SUPRA THX1604 EOS, podmořský reflektor průchozí a ovladač

The Garmin Lumishore EOS THX1604 is a high-intensity through-hull underwater light. It is designed for recreational boaters and yacht owners seeking a discreet and high-performance lighting solution, featuring a flush-mount aesthetic on the hull.

The THX1604 EOS spotlight delivers 17,500 lumens in RGB version (full spectrum). It offers an ultra-wide beam angle of 110°, creating an extended halo effect underwater.

The THX1604 EOS underwater light is available in full-spectrum RGB (RGBW) version, providing flexibility to create various underwater lighting ambiances.

The THX1604 EOS spotlight features an ultra-wide beam angle of 110°, allowing it to spread light over an extended area and create a halo effect.

The THX1604 EOS floodlight is designed for durability in marine environments. It features a marine-grade bronze housing and a borosilicate glass lens.

Yes, the THX1604 EOS spotlight has an IP68 protection rating. This ensures full resistance to dust and prolonged immersion in water.

The Garmin SUPRA THX1604 EOS underwater light is a through-hull model. It is designed for flush-mounted installation, providing a clean aesthetic on the boat's hull.

The spotlight can be installed on GRP hulls (glass-reinforced plastic or fiberglass). For wooden, metal, or carbon fiber hulls, an isolation kit will be required.

For optimal performance, the underwater light should be installed between 150 and 250 mm (6 to 10 inches) below the boat's minimum waterline.

For optimal lighting results, install the spotlights at a distance of between 0.8 metres (2.5 feet) and 2 metres (6.5 feet) from each other.

Several precautions are essential:

Always ensure the vessel’s power source and battery are disconnected or isolated before installation. Electrical and mechanical installation must be performed by a qualified professional. Use an appropriate fuse or circuit breaker to protect the entire system. Never attempt to install or remove the underwater light while the boat is in the water. The underwater light must not be exposed to temperatures exceeding 65°C (150°F), for example near hot engine components or exhaust emissions.

The spotlight must be mounted on a flat (non-curved) surface of the hull. Installation is only possible on the transom or the sides of the hull.

Torque of 3 Nm (26 in-lbs) per bolt must not be exceeded for the mounting bolts of the spotlight.

All Lumishore products must be connected to the DC system via a bonding strap for galvanic protection. However, this requirement does not apply to lights that are fully immersed at both the front and rear, which is typically the case for a through-hull light.

The THX1604 EOS spotlight is compatible with Lumishore EOS control systems, such as the EOS-LUX control center, the STV 2204-i, or a compatible multifunction display (MFD).

The THX1604 EOS spotlight requires a 24V DC power supply. It is not rated for 12V DC use.

The THX1604 EOS spotlight draws a maximum current of 6.5 A when powered by 24 V DC.

Yes, a DMX cable is required for the connection. A 1-meter DMX cable is included, and extension cables are available if a longer length is needed. A DMX terminator (PN: 24-0087) must also be installed.

Yes, it is imperative to use a fuse or circuit breaker suitable for protecting the entire lighting system.

Incorrect installation of the THX1604 EOS projector will void the product warranty. It is therefore essential to strictly follow the provided installation instructions.