Těsnicí průchodka CableClam s ukončovacím krytem z nerezové oceli 0,68"

The overall dimensions of the CableClam with its stainless steel cap are as follows:

Length: 49.83 mm (1.96 in)Width: 47.05 mm (1.85 in)Height: 22.61 mm (0.89 in)

The CableClam consists of a stainless steel cap, a split rubber gasket, a deck ring, and a compression ring. These components work together to ensure watertightness and durability.

Installing the CableClam involves several steps to ensure optimal watertightness:

Check if the pre-punched rubber gasket fits snugly around your cable. If needed, drill a hole in the gasket for a precise fit.
Slit the rubber gasket from its edge to the drilled hole.
Secure the deck ring and its gasket to the mounting surface.
Feed the cable end through the stainless steel cap.
Slide the compression ring onto the cable, insert the cable through the gasket slit, then press the gasket into the compression ring.
Screw the compression ring onto the deck ring, tightening each screw progressively without over-tightening.
Press the stainless steel cap onto the assembly for a clean finish.

The CableClam is designed to be mounted using #6 screws. The mounting holes have a pitch of 19.98 mm (0.79 inches).

The stainless steel cap has several functions. It provides an aesthetic finish above the assembly, protects the fastenings from external elements, and contributes to a clean and discreet installation on the deck or bulkhead of your boat.

To adjust the rubber gasket, first check whether the pre-drilled hole provides a tight fit on your cable. If not, drill a hole in the gasket that ensures a tight fit with your cable’s diameter. Then, slit the gasket from its edge to the hole you drilled so you can insert the cable.