Stupeň palubní

The installation of the T004 Raymarine deck bracket is designed to be a permanent fixture. Main steps:

Select a horizontal mounting surface.Drill the bracket base and secure it firmly to the boat using four non-magnetic screws. Ensure screw length is appropriate to avoid damaging components beneath the mounting surface.Apply a sealant to waterproof the bracket to the boat, ensuring a watertight fit.Once installed, simply clip your Raymarine Micro Compass into the bracket for each sailing session.

To mount the T004 deck bracket, use four non-magnetic screws. It is essential to select a screw size suitable for your vessel to prevent damage to parts of the boat below the mounting surface.

Yes, once the T004 deck bracket is drilled and screwed to the boat, and the sealing process is completed, it becomes a permanent installation on the deck. The Raymarine Micro Compass can then be easily clipped in and out of this bracket.

For the compass to maintain its accuracy, it must be mounted with a maximum tilt of 20° relative to vertical. There must be no heel to port or starboard. Compliance with this requirement is critical for reliable readings.

Yes, to avoid any magnetic interference that could affect the accuracy of your compass, the T004 bracket must not be installed less than 0.6 meters (2 feet) from magnetic objects. This also includes a conventional compass, which is itself a magnetic object.

The T004 deck bracket is a dedicated accessory and is specifically designed for the Raymarine Micro Compass. It provides an optimal fixed mounting solution for this compass model.

The T004 deck cleat package contains the T004 deck cleat itself. Mounting screws and sealant are not included and must be purchased separately.

The T004 deck bracket is designed to be mounted on a horizontal surface. It is essential to choose a stable and flat location on your boat's deck to ensure correct installation and compass accuracy.