LUX SL180, Strip Light, CRGBW, 3300mm - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 11%

Garmin

010-04393-00

LUX SL180, LED pás, CRGBW, 3300 mm

La bande lumineuse Garmin LUX SL180 CRGBW de 3300mm offre un éclairage marin complet avec couleurs et blanc tunable (2700K-6500K). Certifiée IP68 et coupable tous les 100 mm, elle est conçue pour une installation polyvalente sur les bateaux, nécessitant un module pilote Lumishore dédié. Ce modèle est livré avec un kit de scellement pour les coupes et des clips de fixation, assurant une intégration discrète et étanche.

Prix publicBénéficier du tarif pro

229,14€

229,14€ ~~259,99€~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ výrobku	Bande lumineuse LED
Provozní napětí	23-25 V
Typická spotřeba elektrické energie	16.5 W
Barva světla	CRGBW (Blanc froid, Rouge, Vert, Bleu, Blanc chaud)
Stupeň krytí IP	IP68
Kompatibilní s stmíváním	Oui
Délka pásku	3.3
Hustota LED / metr	60.0
Lepící podklad	Oui
Adhesive Curing Time	24
Bend Axis	Vertical
Compatible Driver Module	Lumishore LUX Strip Light Driver
Cuttable	Non
Fastener Spacing	25-30
Material Uv Resistant	Oui
Minimum Bend Radius	50
Mounting Clips Material	Acier inoxydable
Spotřeba elektrické energie na metr	5
Doba záruky	3

Description détaillée

LED pás Garmin LUX SL180 CRGBW o délce 3300 mm představuje univerzální osvětlovací řešení pro námořní prostředí s plným barevným spektrem a laditelným bílým světlem. Navržen pro diskrétní integraci na palubě umožňuje vytvářet přizpůsobené světelné atmosféry nebo zajišťovat funkční osvětlení. Tento model se vyznačuje schopností poskytovat intenzivní barvy (červená, zelená, modrá) a dva odstíny bílého světla (studený a teplý) v rozsahu 2700K až 6500K.

Konstrukce a technická integrace

S hustotou 60 LED CRGBW na metr poskytuje LED pás LUX SL180 homogenní rozptyl světla po celé délce 3300 mm. Jeho krytí IP68 jej činí vhodným pro vlhká námořní prostředí, a to jak pro instalaci uvnitř, tak venku, i když není určen pro trvalé ponoření. Instalace je usnadněna díky samolepící pásce 3M a dodávaným sponám, přičemž flexibilita řezu každých 100 mm umožňuje přesné přizpůsobení prostoru. Produkt je dodáván s těsnícím kitem pro ořezané konce, který zajišťuje udržení těsnosti.

Kompatibilita a ovládání

LED pás LUX SL180 vyžaduje pro svou funkci řídicí modul Lumishore LUX Strip Light Driver a vstupní napětí 23 až 25 V. Jeho příkon činí 5 wattů na metr. Pro pokročilé ovládání, zejména prostřednictvím kompatibilního multifunkčního displeje, chytrého zařízení nebo zobrazovače Lumishore, je nutný řídicí systém EOS-LUX v kombinaci s modulem. Ve srovnání s klasickými RGB řešeními technologie CRGBW nabízí věrnější a jemnější reprodukci bílého světla, což je zásadní pro kvalitní osvětlení na palubě.

Documentations

Type	Nom
	Installation Guide - Installation Guide for LUX SL90 & SL180 IP68 LED Strip Lights

Avis de l'expert

Pol CONIN

Digitální manažer

« Technical analysis: Garmin LUX SL180 CRGBW LED strip light »

The Garmin LUX SL180 LED strip provides a flexible and aesthetic lighting solution for various marine applications. Its ability to be cut every 100 mm, combined with a 50 mm vertical bending radius, offers significant adaptability for custom installations, whether illuminating side decks, accentuating interior architectural elements, or creating ambiance under gunwales. The CRGBW technology is a major advantage, enabling not only dynamic color effects but also high-quality tunable white lighting, adjustable from warm to cool white—a common weakness of pure RGB systems in marine environments.

