Napájecí kabel NMEA 2000®

This cable is an essential component designed to provide dedicated power to your boat's NMEA 2000 backbone network. It ensures the proper operation of all devices connected to the network by supplying the necessary power.

The Garmin 010-12935-30 NMEA 2000® power cable is 2 meters long. This length provides some flexibility for routing behind your vessel's consoles and panels.

This cable is fitted with a molded 5-pin Micro-C connector at one end. This type of connector is standardized and ensures a secure connection to the NMEA 2000 backbone network.

The other end of the cable consists of bare wires. These are designed to allow a direct and secure connection to a fused DC (direct current) power source on your boat.

No, this cable is specifically designed for powering the NMEA 2000 network. It does not include data conductors and therefore does not transmit any information.

The conductors of this NMEA 2000® power cable are 18 AWG. This gauge is suitable for supplying the electrical power required by the network.

Yes, this cable is built with marine-grade construction. It is designed to withstand water and corrosion, making it perfectly suited for demanding marine environments.

The connection point of this cable is molded, which contributes to its durability. This design enhances its resistance to bending and ensures better longevity in marine conditions.

Yes, for the safety of the NMEA 2000 system and your vessel, installing an external fuse is required. This fuse must be 3 amperes (3A) or less.

This cable must be connected to the NMEA 2000 backbone network. It is designed to provide the main power supply to the entire network, ensuring that all connected devices receive the necessary power.

The cable is supplied with a length of 2 meters and a molded Micro-C connector. It is recommended to use the cable as-is to maintain the integrity of the NMEA 2000 network connection. The stripped end can be prepared for connection to the power source.

This cable is designed to be connected to a DC power source (direct current) on your boat. It is crucial to pair it with an external fuse of 3A or less for system protection.

The bare-wire end must be connected to a fused DC power source. It is essential to follow the NMEA 2000 network installation manual instructions to ensure a correct and secure connection, respecting polarity.

Installing this cable requires a DC power supply connection and integration into an existing or new NMEA 2000 network. While instructions are usually clear, basic knowledge of marine electrical systems is recommended. If in doubt, consult a professional.

Yes, absolutely. The Garmin NMEA 2000® power cable complies with NMEA 2000 specifications and is compatible with all NMEA 2000-certified devices and brands, ensuring full interoperability within the network.

No, this cable is specifically designed for NMEA 2000® networks. It is not compatible with NMEA 0183 networks, which use a different protocol and connectors.

No, this cable is equipped with a 5-pin Micro-C connector, which is the most common standard for NMEA 2000 networks. It is not directly compatible with Mini-C connectors, which are larger and used for networks requiring higher power or longer cable lengths.

This cable is designed to power the entire NMEA 2000 backbone network, not a single device. Devices connect to the backbone via drop cables and draw power from the network.

The NMEA 2000 standard operates on a direct current (DC) supply, typically 12V. This cable is designed to provide this power to the network. It is essential to connect this cable to an appropriate 12V DC power source, with the required external fuse.