ECLIPSE SL100, Strip Light, Blue, 2.5m - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 7%

Garmin

010-04478-00

ECLIPSE SL100, modrá LED páska, 2,5 m

Conçue pour l'éclairage décoratif et indirect, la bande lumineuse Garmin ECLIPSE SL100 bleue de 2,5 mètres est une solution flexible et étanche (IP68) pour tout bateau 12V DC. Résistante aux UV et entièrement encapsulée, elle s'installe facilement en intérieur comme en extérieur. Les clips de fixation à visser sont inclus pour une installation sécurisée.

Prix publicBénéficier du tarif pro

73,88€

73,88€ ~~79,99€~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ výrobku	Bande lumineuse
Provozní napětí	12
Typická spotřeba elektrické energie	12.5
Barva světla	Bleu
Stupeň krytí IP	IP68
Kompatibilní s stmíváním	Oui
Délka pásku	2.5
Hustota LED / metr	60.0
Lepící podklad	Oui
Bend Axis	Vertical
Current Consumption Per Meter	0.41
Minimální poloměr ohybu	50
Rozsah provozního napětí	10-15
Spotřeba elektrické energie na metr	5
Typ napájení	DC
Recommended Installation Environment	Intérieur et extérieur (zones humides)
Strip Thickness	5.2
Strip Width	12.0
Odolnost vůči UV	Oui

Description détaillée

Modrá LED páska Garmin ECLIPSE SL100 (číslo dílu 010-04478-00) o délce 2,5 metru je flexibilní osvětlovací řešení navržené pro diskrétní instalaci. Poskytuje dekorativní a nepřímé osvětlení, ideální pro lemování boků lodi, pod palubní desky či za stropní panely. Tento monochromatický modrý model se odlišuje od dvoubarevných (modré a bílé) či RGB verzí řady ECLIPSE, které vyžadují použití jednotky ECLIPSE Command Center pro plnou správu barev a efektů. Páska ECLIPSE SL100 modrá je určena pro aplikace vyžadující jednoduché a účinné akcentové osvětlení.

Konstrukce a technické specifikace

Vyrobena z UV odolných materiálů a plně zalitá, je LED páska ECLIPSE SL100 vhodná pro vnitřní i venkovní námořní prostředí s klasifikací IP68, která zaručuje ochranu proti prachu a dočasnému ponoření, nikoli však pro trvalé ponoření. Obsahuje 60 LED na metr a pracuje výhradně na 12V DC, s napěťovým rozsahem 10 až 15V DC. Typická spotřeba je 5 wattů na metr, což při 12V představuje odběr 0,41A na metr. K dispozici jsou také další délky, jako 1 metr a 5 metrů, pro různorodé instalační potřeby.

Instalace a flexibilita

S rozměry 10,8 mm výšky a 5,2 mm hloubky nabízí tato LED páska minimální ohybový poloměr 50 mm ve vertikální ose, přičemž je zakázáno ohýbat ji v horizontální ose. Instalace se provádí nařezáním na požadovanou délku, přičemž konce je nutné utěsnit dodaným silikonem. Montáž je možná pomocí dodaných 3M lepicích pásků a/nebo šroubovacích svorek pro mechanické upevnění, doporučené zejména pro venkovní použití či vlhké oblasti. LED páska ECLIPSE SL100 může být ovládána pomocí jednoduchého spínače zapnuto/vypnuto, okamžitého spínače, multifunkčního displeje či chytrého zařízení.

Documentations

Type	Nom
	Installation Guide - Garmin Eclipse SL100 LED Strip Light (EN)

Avis de l'expert

« ECLIPSE SL100 marine lighting: Simplified integration and reliability »

Garmin's ECLIPSE SL100 LED strip is a supplementary lighting solution that stands out for its ability to discreetly integrate into deck or cabin layouts. Its flexible design, with a minimum vertical bend radius of 50 mm, allows it to follow the boat's contours, providing effective indirect lighting without being intrusive. Unlike the two-color or RGB versions in the ECLIPSE range, this single-color blue model does not require an ECLIPSE Command Center, simplifying wiring and installation for more basic setups. This simplicity is an advantage for owners seeking a "plug-and-play" solution for accent lighting.

The most critical aspect of installation is the cutting and sealing of the ends. It is essential to follow the instructions precisely to maintain the IP68 rating of the strip, particularly the application of the supplied silicone. For enhanced durability in outdoor conditions or areas subject to vibration, using the screw-in mounting clips in addition to the adhesive is highly recommended. This ensures reliable mechanical retention against the constraints of the marine environment. This type of strip is particularly suitable for mid-sized boats where an aesthetic touch is desired without excessive system complexity. It should be noted that, although IP68-rated, it is not designed for permanent submersion, limiting its use to deck areas or interior spaces protected from prolonged immersion.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SL100, modrá LED páska, 2,5 m

73,88€

73,88€ ~~79,99€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the color of this ECLIPSE SL100 light strip?

