Lux NeonFlexStripLt SNL180CRGBW-1300mm, LS, (60-0382-1300)

The Lux NeonFlexStripLt SNL180CRGBW LED light strip measures precisely 1300 mm in length.

This LED strip integrates CRGBW LEDs, meaning it can produce a full spectrum of colors (red, green, blue) as well as two white temperatures: cool white and warm white.

Yes, the white temperature is fully adjustable and can be set to range from 2700K (warm white) to 6500K (cool white), allowing different ambiances to be created.

The Lux NeonFlexStripLt strip is designed to provide a "neon" diffused effect. This ensures uniform illumination without visible hotspots, ideal for creating sophisticated onboard lighting.

Yes, the Lux NeonFlexStripLt strip is specifically designed for marine environments. It can be installed indoors or outdoors, provided it is positioned above the waterline.

The strip has an IP67 rating. This means it is fully protected against dust and can withstand temporary immersion in water. However, it is not designed to be permanently submerged.

Yes, it is made from UV-resistant material and has been rigorously tested in salt spray, ensuring durability and performance in demanding marine conditions.

The power consumption of this LED strip is 5 watts per meter.

This LED strip requires a specific input voltage between 23 and 25V to operate correctly.

The Lux NeonFlexStripLt LED light strip is designed for exclusive use with the Lumishore LUX Neon Flex Strip Light Driver modules.

No, it is essential not to connect this LED strip to lighting control products or third-party controllers. It is designed to operate exclusively with Lumishore LUX Strip Light Driver modules.

No, it is strictly forbidden to cut the light strip. It is supplied in predefined lengths and factory-sealed to ensure compliance with IP67 standards. Any cutting would void the product's waterproofing and warranty.

The strip is installed using provided stainless steel clips. These clips are screwed into place, then the strip is simply pushed into the clips until a "click" is heard, confirming it is securely fastened. It is recommended to use multiple clips around tight curves.

The LED strip has a minimum bending radius of 120 mm. It is critical to bend it only along the lateral axis and never along the vertical axis or twist it, to avoid damaging the internal LEDs.

Always unroll the neon strip carefully along its entire length; do not lift it by one end only.Avoid dropping or twisting it during installation.Do not apply excessive pressure, as this could damage the internal LED strip.Do not pull, stretch, twist, or bend the strip vertically.For lengths over 1 meter, it is recommended to install it with two people.

Although UV-resistant, the strip must not be installed in areas exposed to strong, prolonged direct sunlight. Additionally, it must not be installed where it will be permanently submerged in water.

To ensure safety, compliance, and warranty validity, the electrical and mechanical installation of this LED strip must be performed by a qualified professional.

Lumishore Ltd guarantees its lighting systems and accessories against manufacturing defects for a period of three years from the original purchase date.

The warranty will be void in case of misuse, abuse, incorrect installation, neglect, installation by unqualified personnel, unauthorized repair or modification, or use with non-approved third-party pilots. Failure to comply with the installation, maintenance, and usage guidelines specified in the documentation will also void the warranty.