Jistič série 187 – montáž na panel 135 A

The BLUE SEA 187 series circuit breaker is a thermal protection device designed for marine electrical circuits. It protects equipment from damage caused by overcurrents and short circuits by automatically cutting off the power supply.

The main feature of this circuit breaker is its ability to handle a rated current of 135 amperes. It is designed for applications requiring robust protection on high-power lines, such as converters, bow thrusters, or high-capacity battery charging circuits.

Yes, the 187 series circuit breaker is an excellent alternative to fuses. It offers the advantage of being manually resettable after an overload, allowing quick restoration without needing to replace a fuse.

This 187-series circuit breaker from BLUE SEA is designed to work with DC electrical systems up to 48V.

Yes, this circuit breaker is protected against ignition per SAE J1171, making it safe for installation in engine compartments or other areas where flammable vapors may be present.

This circuit breaker is of the "manual reset, non-latching" type. This means it must be manually reset after tripping and cannot be held closed if an overload condition persists.

The BLUE SEA 187 series circuit breaker complies with ABYC E-11, CE, and SAE J1171 standards, ensuring its reliability and safety for marine applications.

This circuit breaker is designed for demanding marine environments. It is weather-resistant and flame-retardant, making it suitable for use in various locations aboard a vessel.

Thermal circuit breakers like the BLUE SEA 187 series react to overloads based on heat generated by current. They are robust and reliable for general circuit protection, offering an economical and resettable solution for most marine applications.

This circuit breaker is designed for panel mounting. It integrates directly into the ship's electrical panels or control consoles, requiring an appropriate cutout for installation.

The circuit breaker is equipped with large stud terminals, typically 5/16"-18, designed to accommodate high-cross-section cables suitable for the high currents it handles.

The exact cut-out dimensions for panel installation are available on the product’s technical diagram, usually provided with the circuit breaker or accessible on the product page. It is recommended to refer to this diagram for precise installation.

Installation requires basic marine electrical tools, such as crimping pliers for cable terminals, wrenches for tightening stud terminals, and cutting tools to create the opening in the mounting panel. It is essential to use insulated tools for safety.

Yes, thanks to its flame-resistant design (SAE J1171), this circuit breaker can be safely installed in an engine compartment or other areas where flammable vapors may be present, provided the environment meets the manufacturer's temperature and humidity specifications.

This circuit breaker is compatible with marine DC electrical systems up to 48V, which includes most 12V, 24V, and 48V DC installations found on boats.

Yes, it can be used to protect navigation equipment, provided the rated current of the equipment or circuit does not exceed 135 amperes and the system voltage is compatible (up to 48V DC).

Yes, this circuit breaker integrates perfectly with other BLUE SEA energy management products, such as busbars, battery switches, and distribution panels, allowing you to build a consistent and secure electrical architecture.

Yes, with its rated current of 135 amperes, this circuit breaker is particularly suited for protecting bow thrusters and other high-current-draw equipment, providing rapid cutoff in case of overload.

Yes, like most BLUE SEA Systems products, this circuit breaker is covered by the manufacturer's standard warranty. For specific details regarding duration and conditions, please refer to the warranty information provided by BLUE SEA Systems or contact our customer service.