This Garmin ECLIPSE SL100 blue light strip provides simple and effective accent lighting.

What is the length of the ECLIPSE SL100 LED strip?

The ECLIPSE SL100 light strip has a length of 2.5 meters.

Is this LED strip suitable for outdoor use on a boat?

Yes, the ECLIPSE SL100 LED strip is made from UV-resistant materials and is fully encapsulated, making it suitable for indoor and outdoor marine environments. However, it must not be installed in areas of direct strong sunlight.

What is the waterproof rating of the ECLIPSE SL100 LED strip?

The ECLIPSE SL100 LED light strip has an IP68 rating. This ensures protection against dust and temporary immersion, but it is not designed for permanent submersion.

Can the light strip be cut to fit a specific length?

Yes, the LED strip can be cut at the marked cutting points. It is essential to seal the cut end with the supplied silicone adhesive to maintain the product's waterproofing.

How to install the ECLIPSE SL100 LED strip?

Installation is done in several steps:

Clean the mounting surface thoroughly with IPA.
Remove the 3M adhesive backing and press the strip firmly into place, applying pressure only on the edges (not on the LEDs).
For outdoor installations, wet areas, or tight bends, it is recommended to use mechanical fasteners (mounting clips) in addition to the adhesive.
Allow the adhesive to cure for 24 hours before powering on the light strip.

Is additional mounting required for outdoor installation or in wet areas?

Yes, for outdoor installations in damp areas or with tight bend radii, it is recommended to use mechanical fasteners (mounting clips) in addition to the adhesive layer. These fasteners should be spaced 250 to 300 mm apart.

What is the minimum curvature that the LED strip can withstand?

The ECLIPSE SL100 light strip has a minimum bending radius of 50 mm (1.968 inches) on the vertical axis only. It is critical not to bend it on the horizontal axis or twist it.

What precautions should be taken when handling or installing the LED strip?

During handling and installation, it is important to:

Do not let the strip fall or twist.Do not apply pressure on the LED area, only on the edge of the strip.Do not pull, stretch, twist, or bend the strip on the horizontal axis.Always use two people to install lengths over 1 meter.Unroll the strip flat in a straight line and do not allow it to bend, twist, or bunch up.

What type of surface is recommended for installing the adhesive strip?

The mounting surface must be perfectly clean, free of dust and dirt. It is recommended to clean it thoroughly with isopropyl alcohol (IPA) before applying the 3M adhesive tape.

What is the required supply voltage for this LED strip?

The ECLIPSE SL100 LED light bar is designed to operate exclusively on 12V DC boat systems. It can operate within a voltage range of 10 to 15V DC. Never connect it to voltages outside this range or directly to AC power.

Can I connect this LED strip to a 24V electrical system?

No, this LED strip is designed to operate only with 12V DC boat systems. Connecting it to a 24V system could damage it.

Does this single-color LED light strip require an ECLIPSE Command Center?

No, this single-color blue version of the ECLIPSE SL100 light strip does not require an ECLIPSE Command Center to operate. It can be wired directly to an on/off switch. However, it can be connected to a Command Center if desired, following the specific wiring diagrams.

How many LEDs are there per meter on this LED strip?

The ECLIPSE SL100 LED strip integrates 60 LEDs per meter, providing uniform and efficient lighting.

What is the power consumption of the ECLIPSE SL100 LED strip?

The typical power consumption of the ECLIPSE SL100 LED strip is 5 watts per meter. This corresponds to a current draw of 0.41 ampere at 12V per meter.

Is this LED strip UV-resistant?

Yes, the ECLIPSE SL100 LED strip is made from UV-resistant materials. However, it is recommended not to install it in areas exposed to strong and prolonged direct sunlight.

What should I do after cutting the light strip to the correct length?

After cutting the light strip, it is crucial to seal the cut end. Peel 20 mm of the adhesive backing, mark and remove the adhesive tape to expose the silicone, then fill the end cap halfway with the supplied silicone adhesive and secure it. Allow to cure for 24 hours before handling.

Is it necessary to hire a professional to install this LED strip light?

It is strongly recommended that a qualified professional carry out the electrical and mechanical installation of the ECLIPSE SL100 LED strip to ensure correct and safe installation.

Can I mix single-color and RGB LED strips on the same ECLIPSE Command Center zone?

No, single-color, dual-color, and RGB LED strips must not be connected to the same zone output on an ECLIPSE Command Center. Each type of LED strip requires a dedicated zone output.

What is the main purpose of the ECLIPSE SL100 LED strip?

The ECLIPSE SL100 LED light strip is designed to provide decorative and indirect lighting. It is ideal for creating ambiance on the gunwales, under furniture, or behind ceiling panels on your boat.