Větev SeaTalk NG délka 1 metr odizolovaný

The Raymarine A06043 cable is a branch (also called a "spur") of the SeaTalkng network system. It is 1 meter long and has a stripped end, meaning it is not terminated with a standard connector, allowing for custom connections or specific terminations.

The Raymarine A06043 cable is used to connect individual Raymarine products, such as instruments or sensors, to the backbone of a SeaTalkng network. It is an integral part of Raymarine's proprietary interconnect bus, enabling data communication between different onboard equipment.

The "bare" end of this cable offers high flexibility for custom installations. Unlike pre-terminated cables, it allows the installer to create a specific termination or connect directly to terminal blocks or devices that do not have standard SeaTalkng connectors, requiring direct wiring.

The A06043 cable, as a SeaTalkng spur, is typically white in color. In the SeaTalkng system, the color code is as follows: backbone cables are blue, spurs are white, and power cables have a red stripe.

The A06043 cable is a branch, or "spur", of the SeaTalkng network. Branches are used to connect individual products to the system's main "backbone", which carries power and data across the network.

The A06043 cable connects on one end to a Raymarine product compatible with SeaTalkng (via its standard connector) and on the other end to an available SeaTalkng backbone connector (typically via a T-connector or junction block). The stripped end allows for a custom connection to the device or terminal block if needed.

The A06043 cable is a spur and does not require a terminator. Terminators are mandatory and must be installed only at the two ends of the SeaTalkng backbone to ensure correct data transmission.

This cable is compatible with all Raymarine products designed to connect to a SeaTalkng network. This includes instruments such as the ST70, as well as other sensors and multifunction displays with a SeaTalkng interface.

The A06043 cable is a native component of Raymarine's SeaTalkng network. To interconnect it with NMEA2000 systems, specific adapter cables or Raymarine products with bridging functionality are required. The A06043 cable itself cannot be directly connected to an NMEA2000 port without an adapter.

The A06043 cable is designed for SeaTalkng. To connect it to an older SeaTalk(1) system, specific adapter cables are required. Some newer Raymarine products may also include a bridging function to facilitate compatibility between SeaTalkng and SeaTalk(1).

Yes, although the SeaTalkng reference manual dates from 2007, this system remains a reliable solution widely deployed for data communication on vessels. It provides native connectivity for many Raymarine products and is still used for extending or modifying existing installations.

A "spur" cable (branch) like the A06043 is used to connect a single device (instrument, sensor) to the backbone of the network. It is usually white in color.
A "backbone" cable (main line) is the primary line of the network that connects the branch connectors and carries power and data throughout the entire system. It is usually blue in color and must be terminated at each end.

The power supply must be connected to the SeaTalkng backbone. It is recommended to connect it to a central or balanced point along the backbone to ensure optimal power distribution to all connected devices.

SeaTalkng pre-terminated cables should generally not be cut or spliced, as this could compromise signal integrity and EMC compliance. However, cable A06043 is specifically designed with a stripped end to allow custom terminations and direct connections, providing flexibility for specific installations.

During installation, it is important to follow EMC installation guidelines, ensure cables are routed properly to avoid interference and physical damage, and not to power up the system until the entire network installation is complete. Ensure terminations are correctly installed at the backbone ends.

Raymarine equipment and accessories, including SeaTalkng cables, are designed to industry-leading standards for use in recreational marine environments and comply with electromagnetic compatibility (EMC) standards. Proper installation is essential to ensure performance is not compromised.

SeaTalkng connectors have a small diameter. This design simplifies installation by making it easier to route cables and connectors through the tight spaces found on board a vessel.

Yes, the SeaTalkng system is designed to simplify installation, and the cables are generally flexible enough to adapt to routing constraints on board a vessel. The variety of cable lengths available and the design with a stripped end for the A06043 provide additional flexibility.

The A06043 cable is a proprietary component from Raymarine for the SeaTalkng network. While SeaTalkng can be interconnected with NMEA2000 systems via adapters, this specific cable is designed for Raymarine products compatible with SeaTalkng and is not directly compatible with equipment from other brands without an adapter or specific interface.

A SeaTalkng network consists mainly of:

A backbone: the main network cable. Terminators: one at each end of the backbone. Spurs: cables like the A06043, which connect individual products to the backbone. Connectors: T-pieces, 5-way or inline to join cables. A power cable: to supply power to the network.