Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 3%

Raymarine

A80703

Sonda panelová RVM-100 RealVision 3D, přímé připojení k AXIOM2 Pro a RVM1600 (kabel 8 m)

La sonde tableau Raymarine RVM-100 RealVision 3D (A80703) offre une imagerie sonar avancée avec des vues 3D, DownVision et SideVision. Conçue pour une connexion directe aux écrans AXIOM2 Pro et aux modules RVM1600, elle simplifie l'intégration du système. Le produit inclut la sonde RVM-100 avec un câble de 8 mètres.

Prix publicBénéficier du tarif pro

17.150,22 CZK

17.150,22 CZK ~~17.805,87 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Podporované technologie sonaru	RealVision Max 3D, DownVision, SideVision, CHIRP large spectre
Provozní napětí	12V DC
Frekvence sonaru	CHIRP conique haute fréquence (200 kHz ± 5%), RealVision 3D (350 kHz ± 5%), SideVision (350 kHz ± 5%), DownVision (350 kHz ± 5%)
Provozní teplota	-20°C à +70°C
Maximální hloubka odečtu	365.0
Materiál sondy	Plastique
Typ konektoru sonaru	25 broches RealVision
Délka kabelu	8.0
Integrovaný teplotní čidlo	Oui
Kompatibilní zobrazovače	Axiom, Axiom+, Axiom Pro, Axiom XL, Axiom 2 Pro, Axiom 2 XL, RVX1000, RVM1600
Stupeň krytí IP	IPx6, IPx7, IPx8
Typ montáže	Tableau arrière
Certifikace	EN 60945:2002, IEC 28846:1993, EMC Directive 2014/30/EU, C-Tick (Australie et Nouvelle-Zélande)
Úhlové pokrytí paprskem	CHIRP conique: 12° (200 kHz), 3D/SideVision: 180°
Vysoká frekvence CHIRP	200 kHz
Typ rybolovu	Pêche générale, Pêche de structure
Integrovaný snímač rychlosti	Non

Description détaillée

Sonda panelová RVM-100 RealVision 3D od společnosti Raymarine (číslo dílu A80703) je navržena pro přímou integraci s multifunkčními displeji AXIOM2 Pro a sondujícími moduly RVM1600. Poskytuje pokročilé zobrazování sonarového signálu. Tato sonda umožňuje uživatelům sledovat podmořské struktury a hejna ryb s trojrozměrnou vizualizací mořského dna, čímž doplňuje tradiční pohledy DownVision a SideVision.

Pokročilá sonarová technologie a zjednodušená integrace

Sonda RVM-100 využívá technologii RealVision 3D, která se odlišuje od 2D CHIRP sond nebo starších modelů jako série CPT (pouze DownVision/SideVision) svou schopností generovat objemový obraz mořského dna. Tato funkce poskytuje lepší prostorové porozumění podmořskému prostředí. Přímé připojení k jednotkám AXIOM2 Pro, které mají integrované sonarové schopnosti RealVision, nebo k externímu modulu RVM1600, zjednodušuje instalaci tím, že odpadá potřeba dalších černých sonarových skříní pro kompatibilní konfigurace. Dodávaný 8metrový kabel usnadňuje montáž na zadní panel různých typů plavidel.

Umístění a kompatibilita

Sonda RVM-100 patří do řady RealVision transduktorů Raymarine a nabízí řešení pro montáž na zadní panel pro moderní navigační systémy. Je optimalizována pro práci s softwarem LightHouse 4 (ve verzi v4.10.149 uvedené v dokumentaci) a zajišťuje kompatibilitu s displeji Axiom, Axiom+, Axiom Pro, Axiom XL a Axiom 2 XL. Ve srovnání s průchozími transduktory série RVM-400 poskytuje sonda RVM-100 přístupnější a méně invazivní montážní možnost pro lodě, kde je vrtání do trupu nežádoucí, přičemž si zachovává schopnosti zobrazování RealVision 3D. Kalibrace AHRS (Attitude and Heading Reference System) je podporována pro optimalizaci kvality 3D obrazu kompenzací pohybu lodi.

