Pouzdro jističe s tlačítkem pro resetování – průhledné

The BLUE SEA 4135-BSS clear circuit breaker boot is designed to protect push-button reset circuit breakers in marine environments. It shields the reset mechanism from water, salt spray, dust, and UV rays, thereby extending the lifespan and reliability of your electrical equipment.

The transparent design of the 4135-BSS boot allows for quick visual inspection of the circuit breaker's condition without disassembly. This facilitates rapid diagnostics and preventive maintenance of electrical systems while providing physical protection against the elements.

No, this boot is specifically sized for BLUE SEA Systems push-button reset circuit breakers. It ensures optimal compatibility and sealing with these models.

Installing the boot usually involves sliding it over the reset button of the circuit breaker and securing it. For panel-mounted circuit breakers, the boot is often positioned before tightening the mounting nut of the circuit breaker, ensuring proper retention and effective protection. It is recommended to ensure the power supply is cut off before any handling.

Boot 4135-BSS protects the circuit breaker reset mechanism against water (splashes and spray), salt humidity, dust, and ultraviolet (UV) rays. These protections are essential for electrical equipment used in marine environments.

Yes, the BLUE SEA 4135-BSS transparent boot is designed to resist UV rays, which is crucial for equipment exposed to sunlight in a marine environment. This helps prevent material degradation and maintains clarity and protective effectiveness over time.

No, the BLUE SEA 4135-BSS boot is specifically designed for circuit breakers with push-button reset. Its shape and dimensions are not suitable for lever or toggle circuit breakers.

Installing the boot generally does not require any specific tools beyond those possibly needed for the initial breaker assembly (such as a wrench for the mounting nut). The boot simply slides onto the button and is held in place by the breaker’s design and mounting.

No, the 4135-BSS boot is designed to provide protection against splashes, water spray, and moisture. It is not intended to make the circuit breaker watertight in case of total immersion.

Yes, by covering the reset button, the boot helps prevent accidental activations or deactivations caused by unintended contact or light impacts, while still allowing intentional manipulation.

For optimal watertightness, ensure the boot is correctly positioned over the button and that the circuit breaker is properly mounted and tightened, if applicable, so that the boot forms an effective seal with the panel or breaker body. The boot is designed to fit precisely on compatible BLUE SEA circuit breakers.

Although the boot is designed to resist UV rays and marine conditions, prolonged and extreme exposure may, over time, slightly degrade the transparency of any plastic material. However, its design is optimized to minimize this effect and maintain visibility for as long as possible.

No, although Klixon series circuit breakers may benefit from similar protections, the BLUE SEA 4135-BSS boot is specifically sized for BLUE SEA Systems push-button models, ensuring optimal compatibility and waterproofing with them.

The boot is designed to be flexible and should not significantly affect the operation or tactile feel of the reset button. It allows normal pressure to activate or reset the circuit breaker while providing protection.

Yes, the boot is designed to be removable if necessary, for example for maintenance of the circuit breaker or its replacement. It is not permanently fixed, but it stays securely in place once installed correctly.

Yes, the boot is designed for the marine environment, including resistance to fresh water and saltwater humidity. Its composition effectively protects against the corrosive effects of salt.

No, the BLUE SEA 4135-BSS circuit breaker block is a protection accessory sold separately. The push-button reset circuit breaker is not included with the block.

Yes, it is strongly recommended to cut the power supply to the relevant circuit before installing or removing the circuit breaker bundle. This is an essential safety measure when working on any electrical components.