Montážní sada JLA (93708)

This Garmin mounting bracket (ref. 010-13875-00) is designed to mount JL Audio VeX™ speaker systems on round tubes (roll cages) in marine environments. It features swivel mounts.

This mounting bracket stands out for its robust and versatile design, featuring low-profile machined fasteners to create solid attachment points. It is designed to withstand marine elements and is manufactured in the United States by Axia Alloys.

Yes, the mount has a marine-grade finish and the supplied hardware is designed for outdoor durability, ensuring consistent performance in harsh conditions.

This mounting bracket is manufactured in the United States by Axia Alloys.

Yes, this mount is protected by US patents #8,136,771 and #8,398,035.

The reference number (SKU) for this product is 010-13875-00.

The brand of this mounting bracket is Garmin.

This mounting bracket is specifically designed for JL Audio VeX™ speaker systems.

This mount is compatible with a variety of round tube diameters (roll cages), allowing versatile installation.

The mounting kit includes the following components:

4 Axia Alloys clamps
6 M6 x 16 mm socket head screws
2 M4 x 4 mm set screws (pre-installed)
4 M6 nylstop nuts
2 clamp receivers
1 tube of Loctite® Red thread locker
4 M6 flat washers
1 M6 x 45 mm socket head screw
1 plastic strip

Yes, a Loctite® Red thread-locking compound is included in the mounting kit.

Yes, the installation instructions state that it is possible to rotate the speaker to the desired angle. To do this, you must loosen a screw, rotate the speaker, then reinstall and tighten the speaker mounting screws and washers.

Yes, the M4 x 4 mm socket head cap screws are pre-installed in the collar receiver of the bracket.

After placing the supplied plastic strip around the tube to protect it, push the clamps onto the tube. Then align the clamps with the clamp receiver on the speaker housing.

M6 x 16 mm countersunk screws are used to secure the bracket to the speaker base. They are inserted through the slots in the collar receiver and into the appropriate holes in the bracket base, then fully tightened.

This product is warranted by JL Audio against defects in materials and workmanship for a period of two (2) years from the original purchase date.

No, the warranty is not transferable and applies only to the original buyer from an authorized JL Audio dealer.