Přístrojová krytka pro STRIKER / STRIKER Vivid 5 palců

This 010-13130-00 cover is designed for Garmin STRIKER / STRIKER Plus / STRIKER Vivid devices in the 5-inch format, including STRIKER 5cv, STRIKER 5dv, STRIKER Plus 5cv, and STRIKER Vivid 5cv.

It protects the fishfinder’s display and housing when the unit is not in use by limiting exposure to sun, dust, scratches, and marine environment spray.

The cover is installed directly on the front face of the compatible device. It is used when the vessel is not underway and the display does not need to be accessed.

No. This is a front-panel cover to protect the screen and front face. For long transport or storage off the boat, it can be supplemented with a suitable transport cover.

No. This reference corresponds to the 5-inch units. The 7-inch and 9-inch versions use different-sized bezels.

No. This reference is for the STRIKER 5-inch units. The 7-inch or 9-inch versions use different hood dimensions.

Yes, it helps protect the screen and front panel from common scratches when the device is off or idle.

Yes, it reduces direct screen exposure to sunlight when the display is not in use, which is useful at a helm station or an open console.

No. The cover is intended for protection when the device is not in use. It must be removed to view the screen and use the fishfinder.

No. This is a removable accessory that is installed and removed by hand.

It is relevant if the STRIKER 5-inch remains exposed to the cockpit, sunlight, spray, or onboard storage between outings.

No. It is a mechanical protection accessory, with no electrical power supply or network connection.

The reference corresponds to the Garmin protective cover for STRIKER / STRIKER Vivid 5-inch units.

No, the cover protects the front face of the unit and does not require removing the mounting bracket.

No. It primarily protects the front panel and screen. The connectors and cables at the rear remain dependent on the fishfinder installation.

Yes, 010-13130-00 is an original Garmin reference for STRIKER-compatible devices.

Check that your device is a STRIKER, STRIKER Plus, or STRIKER Vivid in 5-inch size. A 7-inch or 9-inch model requires a different cover.

Yes, this is typically useful on an open helm or exposed station, where the screen may remain in direct sunlight or be exposed to dust and spray while at anchor.

Yes, it is designed as a removable cover to be removed before using the device.

The part number to order for this STRIKER / STRIKER Vivid 5-inch cover is 010-13130-00.