silikonového tuku na kontakty pro zajištění spolehlivosti spojů. Kryt pouzdra zajišťuje uchycení a ochranu vnějších plášťů kabelů. Tento typ snímače se často používá v systémech, kde je upřednostňována flexibilita integrace stávajících sond před použitím "vše-v-jednom" snímačů nebo přímých systémů NMEA 2000, jak lze vidět u novějších produktů řady Axiom od Raymarine nebo jiných značek jako Garmin či B&G.

Documentations

Type	Nom
	EN - Mounting template - Thru-hull or adhesive 50mm transducer
	EN - Installation Manual - 50mm Through-Hull or Adhesive Transducer
	EN - User Manual - Through-hull or adhesive 50mm transducer
	EN - User Manual - Through-hull or Adhesive Mount 50mm Depth Sounder Transducer
	EN - User Manual - 50mm Through-Hull or Adhesive Transducer
	EN - User Manual - Thru-hull or adhesive 50mm transducer
	EN - User Manual - Through-hull or adhesive 50mm transducer

Avis de l'expert

Pol CONIN

Digitální manažer

« Integrating wired transducers via the Raymarine T905 hull transmitter »

The Raymarine T905 hull transmitter is a key component for integrating existing or specific wired transducers into a boat instrumentation network. Its practical value lies in its ability to bridge classic depth, speed, and temperature transducers with the display system, often within a wireless architecture (such as Raymarine's Tacktick/Micronet systems). This is particularly relevant for sailboats where minimizing wiring and installation flexibility are assets.

For optimal installation, it is imperative to follow mounting guidelines: vertically, at least 50 cm above the waterline, and in a ventilated environment, protected from direct water contact. This is not a submersible device or intended for a sealed compartment. The 12/24Vdc power supply is standard, with the option to use a Raymarine solar panel for isolated installations.

The T905 stands out for its role as a converter and transmitter for wired transducers, offering an alternative to directly NMEA 2000-compatible or wireless transducers. It is ideal for those who want to retain existing high-performance transducers or face cable routing constraints. It is crucial to note the specific wiring requirements for Triducers and speed transducers without temperature sensors to ensure correct operation. This module is not a transducer itself, but the core that interprets and transmits signals from your sensors.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Sonda sondu hloubkoměr průchozí nebo lepicí 50 mm

3.697,69 CZK

3.697,69 CZK ~~4.039,99 CZK~~

Complétez votre installation avec des

Équipements complémentaires

Raymarine

Displej i50 Depth sonaru

Ref : E70059

12.832,00 CZK

12.832,00 CZK ~~14.813,28 CZK~~

Raymarine

Displej i50 Speed

Ref : E70058

13.779,98 CZK

13.779,98 CZK ~~14.813,28 CZK~~

Raymarine

Digitální zobrazovač i50 Tridata

Ref : E70060

14.146,26 CZK

14.146,26 CZK ~~16.309,58 CZK~~

Raymarine

Displej i70s multifunkční

Ref : E70327

16.908,09 CZK

16.908,09 CZK ~~17.805,87 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What are the mounting requirements for the T905 transducer?

For correct installation, the T905 must be mounted vertically in a well-ventilated space and at least 50 cm above the waterline. It is crucial to avoid any direct contact with water.

At what height above the waterline should the T905 be mounted?

The T905 transducer must be mounted at least 50 cm above the waterline to ensure proper operation and prevent direct contact with water.

Can the T905 be installed in a watertight compartment?

No, it is imperative NOT to install the T905 in a watertight compartment. It must be installed in a well-ventilated area.

In which orientation should the T905 transducer be mounted?

The T905 must be mounted vertically, with the cables exiting from the bottom of the unit. It is important to note that the mounting template must be inverted relative to the transducer itself.

How to mount the T905 on the boat?

To mount the T905, you must drill three 2.5 mm holes at the positions marked "B" on the mounting template. The transducer is then secured using the provided self-tapping screws. Do not overtighten the screws to avoid damaging the housing.

What is the procedure for connecting the transducer cables to the T905?

Connecting the transducers' cables to the T905 follows the color coding indicated on the unit. It is essential to sleeve the cable shields to prevent any short circuit. Once connected, apply silicone grease to the contacts.

Is there a specific guideline for wiring a Triducer with the T905?

Yes, for a Triducer, the ground braid (the shielding) must be connected to the depth connector and NOT to the speed connector.

How to connect a speed sensor without a temperature sensor to the T905?

If your speed transducer does not have an integrated temperature sensor, you must connect the brown and white wires of the speed connector with a jumper to ensure proper data transmission.

Should silicone grease be applied to the T905 contacts?

Yes, it is recommended to apply silicone grease to the terminal contacts after connecting the transducer cables. This helps ensure the reliability of the connections.

How to ensure cable protection after connection to the T905?

After connecting the cables, it is important to support them near the transducer. Then ensure the housing cover is properly fitted, as it is designed to hold and protect the outer cable sleeves inside the transducer.

With which types of systems is the T905 designed to work?

The T905 is designed to work with marine navigation systems that require the centralization of data from wired transducers (depth, speed, temperature) to the onboard instrumentation. It is a solution for integrating existing sensors.

Is the T905 an alternative to direct NMEA 2000 systems?

Yes, the T905 is often used in setups where flexible integration of existing transducers is preferred over "all-in-one" transducers or direct NMEA 2000 systems. It provides a different method for sensor data integration.