LUX DL65 AG, stropní svítidlo proti oslnění 5 W, chromový lem

The Garmin LUX DL65 AG is a 5.5-watt recessed anti-glare floodlight designed specifically for interior lighting on vessels. It provides a full CRGBW color spectrum (cool white, red, green, blue, warm white) with adjustable white temperature.

This downlight provides a full CRGBW color spectrum, including red, green, blue, cool white, and warm white. The white temperature is adjustable, ranging from 2700K (warm white) to 6500K (cool white).

Yes, the LUX DL65 AG spotlight is dimmable as standard. It can be controlled via a momentary switch.

The power consumed by the LUX DL65 AG spotlight is 5.5 watts per light. Typical current draw is 0.45A at 12 volts and 0.23A at 24 volts.

No, the LUX DL65 AG spotlight is designed for indoor use only. It must not be installed in outdoor environments.

The housing of the LUX DL65 AG floodlight is made of hard-anodized aluminum, ensuring durability and resistance in the marine environment.

The rear of the spotlight may become warm to the touch, but this will not damage the mounting surface.

For the mechanical installation, a 65 mm diameter hole must be cut. It is recommended to cut a slightly smaller hole and adjust it for a precise fit.

Cutout diameter: 65 mmOuter diameter of bezel: 82 mmMounting depth: 47 mmTotal height (from mounting surface to rear): 32.30 mmBezel thickness (above mounting surface): 3.00 mm

For indoor installations, the spotlight is supplied with spring clips. Simply pull the clips gently backward, insert the spotlight into the hole, and release the clips. It is also recommended to secure it with suitable marine sealant/adhesive and countersunk screws after removing the spring clips.

Yes, it is imperative to always ensure that the ship's power source and battery are disconnected or isolated before proceeding with the installation of the spotlight.

It is strongly recommended that a qualified professional carry out both the electrical and mechanical installation of the LUX DL65 AG downlight.

The spotlight must be mounted on a flat and non-curved surface to ensure correct and secure installation.

After installing the projector, remove the adhesive film from the lens and press it carefully into place on the light fixture. The adhesive lens is designed for single use; repeated removals may degrade the adhesive strength. Ensure the light fixture is clean and free of grease and dust before attaching the lens.

No, the LUX DL65 AG is not a standalone light. It requires a connection to the Lumishore Lux Downlight module to function correctly.

For advanced integration and control with compatible Garmin multifunction displays (MFD) or Lumishore displays, you will need a Lumishore Lux Light Control module and a Lumi-Link control hub.

A single Lumishore Lux Light Control module can manage up to 16 LUX DL65 AG floodlights, providing high flexibility for complex lighting installations.

No, the LUX DL65 AG is designed to be used exclusively with the Lumishore Lux Downlight module. Connecting to other third-party lighting control or dimmer products is not supported and will void the warranty.

The lighting system, including the LUX DL65 AG spotlight and its accessories, is warranted by LUMISHORE Ltd against manufacturing defects for a period of three years from the original purchase date.

The warranty may be voided in case of misuse, incorrect installation, negligence, damage caused by disasters (fire, flood, lightning), installation by unqualified personnel, unauthorized repair or modification, or unapproved installations. Failure to comply with installation, maintenance, and usage guidelines also voids the warranty, including the use of lighting control modules other than the Lumishore Lux Downlight control module.