GPSMAP® 1022 - zobrazovač 10"

The GPSMAP® 1022 is compatible with several third-party network cameras and Garmin:

FLIR M and MD series thermal cameras.
Garmin GC™ 14 cameras (part number 010-02667-00).
Garmin GC™ 200 cameras (part number 010-02164-00).
To connect standard Ethernet devices, including network cameras, to a Garmin marine network, a Garmin Power over Ethernet (PoE) isolation coupler (part number 010-10580-10) must be used. Connecting a PoE device directly to a Garmin chartplotter will damage the chartplotter. FLIR IP cameras are generally plug-and-play and are detected automatically, while older analog FLIR cameras require manual pairing with a video input.

For a flush-mounted installation of the GPSMAP® 1022, the recommended cutout dimensions are as follows:

Width: 304.3 mm (12 inches)Height: 166.1 mm (6 9/16 inches)It is strongly recommended to use the mounting template provided in the product box to ensure precise cutting and avoid damage to your boat’s mounting surface.

Yes, a Garmin Power over Ethernet (PoE) isolation coupler (part number 010-10580-10) is absolutely necessary to connect any standard Ethernet device, such as a network camera, network switch, or PoE injector, to a Garmin marine network. Connecting a PoE device directly to a Garmin chartplotter will damage the chartplotter and potentially the PoE device. Using a shielded cable, such as a CAT 5e F/FTP, is also recommended for optimal protection of your equipment.

Yes, the GPSMAP® 1022 supports camera tracking features, provided compatible cameras and sensors are connected. These features include:

Compass lock: To keep the camera fixed in one direction.Ship lock: To lock the camera at a fixed angle relative to the vessel.Target tracking: To track AIS, MARPA targets, or waypoints (called "slew-to-cue").To use these functions, you must connect a compatible marine camera with tracking (such as a recent FLIR IP video camera), a GPS antenna, and a heading sensor (ideally a 9-axis sensor for better performance). For AIS and MARPA tracking, a compatible AIS receiver and a compatible radar device are also required.

Yes, the GPSMAP® 1022 is compatible with FLIR M-Series cameras, whether they have a network video output or not. FLIR IP cameras are usually detected automatically. For FLIR M-Series models without network video output, or older analog cameras, pairing between the camera and a chartplotter-integrated video input may be required. In all cases, a Garmin PoE isolation coupler (010-10580-10) is required to connect these cameras to the Garmin marine network.