SmartSolar MPPT 250/70-Tr

The ultra-fast MPPT (Maximum Power Point Tracking) technology of this controller optimizes solar energy harvesting. It improves energy production by up to 30% compared to PWM controllers and up to 10% compared to slower MPPT controllers, especially when light intensity changes rapidly, such as under a cloudy sky.

The SmartSolar MPPT 250/70-Tr charge controller delivers exceptional conversion efficiency, exceeding 99%. This high efficiency is achieved without the need for a cooling fan, contributing to its reliability.

Yes, the innovative SmartSolar algorithm is designed to maximize energy harvesting even in partial shading conditions. It can detect the optimal maximum power point (MPP), even when multiple power points may be present on the power-voltage curve, thus avoiding being locked onto a suboptimal local MPP.

The SmartSolar MPPT 250/70-Tr charge controller's own consumption is very low, less than 35 mA for a 12 V system and less than 20 mA for a 48 V system.

The controller is designed to operate within a wide temperature range, from -30 to +60 °C (with full rated power up to 40 °C). It supports 95 % humidity (non-condensing) and can be used up to a maximum altitude of 5000 m (full rated power up to 2000 m). It is intended for use in unconditioned indoor environments with pollution degree PD3.

The dimensions of the SmartSolar MPPT 250/70-Tr Tr model are 185 x 250 x 95 mm (height x width x depth). Its weight is 3 kg.

The SmartSolar MPPT 250/70-Tr charge controller can automatically manage battery voltages of 12 V, 24 V or 48 V. It can also be manually configured for 36 V systems.

The maximum nominal PV power the charge controller can support depends on the battery voltage:

12 V: 1000 W24 V: 2000 W36 V: 3000 W48 V: 4000 WIf a higher PV power is connected, the charge controller will limit the input power.

Yes, the SmartSolar MPPT 250/70-Tr charge controller supports synchronized parallel operation. You can synchronize up to 25 units via the VE.Can interface or up to 10 units via Bluetooth.

The regulator is equipped with multiple data communication interfaces:

VE.Can: For wired connection to a Color Control GX, other GX products, a PC, or other devices, and for parallel synchronization.VE.Direct: For wired connection to a Color Control GX, other GX products, a PC, or other devices.Bluetooth Smart: For configuration, monitoring, updates, and wireless synchronization via the VictronConnect app.

For more precise monitoring of battery voltage and temperature (and current, if applicable), you can use the following external sensors via Bluetooth:

Smart Battery SenseBMV-712 Smart Battery MonitorSmartShunt

Yes, the regulator is compatible with Li-ion batteries. It has a recovery function for fully discharged batteries and can reconnect to a fully discharged Li-ion battery with an integrated disconnect function.

The SmartSolar MPPT 250/70-Tr charge controller integrates complete electronic protections to ensure system safety:

Protection against overheating and power reduction in case of high temperature.Protection against PV short circuit.Protection against PV reverse polarity.Protection against PV reverse current.Protection against output short circuit.

The absolute maximum PV input voltage for the SmartSolar MPPT 250/70-Tr charge controller is 250 V (under coldest conditions). The maximum starting and operating voltage is 245 V.

The controller uses a multi-stage adaptive charging algorithm. It comes with eight pre-programmed algorithms selectable via a rotary switch. Additionally, the charging algorithm is fully programmable, allowing complete customization to suit various battery types and specific needs.

Yes, the SmartSolar MPPT 250/70-Tr charge controller is equipped with a remote on/off function. It has a 2-pole connector that allows it to be connected, for example, to a VE.BUS BMS for external control.

The SmartSolar MPPT 250/70-Tr charge controller has an IP43 protection rating for electronic components, meaning it is protected against solid objects larger than 1 mm and water splashes. The connection area has an IP22 rating, indicating protection against solid objects larger than 12.5 mm and dripping water at a maximum tilt angle of 15 degrees.