Documentations

Type	Nom
	EN - User Manual - RVM-100 RealVision 3D Display Sonar, Direct Connection AXIOM2 Pro and RVM1600 (8m Cable)
	EN - Technical diagram - Sonde Tableau RVM-100 RealVision 3D, direct connection AXIOM2 Pro and RVM1600 (8 m cable)
	EN - Technical Drawing - RVM-100 RealVision 3D Table Sonar, Direct Connection to AXIOM2 Pro and RVM1600 (8m Cable)
	EN - Technical drawing - RVM-100 RealVision 3D Sonar Display, direct connection AXIOM2 Pro and RVM1600 (8m cable)
	EN - Technical drawing - RVM-100 RealVision 3D Tablet Sonar, direct connection AXIOM2 Pro and RVM1600 (8m cable)
	EN - Technical drawing - RVM-100 RealVision 3D Chartplotter, direct connection AXIOM2 Pro and RVM1600 (8m cable)

Avis de l'expert

Pol CONIN

Digitální manažer

« Technical analysis of the Raymarine RVM-100 RealVision 3D panel-mounted transducer »

The RVM-100 RealVision 3D flush-mount transducer (A80703) from Raymarine is a key component for recreational boaters and anglers seeking detailed underwater visualization without the complexity of a through-hull installation. Its practical value lies in its ability to provide RealVision 3D, DownVision, and SideVision images directly integrated with Axiom 2 Pro MFDs or via the RVM1600 module. This approach significantly simplifies system architecture by reducing the number of external enclosures, a notable advantage for mid-sized boats where space is often limited and wiring simplification is critical.

For installation, mounting on the transom is generally faster and less expensive than a through-hull setup. The 8-meter cable provided is sufficient for most boats under 10-12 meters, though an extension may be required for larger units or complex installations. It is crucial to select a transom location that minimizes water turbulence to ensure optimal image quality, particularly at high speeds. AHRS calibration is a mandatory post-installation step to ensure 3D representation accuracy by compensating for the boat’s pitch and roll.

The RVM-100 differentiates itself from standard transducers with native 3D imaging, offering a unique perspective for identifying structures and fish schools. It is particularly well-suited for sportfishing boats or coastal cruisers where precise knowledge of underwater terrain is an asset. However, for offshore applications or very high-speed vessels, a through-hull transducer from the RVM-400 series may deliver better performance and water stability.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Sonda panelová RVM-100 RealVision 3D, přímé připojení k AXIOM2 Pro a RVM1600 (kabel 8 m)

17.150,22 CZK

17.150,22 CZK ~~17.805,87 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

Which sonar technology does the Raymarine RVM-100 RealVision 3D sounder use?

The RVM-100 transducer integrates RealVision 3D technology, enabling a three-dimensional representation of the seabed. It also complements traditional DownVision and SideVision views, as well as the high-frequency CHIRP sonar for precise target detection.

Which Raymarine multifunction displays is the RVM-100 transducer compatible with?

The RVM-100 transducer is compatible with Raymarine multifunction displays from the following series:

AxiomAxiom+Axiom ProAxiom XLAxiom 2 XLAXIOM2 ProIt is optimized to work with LightHouse 4 software (v4.10.149 or later recommended).

How does the RVM-100 transducer connect to my Raymarine navigation system?

The RVM-100 transducer is designed for direct connection. It connects directly to AXIOM2 Pro multifunction displays, which have integrated RealVision sonar capabilities. For other compatible Axiom displays, the transducer connects directly to the RVM1600 external sounder module.

What is the mounting type for the RVM-100 RealVision 3D fishfinder/transducer?

The RVM-100 transducer is a transom-mount transducer. This mounting type is an accessible and less intrusive option for boats where hull drilling should be avoided, while retaining RealVision 3D imaging capabilities.

What is the length of the cable supplied with the RVM-100 depth sounder?

The RVM-100 transducer is supplied with an 8-metre cable. This length is designed to facilitate installation on the transom of various types of vessels.

Does the RVM-100 transducer require an external fishfinder module (black box)?

No, the RVM-100 transducer does not require an additional black sonar housing if you connect it to an AXIOM2 Pro multifunction display, as these units already include RealVision sonar capabilities. If you are using another compatible Axiom display, the transducer connects directly to the RVM1600 external sounder module.

Does the RVM-100 transducer support AHRS calibration?

Yes, the RVM-100 transducer supports AHRS (Attitude and Heading Reference System) calibration for RealVision technology. This calibration is important for stabilizing the sonar image and compensating for boat movements, providing a more accurate representation of the seabed.

What are the main imaging capabilities offered by the RVM-100 RealVision 3D fishfinder?

The RVM-100 RealVision 3D sounder offers several advanced imaging capabilities for a better understanding of the underwater environment:

RealVision 3D: Generates a volumetric three-dimensional image of the seabed, structures, and fish schools.DownVision: Provides a detailed view beneath the boat, similar to a photographic image.SideVision: Offers a side view of structures and fish on either side of the boat.High-frequency CHIRP sonar: Enables precise target detection and excellent separation.