Prise femelle pilote cockpit 6 broches - ST1000+ et ST2000+

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 11%

Raymarine

D338

Zásuvka 6kolíková pro pilotní systém kokpitu – ST1000+ a ST2000+

La prise femelle pilote cockpit 6 broches Raymarine D338 est une pièce de rechange conçue pour les pilotes automatiques à barre franche ST1000+ et ST2000+. Elle assure l'alimentation électrique 12 V et la connectivité SeaTalk/NMEA pour ces modèles, essentiels à leur fonctionnement en croisière côtière. Ce connecteur permet de maintenir la performance des systèmes existants, prolongeant ainsi la durée de vie de ces autopilotes fiables. Inclus : une prise femelle 6 broches.

Prix publicBénéficier du tarif pro

1.978,58 CZK

1.978,58 CZK ~~2.240,26 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ rozhraní	Digital
Provozní napětí	10-15 V
Maximální spotřeba elektrické energie	22.5 W

Description détaillée

Zásuvka 6kolíková pro pilotní systém Raymarine D338 je nezbytnou součástí určenou pro automatické piloty s přímou pákou ST1000+ a ST2000+. Tento díl zajišťuje elektrické a datové propojení těchto autopilotů, umožňující jejich integraci do 12V elektrické soustavy lodi a do sítí SeaTalk a NMEA 0183/0180.

Integrace a funkce

Určena pro jachty s přímou pákou určené pro pobřežní plavbu, tato zásuvka je klíčovým prvkem instalace pilotů ST1000+ a ST2000+. Umožňuje napájení autopilotů (10 V až 15 V DC) a přenos navigačních údajů (vítr, kurz, GPS data) prostřednictvím SeaTalku nebo NMEA. Bez této zásuvky nelze autopilot napájet ani komunikovat s ostatními přístroji Raymarine.

Umístění na trhu

I když Raymarine nabízí modernější a vyspělejší systémy řízení, jako je řada Evolution, piloty ST1000+ a ST2000+ zůstávají běžným řešením pro mnoho majitelů plavidel. Dostupnost náhradních dílů, jako je zásuvka D338, je zásadní pro udržení funkčnosti těchto stávajících systémů. Tato zásuvka zajišťuje dlouhodobou použitelnost instalací vybavených těmito modely autopilotů, které jsou známé svou jednoduchostí použití při pobřežní plavbě.

Documentations

Type	Nom
	EN - Technical Document - 6-pin female cockpit pilot socket - ST1000+ and ST2000+
	EN - User Manual - 6-pin cockpit female connector - ST1000+ and ST2000+
	EN - Quick Reference Guide - 6-pin cockpit female connector - ST1000+ and ST2000+
	EN - Technical Document - 6-pin cockpit pilot female connector - ST1000+ and ST2000+

Avis de l'expert

Pol CONIN

Digitální manažer

« Raymarine D338 plug: essential for ST1000+ and ST2000+ autopilots »

The Raymarine D338 6-pin female connector is a critical spare part for owners of ST1000+ and ST2000+ tillerpilot autopilots. These autopilots, while not the latest models, remain widely used on coastal cruising sailboats due to their simplicity and efficiency. The integrity of this connector is essential as it serves as the single connection point for 12V power supply and SeaTalk/NMEA data interfaces.

In case of failure (corrosion, mechanical damage, or pin wear), replacing this part is necessary to restore full autopilot functionality. Installation typically involves careful removal of the old connector and electrical wiring of the six pins, following the original wiring diagram. While not complex for a trained technician or experienced sailor, connection quality is critical to avoid false contacts and data loss that could degrade autopilot performance at sea. This type of part is not interchangeable with connectors used in newer Evolution-series autopilots, highlighting its importance for maintaining existing ST1000+ and ST2000+ systems.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Zásuvka 6kolíková pro pilotní systém kokpitu – ST1000+ a ST2000+

1.978,58 CZK

1.978,58 CZK ~~2.240,26 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the purpose of the Raymarine D338 cockpit pilot female socket?

The Raymarine D338 female cockpit pilot socket is an essential component that serves as an electrical and data connection interface for the ST1000+ and ST2000+ tiller autopilots. It provides power to the autopilot and transmits navigation data.

