Stereofonní rozhlasová souprava RA60

The Fusion MS-RA60 marine stereo system is designed for the marine environment. It features an integrated Class D amplifier delivering 4 x 22 W RMS per channel, water resistance rated IPX7 at the front and IPX5 at the rear, and wireless connectivity options including Bluetooth and ANT. It also includes an AM/FM/DAB tuner and line/subwoofer outputs for audio expansion.

The Fusion MS-RA60’s integrated class D amplifier delivers an output power of 4 x 22 W RMS per channel at 4 Ohms with a 14.4 Vdc input voltage and 10% THD. The maximum total music power is 180 W (4 x 45 W max).

Yes, the Fusion MS-RA60 is designed to withstand the marine environment. It has an IEC 60529 IPX7 protection rating for the front panel and IEC 60529 IPX5 for the rear of the unit.

The Fusion MS-RA60 offers two wireless connectivity options:

Bluetooth: 2.4 GHz frequency with a range up to 10 meters.ANT: 2.4 GHz frequency with a range up to 3 meters.

Yes, the Fusion MS-RA60 includes a radio tuner. It supports the following frequency ranges:

FM: 87.5 to 108 MHz (Europe and Australasia), 87.5 to 107.9 MHz (USA), 76 to 95 MHz (Japan). AM: 522 to 1620 kHz (Europe and Australasia), 530 to 1710 kHz (USA), 522 to 1620 kHz (Japan).

Yes, the Fusion MS-RA60 includes a built-in DAB module. It can receive DAB signals via a standard AM/FM antenna. It is important to ensure that the tuner region is configured for an area where DAB stations are broadcast.

The dimensions of the Fusion MS-RA60 are as follows:

Front panel dimensions: 157 mm width x 68 mm height.Mounting dimensions (cutout): 130 mm width x 50 mm height.Mounting depth: 50 mm.Total depth of the unit: 81.2 mm.

The Fusion MS-RA60 marine stereo weighs 316 grams (11.2 oz).

The Fusion MS-RA60 is designed to operate within a temperature range of 0 to 50°C (32 to 122°F). For storage, the temperature range is -20 to 70°C (-4 to 158°F).

Yes, the Fusion MS-RA60 is equipped with an auxiliary input. It is a stereo line input with RCA connectors (red and white) allowing connection of external audio sources such as a CD or MP3 player.

Yes, the Fusion MS-RA60 has a line-out and a subwoofer output for Zone 1. This allows you to connect an external amplifier or a subwoofer to enhance your marine audio system. An "Amplifier on" signal wire is also available to power the external amplifier simultaneously with the stereo.

The Fusion MS-RA60 offers several audio zone adjustment options:

Tone: Adjust bass, midrange, and treble.Tone: Adjust bass, midrange, and treble.Zone Volume Limit: Set a maximum volume limit.Phone Volume Sync: Sync the volume control of the selected zone(s) with the connected Bluetooth device.Sub. Freq. (Zone 1): Change the subwoofer filter frequency.Sub Level (Zone 1): Adjust the subwoofer volume level.Link To Zone 1 (Zone 2): Link the volume and limit of Zone 2 to those of Zone 1.

The Fusion MS-RA60 requires an input DC voltage (Vdc) between 10.8 and 16 Vdc. It must be connected to a power source capable of supplying 15 A.

The Fusion MS-RA60 stereo system is protected by a 15 A mini-blade fuse.

Yes, it is recommended to maintain a safe distance from a compass. The safe distance from a compass for the Fusion MS-RA60 is 15 cm (5.9 inches).

The Fusion MS-RA60 supports two speaker zones. Here are the wire colors for speaker wiring:

Zone 1 Left (+)/(-): White / White/black
Zone 1 Right (+)/(-): Grey / Grey/black
Zone 2 Left (+)/(-): Green / Green/black
Zone 2 Right (+)/(-): Violet / Violet/black

Yes, the Fusion MS-RA60 has an orange wire ("Dim") that can be connected to the boat's lighting wire. This allows you to reduce the stereo screen brightness when the boat lights are on. Make sure the lighting wire gauge matches the fuse rating for the circuit.

Yes, the Fusion MS-RA60 is compatible with Bluetooth devices. It allows wireless audio streaming from smartphones, tablets, or other Bluetooth-compatible devices, with a range of up to 10 meters.