Integrating this system requires the Lumishore LUX Strip Light Driver control module, a key consideration during installation planning. This module manages power supply (10.5–31V DC) and commands for optimal performance. For centralized control via an MFD or smartphone, the EOS-LUX control hub is necessary. This positions the LUX SL180 as a scalable solution suited for installations prioritizing discreet, flexible, and sophisticated lighting control aboard. It is ideal for recreational boats and yachts where lighting aesthetics and functionality are key, but less suitable for applications requiring permanent submersion.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, LED pás, CRGBW, 3300 mm

229,14€

229,14€ ~~259,99€~~

Complétez votre installation avec des

Équipements complémentaires

Garmin

GPSMAP® 8410 – 10" zobrazovací jednotka s mapovou sadou světa

Ref : 010-02091-00

2.237,30€

2.237,30€ ~~2.939,00€~~

Garmin

GPSMAP® 8416xsv - kombinovaný GPS-sonar 16"

Ref : 010-02093-02

5.253,08€

5.253,08€ ~~6.829,00€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the exact length of the Garmin LUX SL180 LED strip?

The Garmin LUX SL180 light strip has a length of 3300 mm.

What lighting colors are available with the LUX SL180 LED strip?

The LUX SL180 LED strip provides a full spectrum of colors (CRGBW), including red, green, blue, and two white shades: cool white and warm white, covering a range from 2700K to 6500K.

What is the protection rating (IP) of this LED strip and is it waterproof?

The LUX SL180 LED strip has an IP68 protection rating. This means it is fully sealed and can be installed in wet areas, both indoors and outdoors. However, it is not designed for permanent submersion in water.

Which control module is required to use the LUX SL180 LED strip?

The LUX SL180 LED strip must be used together with Lumishore LUX Strip Light Driver modules. It must not be connected to any other third-party lighting control products or drivers.

What is the power consumption of the LUX SL180 LED strip?

The LUX SL180 light strip has a nominal power of 5 watts per meter.

How is the LUX SL180 light strip mounted during installation?

Installation is made easier by a 3M adhesive strip. For outdoor installations in wet areas or with tight bend radii, it is recommended to use mechanical fastenings (mounting clips) in addition to the adhesive layer. These fastenings should be placed every 25 to 30 cm and/or on each side of a bend.

Can the LUX SL180 light strip be bent, and what are the limits?

Yes, the LED strip can be bent with a minimum bending radius of 50 mm, but only along the vertical axis. It is important not to bend it along the horizontal axis or twist it.

What is the required input voltage range for this LED strip?

The LUX SL180 LED strip requires an input voltage range of 23 to 25V. It must be used exclusively with Lumishore LED strip driver modules.

What is the warranty duration for the LUX SL180 LED light strip?

The warranty for the LUX SL180 LED strip is three years from the original purchase date, covering manufacturing defects.

What can void the warranty on my LED strip?

The warranty may be void in case of misuse, abuse, incorrect installation, negligence, improper shipping, damage caused by disasters (fire, flood, lightning), installation by unqualified personnel, unauthorized repair or modification, or unapproved installations. Use with third-party autopilots also voids the warranty.

Is the LED strip material UV-resistant?

Yes, the LED strip is made from UV-resistant materials. However, it is recommended not to install it in areas exposed to strong direct sunlight.

Should the boat's power supply be disconnected before installing the LED strip?

Yes, it is imperative to always ensure that the vessel's power source and battery are disconnected or isolated before proceeding with the installation of the light strip.

What precautions should be taken when handling the light strip during installation?

Do not let the LED strip drop or twist during installation; carefully unroll it from the reel. Do not apply pressure on the strip at the LED level; press only on the edge of the strip. Do not pull, stretch, twist, or bend the strip on the horizontal axis. Always use two people to install lengths over 1 meter. Always lay the strip flat in a straight line; do not allow it to bend, twist, or coil into a pile.

Which white type is available with the CRGBW function?

The CRGBW function provides a cool white and a warm white, with a colour temperature range from 2700K to 6500K.

Is it necessary to be a qualified professional to install the LED strip?

Yes, a qualified professional should perform the electrical and mechanical installation of the LED strip to ensure proper and safe installation.

Where should the LUX SL180 light strip NOT be installed?

Although the material is UV-resistant, the light strip must not be installed in areas exposed to strong direct and intense sunlight.

Is the LUX SL180 light bar compatible with third-party lighting control systems?

No, the LUX SL180 LED strip is designed to operate exclusively with the Lumishore LUX Strip Light Driver module. Using third-party control systems will void the product warranty.

What type of use is the LUX SL180 LED strip intended for?

The LUX SL180 LED light strip is a versatile marine lighting solution, designed to create custom lighting ambiances or provide functional lighting aboard vessels.