Adaptér kabel 8pin/4pin snímače/sonaru

This Garmin adapter cable (reference 010-12719-00) is designed to connect a Garmin transducer with an 8-pin connector to a Garmin fishfinder or multifunction display with a 4-pin port. It ensures compatibility between different devices in your marine ecosystem.

This cable is compatible with Garmin transducers equipped with an 8-pin connector. It allows interfacing them with newer or different Garmin devices that use a 4-pin port for transducer connection.

This adapter cable is compatible with a wide range of Garmin devices equipped with a 4-pin port. This includes, for example, models from the STRIKER™ series (such as STRIKER™ 4, STRIKER™ 4cv, STRIKER™ Plus 7sv) and ECHOMAP™ series (such as ECHOMAP™ Plus 42cv, ECHOMAP™ UHD 63cv).

No, this adapter cable is specifically designed to connect an 8-pin transducer to a 4-pin fishfinder. It is not reversible and cannot be used to adapt a 4-pin transducer to an 8-pin device.

Yes, if your Garmin transducer equipped with ClearVü or SideVü technology has an 8-pin connector, this adapter will allow you to connect it to a compatible Garmin fishfinder with a 4-pin port, ensuring data transmission from these technologies.

Yes, this adapter cable is compatible with certain models in the Garmin ECHOMAP™ series that have a 4-pin transducer port. Examples include the ECHOMAP™ Plus 42cv and the ECHOMAP™ UHD 63cv.

Yes, this adapter cable is compatible with certain models in the Garmin STRIKER™ series that have a 4-pin transducer port. Examples include the STRIKER™ 4, STRIKER™ 4cv, and STRIKER™ Plus 7sv.

No, this adapter cable is specifically designed for the Garmin ecosystem. It is not compatible with transducers or devices from other brands, even if the connectors appear similar.

Yes, this adapter is designed to ensure the full transmission of data and functionality from your 8-pin transducer to the compatible 4-pin fishfinder, without degrading performance. It does not alter the capabilities of the transducer or the fishfinder.

Installation is straightforward:

Connect the 8-pin end of the adapter cable to your 8-pin Garmin transducer. Connect the 4-pin end of the adapter cable to the 4-pin transducer port of your compatible Garmin fishfinder or multifunction display. Ensure the connections are fully seated and secured to maintain waterproof integrity.

Yes, this adapter cable is designed for marine use. Its connectors are built to resist water and corrosion, ensuring durability and reliability in nautical conditions.

Yes, the connectors are designed to fit in only one direction. The pins and notches of the connectors are polarized to ensure a correct connection. Do not force the connection; if it does not fit easily, check the orientation.

No, installing this adapter cable generally does not require any specific tools. The connectors are designed to be plugged and unplugged by hand, with manual tightening to ensure a secure and watertight connection.

To ensure a secure and watertight connection:

Check that connectors are clean and free of dirt or debris.Align pins and notches correctly.Push the connector firmly until it is fully seated.Tighten the locking ring manually (if present) to seal the connection.

The main purpose of this adapter is to allow users to reuse an existing Garmin 8-pin transducer with a newer or different Garmin sounder or multifunction display that only has a 4-pin port, providing a cost-effective and practical solution.

No, this adapter cable is designed to ensure faithful signal transmission between the transducer and the fishfinder. It does not alter the performance or detection capabilities of your transducer, nor the functionalities of your fishfinder.

Yes, the 8-pin transducer to 4-pin fishfinder adapter cable (reference 010-12719-00) is an original and official Garmin accessory, ensuring compatibility and optimal quality with Garmin products.

Choosing this adapter is an economical and practical solution if you already own a high-performance Garmin 8-pin transducer and want to connect it to a new Garmin 4-pin device. This avoids the purchase of a complete new transducer while retaining the functionality of your existing equipment.

Yes, as an official Garmin accessory, this adapter cable is covered by Garmin’s standard accessory warranty.

No. This cable does not convert the signal nor does it improve the performance of the fishfinder. It only adapts the wiring between a compatible Garmin 8-pin transducer and a compatible Garmin 4-pin fishfinder; the compatibility of functions still depends on the two connected devices.