Konektor 12 V s jednoduchou prodlužovací zásuvkou

The [BLUE SEA] 12 Volt Plug with Single Extension Socket is designed to provide a reliable 12V DC power solution in marine and humid environments. It allows you to securely and durably extend your auxiliary electrical network on board, combining a male plug and a female socket.

Yes, this product is specifically designed for marine and humid environments. It is built with corrosion-resistant components and features moisture protection to ensure reliable performance at sea.

This socket is designed to work with 12 V DC (direct current) power systems.

The male connector is protected by an integrated 10-amp fuse, which limits the maximum current the system can deliver to 10A. Although the socket can handle up to 15A, the fuse protection remains set at 10A for the entire system.

Yes, the male plug is fitted with a 10-amp fuse that provides protection against electrical overloads, safeguarding your equipment and installation.

The male plug includes an "ON" LED indicator that lights up when the plug is powered, allowing easy verification of the power supply status.

The product is supplied with robust cabling 1.8 metres in length.

The wiring used is 18 AWG gauge, ensuring efficient conductivity for currents up to 10A.

The conductive components are made of nickel-plated copper alloy, providing excellent conductivity and increased resistance to corrosion, essential in marine environments.

A rotating locking system is integrated to keep the male plug firmly attached to the socket, preventing unintentional disconnections caused by vibrations or movements.

Yes, the socket is fitted with a watertight cap that protects the contacts from moisture and debris when not connected to the male plug.

Yes, the unit is designed to withstand constant vibrations, a common factor in marine environments, thanks to robust components and wide contact surfaces for stable electrical connections.

The product combines a male plug and a female socket. The male plug is usually ready to use with its wiring. The female socket requires wiring and installation on a surface.

It is recommended to ensure the power supply is cut off before any installation. Wiring must be done according to marine electrical standards, respecting polarity and using secure connections. The base is designed to be mounted in a way that protects the rear connections from moisture.

The base is designed with internal traction relief devices for wiring. Wires must be stripped and connected to the appropriate terminals on the base, respecting polarity (positive and negative), and connections must be tight to prevent loosening due to vibrations.

No, this connector is specifically designed for 12 V DC systems. Using it with 24 V could damage the connector, fuse, or connected devices.

No, it is not recommended to use this outlet for devices requiring more than 10 amps, as the built-in 10-amp fuse would trip to protect the circuit. This could also overload the wiring and components, even if the socket is rated at 15A.

The male plug is a standard 12V cigarette lighter type, making it compatible with most standard 12V cigarette lighter sockets or accessory sockets. The supplied female socket is also compatible with this type of plug.

The male connector is fitted with a moisture-resistant sealing ring around the shaft. This gasket prevents water ingress and ensures a firm, reliable electrical contact, even in damp conditions.

Yes, both components (male plug and female socket) incorporate internal strain relief mechanisms. This helps protect the wire connections from mechanical stress and prevents disconnections or damage caused by cable tension.