Sběrnicová lišta 8 pólů 650 A

This BEP busbar is designed to support a maximum rated voltage of 50 VDC.

This BEP busbar is a robust version capable of handling a maximum current of 650 amperes (650A).

The dimensions of this 8-stud bus bar are 249 mm in length, 49 mm in width, and 64 mm in height (approximately 9.8" x 1.9" x 2.5").

This busbar is equipped with 8 connection studs for power distribution.

The connection studs on this busbar have a diameter of 10 mm (3/8") and are made of stainless steel.

Yes, this bus bar is supplied with a transparent polycarbonate cover, providing protection while allowing visual inspection.

Yes, this bus bar is specifically designed and manufactured with corrosion-resistant materials for reliable use in a marine environment.

The studs on this busbar use metric threads for the connections.

It is imperative to use only corrosion inhibitor sprays labeled "safe for plastic". Do not wipe solvents or petrochemical products on transparent polycarbonate covers, as these chemicals can damage the plastic, leading to deterioration of properties such as opacity and brittleness.

Yes, it is essential to ensure that all cables connected to this busbar are correctly sized for the loads they carry to guarantee a safe and efficient installation and avoid any overheating.

Yes, the backbone base is made from high-temperature fiber-reinforced plastic, providing high robustness and excellent chemical resistance.

Yes, this busbar is specifically designed for use with electrical systems having a maximum nominal voltage of 50 VDC.

Yes, 10 mm (3/8") studs are commonly used in marine applications for high-current connections, providing robust and reliable connectivity for large-section cables.

Yes, 10 mm (3/8") diameter studs allow connection of cable lugs suitable for a wide range of cable cross-sections. However, it is critical to ensure cables are correctly sized for the loads they carry.

Yes, a busbar is a fundamental component for power distribution and can be used to organize positive or negative connections (including grounding) in a marine electrical system, depending on your installation configuration.

Yes, this busbar is designed for a maximum nominal voltage of 50 VDC. It can therefore be safely used with systems having a lower voltage, such as 12 V or 24 V, provided the maximum current of 650 A is not exceeded.