Konektor 12 V s palubní zásuvkou

The Blue Sea Systems 1015-BSS kit is designed for demanding marine environments. It uses corrosion-resistant materials, including a nickel-plated copper alloy for all conductive components, ensuring stable electrical contact and low voltage drop. It is specifically designed to withstand the rigors of humid environments and constant vibrations on board.

The kit includes a 12-volt plug and a dashboard socket.

The nominal operating voltage of this socket is 12V DC.

Yes, the datasheet includes a 10A fuse for enhanced protection of connected devices.

All conductive components are made of nickel-plated copper alloy, ensuring excellent corrosion resistance and optimal conductivity.

Yes, this kit is specifically designed to withstand the rigors of marine environments, including humidity and constant vibrations.

The panel is equipped with a sealing ring that prevents water spray and ensures a firm fit in the socket.

Yes, the base has a watertight cap to protect it when not in use.

Yes, the datasheet includes an "ON" LED indicator that signals its operating status.

Yes, the mount is equipped with an internal cable clamp and a cable gland for sealing, enhancing durability and ease of use in harsh conditions.

The twist-lock system ensures a secure connection, preventing accidental disconnections, especially at sea.

Installing the transducer requires a mounting hole with a diameter of 28.58 mm (1 1/8").

The transducer can be installed on the transom, in a bulkhead, or flush-mounted, providing installation flexibility based on your requirements.

The rear connections of the base are made via two 1/4" push-on blade terminals.

To install the wiring in the connector, you must first remove the cable tie and pass the wire through the opening. Then connect the wiring to the positive and negative terminals, and reinstall the cable tie.

To replace the fuse, remove the fuse cap, then the fuse holder, the spring and the fuse itself. Insert a new 10A fuse, then reassemble all parts in reverse order.

This kit is designed to provide 12V DC power. It is compatible with devices requiring 12V DC power and whose amperage does not exceed the maximum capacity of the plug (10A) or the socket (15A).

Blue Sea Systems supports its products as long as you own them.

The total weight of the kit (plug and socket) is approximately 0.07 kg.