Which Raymarine autopilot models are compatible with this connector?

This socket is specifically designed to be compatible with Raymarine ST1000+ and ST2000+ tiller autopilots.

What is the role of this connector in the autopilot's electrical power supply?

This connector provides the necessary electrical connection for powering ST1000+ and ST2000+ autopilots. It allows the autopilot to receive a 10 V to 15 V DC power supply from the boat's 12 V electrical system.

How many pins does this Raymarine D338 female connector have?

The Raymarine D338 cockpit pilot female socket is a 6-pin socket.

Which data networks can be connected via this port?

This port enables the transmission of navigation data via SeaTalk and NMEA 0183/0180 networks. It ensures communication between the autopilot and other compatible Raymarine instruments or chartplotters.

Is installing this socket complex for a recreational sailor?

The ST1000+ and ST2000+ autopilots, for which this connector is designed, are typically intended for owner installation. The connector is a key component of this installation, enabling connection to the boat's electrical system and data networks.

Is this plug an original Raymarine component?

Yes, the D338 connector is an original Raymarine component, designed specifically for the ST1000+ and ST2000+ autopilots.

Is this tiller pilot compatible with other, more recent Raymarine autopilots, such as the Evolution range?

No, this connector is specifically designed for ST1000+ and ST2000+ tiller autopilots. It is not compatible with Raymarine’s newer pilot systems, such as the Evolution range, which use different connection interfaces.

What types of navigation data can be transmitted through this port?

This port enables the transmission of various essential navigation data for autopilot operation, including:

Wind data (for WindTrim mode)HeadingGPS dataThese data are exchanged via SeaTalk or NMEA networks.

Why is this connector essential for the operation of ST1000+ and ST2000+ autopilots?

Without this connector, the autopilot cannot be powered and cannot communicate with other navigation instruments or the boat's electrical system. It is therefore essential for the autopilot to operate and receive the data required for its function.

Can additional autopilot control units be connected via this port?

Yes, thanks to the SeaTalk compatibility of this connector and ST1000+/ST2000+ autopilots, it is possible to easily connect additional fixed or portable autopilot control units to secondary helm or control positions.

What is the required supply voltage for autopilots via this connector?

The ST1000+ and ST2000+ autopilots require a DC power supply between 10 V and 15 V, provided via this connector from the boat's 12 V electrical system.

For which type of boat and navigation are the ST1000+ and ST2000+ autopilots designed?

The ST1000+ and ST2000+ autopilots, for which this connector is a key component, are designed for tiller sailboats intended for coastal navigation. They are not suitable for offshore passages.

Does this connector allow connection to navigation instruments from other brands?

Yes, the ST1000+ and ST2000+ autopilots can be used with any display transmitting NMEA 0183 or NMEA 0180 data. The D338 socket, as an interface, enables this connectivity.

Where is the autopilot cockpit female socket generally installed on a boat?

The female cockpit pilot socket is usually installed in the cockpit, at a single mounting point on the boat's structure, between the tiller and the autopilot. This allows for easy and quick connection of the autopilot.

Is the D338 connector a spare part or intended for a new installation?

The D338 connector can be used both as a spare part to maintain the functionality of existing ST1000+ and ST2000+ systems, and as a component for a new installation of these autopilots.

Is this socket compatible with wheel autopilots?

No, this connector is specifically designed for ST1000+ and ST2000+ tiller-type autopilots. It is not compatible with autopilots intended for wheel steering systems.

Is the D338 female socket supplied with cables for the connection?

No, the Raymarine D338 female socket is the interface component itself. The cables required for power supply or data networks (SeaTalk, NMEA) are not included with the socket and must be purchased separately or are already present in the boat's installation.

Is the D338 product a socket or a complete socket assembly?

The D338 product is the 6-pin female cockpit pilot socket itself. This is the component that provides the connection interface for the ST1000+ and ST2000+ autopilots.

Does this socket require specific installation for deviation correction or other adjustments?

The connector itself does not require any specific adjustments. However, after installing the autopilot and its connections (including this connector), calibration steps are required for the autopilot, such as compass calibration, to optimize its performance on the boat.