Flexibilní anténa FA-SC59V

The FA-SC59V flexible antenna is a radio communication component designed by Icom. It is specifically intended for maritime handheld transceivers and ensures the transmission and reception of radio signals in a nautical environment.

Its structure is flexible, allowing it to absorb mechanical stress, shocks, and twisting. This flexibility is a major asset for harbor maneuvers on board vessels, where equipment is often subjected to movement and impacts.

The FA-SC59V antenna is specifically designed to meet the constraints and requirements of portable marine VHF radios, ensuring both performance, robustness, and safety in a nautical environment:

Flexibility and shock resistance: Its flexible structure is designed to absorb mechanical stress, shocks, and frequent twisting aboard a vessel. This protects not only the antenna itself but also the radio’s connector, thereby extending the lifespan of the portable equipment. Marine VHF band optimization: The antenna is specifically tuned to resonate within the standard marine VHF frequency band (156 to 163 MHz). This optimization ensures an optimal standing wave ratio (SWR), maximizing the efficiency of radio signal transmission and reception in a maritime environment. Maintaining radio waterproofing: The antenna’s threading and base incorporate a compression seal. Once screwed onto the radio’s chassis, it ensures the device’s protection rating (e.g., IP57 for the IC-M37E) is maintained, which is essential for resistance to immersion and water spray at sea. Mechanical compatibility and safety features: As an original Icom accessory, the FA-SC59V guarantees exact mechanical threading compatibility. This precision is critical to preserving the radio’s waterproofing and the proper functioning of its safety features, such as the flotation capability and the "Float'n Flash" strobe activation function in case of immersion.

This antenna is specifically tuned to resonate on the standard marine VHF frequency band, which ranges from 156 to 163 MHz. It is optimized for optimal performance across this range.

Yes, the FA-SC59V antenna is an original model from the manufacturer Icom. This ensures exact mechanical thread compatibility and helps maintain the radio's watertightness and specific functions.

Using the original Icom FA-SC59V antenna is essential to ensure the integrity and safety of your portable VHF radio due to its specific design:

Maintaining waterproofing: The FA-SC59V is designed with exact mechanical thread compatibility and includes a compression seal at its base. Once screwed onto the radio’s chassis, this design ensures the device’s protection rating (IP) is maintained, such as IP57 for the IC-M37E portable marine VHF. This means the radio can withstand immersion to 1 meter for 30 minutes without compromising its functionality. Using a non-original antenna could damage this seal and compromise the radio’s waterproofing.Safety features: Precise thread compatibility is also critical for the proper operation of certain safety functions integrated into Icom radios. For example, it is essential for the correct activation of the "Float'n Flash" strobe light function when the radio is dropped into the sea. A non-compliant antenna could prevent this vital function from triggering, making recovery of the device more difficult in the event of an incident.

Yes, the FA-SC59V antenna is supplied as standard equipment with the Icom IC-M37E 6 W marine VHF portable. It can also be purchased separately as a spare part or accessory.

The "optimal SWR" (Standing Wave Ratio) means the antenna is perfectly matched to the frequency band for which it is designed. An optimal SWR ensures efficient transmission and reception of signals, allowing the radio to emit its maximum power with the best possible efficiency.

Strict optimization for the civil marine band (156 to 163 MHz) ensures maximum efficiency and enhanced performance for maritime communications. This distinguishes it from other antennas with wider bandwidths, which may be less effective on this specific band.

While the SMA connector is a standard, the FA-SC59V antenna is an Icom original model. Its threading and base are specifically designed to ensure exact mechanical compatibility with Icom radios, which is essential to maintain waterproofing (IPX7/IP57) and features such as "Float'n Flash". Using it with other brands could compromise these characteristics.

The main difference lies in their bandwidth optimization. The FA-SC59V is strictly optimized for the marine VHF band (156 to 163 MHz), whereas the FA-S59V (used in the IC-M73EURO series) offers a wider bandwidth of 150 to 174 MHz, suitable for professionals using additional land channels.

Yes, as an original Icom antenna with exact mechanical thread compatibility, it is designed to preserve the "Float'n Flash" strobe light activation function in case of man-overboard, if the radio is equipped with it.

No, the FA-SC59V antenna is a flexible antenna for handheld radios. It prioritizes mobility and reduced bulk for the user on deck, unlike a fixed mast antenna which would require an adapter such as the AD-98FSC to connect to a handheld radio.

No, the FA-SC59V antenna installation is designed to be simple and typically does not require specific tools. It screws on by hand to the radio's SMA connector.

Yes, as an accessory designed to be installed and removed, the FA-SC59V antenna is easy to replace. Simply unscrew it from the radio and screw the new antenna into place, ensuring it is tightened properly for waterproofing.